Find Parts That Fit Your Vehicle

BMW Suspension Parts

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
$ 800.00 USD
Free Shipping
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 9 Business Days
$ 413.38 USD
Free Shipping
$ 413.38 USD
Free Shipping
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

AST Suspension - Corporate Logo
T#:7640374
Part#: ASTLS-21-080
In Stock at Vendor
$ 461.99 USD
Free Shipping
$ 461.99 USD
Free Shipping
AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On
Show More Show Less

AST Suspension - Corporate Logo
T#:590105
Part#: ASTLS-14-2686
In Stock at Vendor
$ 242.00 USD
Free Shipping
$ 242.00 USD
Free Shipping
AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:12075
Part#: E9X-GPN-TOE
Ships on Sep 16, 2026
$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping
These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:3093
Part#: E9X-GPN-FOLB
Ships on Sep 16, 2026
$ 519.80 USD
Free Shipping
$ 519.80 USD
Free Shipping
These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:338369
Part#: 33327749778
Ships on Sep 15, 2026
Starting at $ 198.94 USD
Free Shipping
Starting at $ 198.94 USD
Free Shipping
Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

Sold Individually.
Show More Show Less

AST Suspension - Corporate Logo
T#:1211227
Part#: TMA-B19-A1-20F
Back Ordered
$ 608.00 USD
Free Shipping
$ 608.00 USD
Free Shipping

AST Suspension - Corporate Logo
T#:1211229
Part#: TMA-B07-A1-20F
Back Ordered
$ 608.00 USD
Free Shipping
$ 608.00 USD
Free Shipping