BMW Suspension Parts

TC Kline Single Adjustable Street/Track Coilover Kit - E9x M3 ...

T#:594672

Part#: TCKE9XMSINGLEKIT

Ships in 1 Business Day

$ 2,478.99 USD

Add to Wish List

Qty

$ 2,478.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 300#F/600#R springs .

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E46 non-Xi ...

T#:594671

Part#: TCKE46SINGLEKIT

Ships in 1 Business Day

$ 2,554.99 USD

Add to Wish List

Qty

$ 2,554.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Race - ...

T#:1331977

Part#: TCKF8XSINGLEDBL2

Ships in 2 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline Coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track-proven spring rates: 400#F / 700#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E9x non-M RWD ...

T#:594676

Part#: TCKE9XSINGLEKIT

Ships in 1 Business Day

$ 2,484.99 USD

Add to Wish List

Qty

$ 2,484.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 300#F/600#R springs .

Show More Show Less

TC Kline Double Adjustable Street/Track Coilover Kit - E9X M3/ E82 1M...

T#:594686

Part#: TCKE9XMDBLKIT

Ships in 2 Business Days

$ 3,638.99 USD

Add to Wish List

Qty

$ 3,638.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/700#R springs .

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - 3 Bolt ...

More aggressive for track setups.

T#:400851

Part#: TCKF8XDBLKIT

Ships in 3 Business Days

$ 3,497.99 USD

Add to Wish List

Qty

$ 3,497.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/700#R springs .

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - Z3

T#:594684

Part#: TCKZ3SINGLEKIT

In Stock

$ 2,354.99 USD

Add to Wish List

Qty

$ 2,354.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/400#R springs .

Show More Show Less

TC Kline Double Adjustable Street/Track Coilover Kit - E46 RWD ...

T#:594687

Part#: TCKE46DBLKIT

Ships in 6 Business Days

$ 3,514.99 USD

Add to Wish List

Qty

$ 3,514.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .

Show More Show Less

TC Kline Racing Double Adjustable Street/Track Coilover Kit - Street ...

T#:594691

Part#: TCKF8XSINGLEDBL

Ships in 6 Business Days

$ 3,095.99 USD

Add to Wish List

Qty

$ 3,095.99 USD

Add to Wish List

This TC Kline coilover kit features: Proprietary, single adjustable front and double adjustable rear Koni dampers Camber plates Recommended, track proven spring rates: 300#F/600#R Looking for different spring rates? Give us a call - we're happy to help. Designed and tested on the street and the track - TC Kline Racing Coilovers are found in hundreds of competition vehicles and daily-driven vehicles alike. Precisely-valved, rebound-adjustable, Koni shocks are matched with TC Kline's VVS high tensile alloy springs. TC Kline's VVS springs feature different free heights - designed to be interchangeable without having to reset ride height. This coilover system is built to meet the evolving demands you'll put on your car - adjustable camber, adjustable rebound, and replaceable springs (which are readily available) all allow to compensate for changes in driving habits, tire selection, track and road surfaces, and of course, a desire for a firmer or softer ride!

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E36

T#:594681

Part#: TCKE36SINGLEKIT

Back Ordered

$ 2,554.99 USD

Add to Wish List

Qty

$ 2,554.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .

Show More Show Less

TC Kline Double Adjustable Street/Track Coilover Kit - E9X non-M ...

Requires M3 Rear Lower Spring Arms

T#:594688

Part#: TCKE9XDBLKIT

Ships in 2 Business Days

$ 3,488.99 USD

Add to Wish List

Qty

$ 3,488.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 300#F/600#R springs .

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E30

T#:594683

Part#: TCKE30SINGLEKIT

Ships in 2 Business Days

$ 2,067.99 USD

Add to Wish List

Qty

$ 2,067.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/400#R springs .

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E9x XI ...

T#:594679

Part#: TCKE9XXISINGLE

Ships in 2 Business Days

$ 2,580.99 USD

Add to Wish List

Qty

$ 2,580.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 300#F/600#R springs .

Show More Show Less

TC Kline Racing Camber Plates - F80/82/83 M3 M4 & F87 M2 Comp ...

For use with aftermarket coilovers & TC Kline Racing F8X Suspension Kits only - Replaces 3 & 5-Bolt Front Strut Mounts

T#:401222

Part#: TCKF8XCP

In Stock

$ 538.00 USD

Add to Wish List

Qty

$ 538.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

TC Kline Racing Camber Plates - BMW F30/32/33/36 (w/ 3-Bolt Mounts) ...

For use with TC Kline Racing Coilovers Only - Replaces 3-Bolt Front Strut Mounts

T#:401223

Part#: TCKF30CP

In Stock

$ 518.00 USD

Add to Wish List

Qty

$ 518.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

TC Kline Racing Camber Plates - BMW F87 M2 (Non-Comp)

For use with TC Kline Racing Coilovers Only - Replaces 6-Bolt Front Strut Mounts

T#:401221

Part#: TCKF87CP

Ships in 2 Business Days

$ 518.00 USD

Add to Wish List

Qty

$ 518.00 USD

Add to Wish List

Add camber to your BMW with TC Kline Racing's camber plates!

TC Kline Racing Camber Caster Plates - E36 E9X

T#:401266

Part#: TCKE36CAMPLA

Ships in 2 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it. NOTE: Will not fit with Bilstein Struts/Shocks. Can only be used with Linear style springs. Will not fit OE-Style Progressive / Barrel style springs. Fits the following BMW's 1992-1999 E36 BMW - 318ti 318i/is/ic 323i/is/ic 325i/is 328i/is/ic M3 2006-2013 E9X BMW - 325i/xi 328i/xi 330i/xi 335i/is/ix M3

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

Front Mount Camber Plates 3 Bolt Top - F82 M4

3-Bolt Fitment only, Will Not Fit Factory Struts

T#:554063

Part#: TMA-B15-A2-20F

Back Ordered

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The plates are made out of an exotic high grade aluminum and the bearing plus its carrier are made within very small tolerances that results in a unique noise free pillowball setup. AST uses the same materials and bearings as they use in the aviation industry. That is the reason the the top mounts are almost free of maintenance. AST guarantees a good quality product.

Show More Show Less

TC Kline Racing Camber Caster Plates - E46

T#:401265

Part#: TCKE46CAMPLATE

Ships in 2 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it.

Fits the following BMW's:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3

Show More Show Less

AST Suspension Front Top Mount Set R55-R61

T#:1211229

Part#: TMA-B07-A1-20F

Back Ordered

$ 608.00 USD

Add to Wish List

Qty

$ 608.00 USD

Add to Wish List

AST Suspension Front Top Mount Set F56+

T#:1211227

Part#: TMA-B19-A1-20F

Back Ordered

$ 608.00 USD

Add to Wish List

Qty

$ 608.00 USD

Add to Wish List

Schwaben Ball Joint Removal Tool 20-80mm

T#:379416

Part#: 008958SCH01A

In Stock

Sale - Save 25% $ 96.99

This product was last offered at the strikethrough price on
05-02-2026

$ 72.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 96.99

This product was last offered at the strikethrough price on
05-02-2026

$ 72.74 USD

Add to Wish List

This ball joint separator has a wider jaw opening for vehicles needing a larger jaw opening. Popular on cars with thicker a-frames.

Schwaben BMW Control Arm Bushing Tool Kit - E30 E36 E46 Z3 Z4 ...

T#:557331

Part#: 025770SCH01A

In Stock

Sale - Save 10% $ 210.99

This product was last offered at the strikethrough price on
05-03-2026

$ 189.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 210.99

This product was last offered at the strikethrough price on
05-03-2026

$ 189.89 USD

Add to Wish List

The Schwaben control arm bushing tool kit allows you to easily remove and replace your front control arm bushings without removing the control arm from your vehicle.

Schwaben Wheel Mount Kit & Magnetic Caster/Camber Gauge

T#:385959

Part#: 010891SCH01AKT

In Stock

Sale - Save 3% $ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 403.99

This product was last offered at the strikethrough price on
05-03-2026

$ 392.33 USD

Add to Wish List

Perform your own caster and camber adjustments with this professional kit

Toe Alignment Gauge

T#:386443

Part#: 99374

Ships in 6 Business Days

Sale - Save 3% $ 128.99

This product was last offered at the strikethrough price on
05-02-2026

$ 125.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 128.99

This product was last offered at the strikethrough price on
05-02-2026

$ 125.12 USD

Add to Wish List

Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.

For wider wheel bases use T#386442!

Show More Show Less

Schwaben - BMW Suspension Install Tool Kit

T#:366822

Part#: S45CKT

In Stock

Sale - Save 22% $ 235.99

This product was last offered at the strikethrough price on
05-02-2026

$ 182.95 USD

Add to Wish List

Qty

Sale - Save 22%

$ 235.99

This product was last offered at the strikethrough price on
05-02-2026

$ 182.95 USD

Add to Wish List

If you're refreshing your struts and springs this tool is a must, properly compress the springs, easily remove and install the strut nut, and smoothly remove the spindles.

Features:

Spring Compressor
Strut Nut Sockets
Spindle Spreader

Show More Show Less

5 Piece Strut Nut Socket Kit

T#:377177

Part#: 003046SCHKT

In Stock

Sale - Save 23% $ 153.99

This product was last offered at the strikethrough price on
05-02-2026

$ 119.21 USD

Add to Wish List

Qty

Sale - Save 23%

$ 153.99

This product was last offered at the strikethrough price on
05-02-2026

$ 119.21 USD

Add to Wish List

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Kit Features:

18mm
19mm
21mm
22mm
24mm

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results