5100 Series AST Coilovers

T#:27205370

Part#: ACU-B1301S

Back Ordered

$ 2,586.99 USD

Add to Wish List

Qty

$ 2,586.99 USD

Add to Wish List

5100 Series AST Coilovers - MINI F55 F56 F57

T#:26171671

Part#: ACU-B1402S

Back Ordered

$ 3,213.00 USD

Add to Wish List

Qty

$ 3,213.00 USD

Add to Wish List

5100 Series Shock Absorbers for MINI

Enhance your MINI's performance with the 5100 Series shock absorbers, featuring innovative inverted/upside-down technology. These shock absorbers utilize race-proven design to provide exceptional strength and improved suspension geometry, ensuring optimal performance on both road and track environments. With the 5100 Series suspension, enjoy better performance than standard twin-tube designs, thanks to its adjustability and rebound control. The Monotube design separates oil and nitrogen, allowing for a larger piston and increased damper performance. This results in enhanced grip, control, and driver feedback. Additionally, the set includes front top mounts and is rebuildable for long-term use.

Benefits:

Enhanced performance compared to standard twin-tube designs
Innovative inverted technology for better suspension geometry
Adjustable rebound for personalized driving experience
Monotube design increases damper performance and sensitivity
Rebuildable set for long-term durability

Show More Show Less

AST 5200 Series Coilovers - E9X M3

T#:24643799

Part#: RIV-B1603SD

Back Ordered

$ 6,010.00 USD

Add to Wish List

Qty

$ 6,010.00 USD

Add to Wish List

AST 5300 Series Coilovers - 2021+ BMW M3 G80 / M4 G82

T#:29898448

Part#: RAC-B2112SD

Back Ordered

$ 8,127.00 USD

Add to Wish List

Qty

$ 8,127.00 USD

Add to Wish List

Are you the most dedicated enthusiast on the race track? Elevate your racing game to a championship level with the AST 3-WAY MOTORSPORT SUSPENSION. This advanced system empowers you to challenge your vehicle by independently adjusting rebound and low- and high-speed compression with a remote reservoir, providing distinct feedback and a unique driving sensation with each setting. ### Key Features: **Inverted Strut Design:** Built to withstand heavy side loads and braking forces, ensuring peak performance under intense conditions. **MONOTUBE Coilover Design:** Both front and rear dampers utilize this design, offering consistent performance and superior heat dissipation. **Adjustable Spring Rates:** Allows you to fine-tune your vehicle's suspension to meet your specific needs. **Rebound Adjustment:** With 12 distinct positions, you can control the damper's return to extension, affecting how the vehicle responds after compression and providing a unique driving experience with each setting. **Compression Adjustment:** Customize the suspension's response to compression with separate low- and high-speed controls: - **Low-Speed Compression:** Manages the suspension’s reaction to gentle, gradual forces. - **High-Speed Compression:** Handles rapid, forceful impacts. ### Benefits: - **Improved Handling:** Adjusting rebound and compression settings helps reduce body roll during cornering, enhancing responsiveness and maintaining tire contact for better traction. - **Customized Ride Comfort:** Fine-tune compression adjustments to balance performance and comfort, tailoring the ride quality to your preferences. - **Enhanced Front-End Grip:** Camber-adjustable front top mounts provide more wheel adjustment, transforming front-end grip and offering better control over your vehicle’s geometry. ### Additional Features: - **Solid Rear Top Mounts:** Ensure durability and stability under demanding conditions. With the AST 3-WAY MOTORSPORT SUSPENSION, you can fine-tune and customize three critical aspects of your vehicle's suspension, transforming your driving experience and elevating your performance. Designed for the most dedicated racing enthusiasts, this suspension system excels on both the road and the track.

Show More Show Less

AST 5300 Series Coilovers - E9X M3

T#:24643800

Part#: RAC-B1603SD

Back Ordered

$ 7,209.00 USD

Add to Wish List

Qty

$ 7,209.00 USD

Add to Wish List

AST 2016-2021 BMW M2 F87 / Competition LCI 5200 Series Coilovers ...

T#:38621397

Part#: RIV-B2104SD

Back Ordered

$ 6,714.00 USD

Add to Wish List

Qty

$ 6,714.00 USD

Add to Wish List

Front Drop Links - Set 258mm to 276mm

T#:31522875

Part#: DLA-MINF-S

Back Ordered

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

AST Suspension Adjustable Lowering Springs - BMW G80 M3, G82 M4, G87 ...

T#:26738336

Part#: ASTALS-21-004

In Stock

5% off MSRP $ 1,235.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,173.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,235.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,173.99 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW. A major benefit of AST's ALS kit is direct compatibility with all stock factory suspension systems, such as adaptive/electronic suspension. Suspension ride height adjustments can be made without negatively affecting the electronic adjustment system or your BMW's driving dynamics. Product Details: Fits G87 M2 / G80 M3 / G82 M4/CSL and Competition Models with xDrive or RWD Optimized spring rates Front and Rear for improved dynamics Compatible with Adaptive M factory dampers w/ OEM EDC Lowers vehicle by 20-46mm front and 10-36mm rear Developed to be one of the lowest ride height ranges available for G series BMWs

Show More Show Less

Bav Auto Trailing Arm Bushing and Ball Joint Tool - Master Set ...

T#:580410

Part#: B8800100

In Stock

Sale - Save 3% $ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Remove and install the three bushings and ball joints that are pressed into the rear trailing arm. Use this one tool kit for on-vehicle or off-vehicle removal and replacement of the Rear Trailing Arm Bushing, Outer Upper Control Arm Bushing (ball joint) and Outer Lower Control Arm Bushing (ball joint). This tool is designed to work on E36 3-series (except E36 318ti), E46 3-series, E83 X3 and E85/E86 Z4 Coupe & Roadster.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Bav Auto Rear Subframe Bushing Press - E88 E9X BMW

T#:580432

Part#: B8800127

In Stock

Sale - Save 3% $ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

The Bav Auto Rear Subframe Bushing Press allows you to remove and install rear subframe bushings while the subframe is still in the vehicle, saving you several hours of labor.

Burger Motorsports Billet Strut Cross Braces - Black - G20 M340i 330i...

T#:637424

Part#: BMSG20BSCB-BLK

Ships in 7 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Bav Auto Rear Subframe Bushing Press Tool

T#:580407

Part#: B8800097

In Stock

Sale - Save 3% $ 383.99

This product was last offered at the strikethrough price on
05-03-2026

$ 372.47 USD

Add to Wish List

Qty

Sale - Save 3%

$ 383.99

This product was last offered at the strikethrough price on
05-03-2026

$ 372.47 USD

Add to Wish List

Allows you to both remove and install rear subframe to body bushings without removing your subframe, saving you hours of labor from having to disassemble suspension components.

AST Suspension Adjustable Top Mount Camber Plates - OEM Damper - BMW ...

T#:32980571

Part#: TMA-B20-A2-20F

In Stock at Vendor

$ 1,140.00 USD

Add to Wish List

Qty

$ 1,140.00 USD

Add to Wish List

The latest innovative design from the expert engineers at AST Suspension is a solution for BMW owners seeking additional camber adjustment while retaining the factory struts. AST Suspension’s lowering spring and adjustable lowering spring sets can be combined with the camber-adjustable top mounts, meaning customers who have already equipped their vehicles with those components can now improve camber adjustability without losing the electronic dampers’ OE functionality. These new top mounts provide an additional 0° to -4.2° of camber adjustment, improving on factory adjustments done via the OE arms. AST Suspension opted for solid bushings made from 7075 high-grade aluminum with stainless steel inserts, manufactured in Japan. AST Suspension has employed these bearings in various applications for over 25 years, and they are trusted for their long-lasting anti-wear characteristics that have led to success in endurance racing. As an added benefit, these motorsport-quality bearings are effectively silent, preserving factory NVH. AST Suspension specializes in producing suspension components for vehicles serving regular street use and competition purposes such as race, rally, autocross, and more. The company has continuously evolved since its establishment in 2000 and has always taken pride in its work. By combining in-house design and production with technical know-how, industry experience, and road-and-track testing, AST Suspension consistently produces exceptional suspension components at a competitive price. Features: Adjustment from 0 degrees to -4.2 degrees of camber Retains full functionality of OE dampers Compatible with AST Lowering Springs and Adjustable Lowering Springs

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - G20 M340i 330...

T#:637423

Part#: BMSG20BSCB-SIL

Ships on Sep 1, 2026

$ 255.99 USD

Add to Wish List

Qty

$ 255.99 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Front Mount Camber Plates 3 Bolt Top - F82 M4

3-Bolt Fitment only, Will Not Fit Factory Struts

T#:554063

Part#: TMA-B15-A2-20F

Back Ordered

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The plates are made out of an exotic high grade aluminum and the bearing plus its carrier are made within very small tolerances that results in a unique noise free pillowball setup. AST uses the same materials and bearings as they use in the aviation industry. That is the reason the the top mounts are almost free of maintenance. AST guarantees a good quality product.

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowerings Springs - G20 M340i

T#:9545176

Part#: ASTLS-21-031

In Stock at Vendor

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

After doing a series of exterior mods, carbon, wheels, etc., you may be due for a lowering treatment. This kit for your G20 3 Series from AST Suspension, will allow you to sit 30mm lower in the front and 30mm lower in the rear, all at an affordable price!

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

AST Suspension Adjustable Lowering Springs - BMW F95/F96 2020+ X5M X6...

T#:49857444

Part#: ASTALS-21-012

In Stock at Vendor

10% off MSRP $ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,332.00 USD

Add to Wish List

Qty

10% off MSRP

$ 1,480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,332.00 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW.

Show More Show Less

AST Suspension Adjustable Lowering Springs - BMW M5 G99

T#:41728762

Part#: ASTALS-21-021

In Stock at Vendor

$ 1,332.00 USD

Add to Wish List

Qty

$ 1,332.00 USD

Add to Wish List

AST Adjustable Lowering Springs (ALS) are a great alternative to traditional lowering springs as they allow for a range of adjustment, not a fixed ride height. This is perfect for someone looking to dial in the exact ride height desired on their BMW. A major benefit of AST's ALS kit is direct compatibility with all stock factory suspension systems, such as adaptive/electronic suspension. Suspension ride height adjustments can be made without negatively affecting the electronic adjustment system or your BMW's driving dynamics.

Show More Show Less

Lowering Springs Set - F56 MINI Cooper

T#:31556191

Part#: ASTLS-17-069

Back Ordered

$ 212.99 USD

Add to Wish List

Qty

$ 212.99 USD

Add to Wish List

Lowering Springs Set - F56 MINI Cooper S/JCW

T#:27005166

Part#: ASTLS-17-070

Back Ordered

$ 213.00 USD

Add to Wish List

Qty

$ 213.00 USD

Add to Wish List

Lowering Springs - R59 MINI Roadster S/JCW

T#:31522973

Part#: ASTLS-14-1344

Back Ordered

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Lowering Springs Set - R58 MINI Coupe S/JCW

T#:31556130

Part#: ASTLS-14-1341

Back Ordered

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Lowering Springs Set - R56 MINI Cooper

T#:31522868

Part#: ASTLS-14-1333

Back Ordered

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

Lowering Springs Set - R57 MINI Convertible S/JCW

T#:31556190

Part#: ASTLS-14-1338

Back Ordered

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Lowering Springs Set - R53 MINI Cooper S/JCW

T#:27205371

Part#: ASTLS-14-1330

Back Ordered

$ 270.99 USD

Add to Wish List

Qty

$ 270.99 USD

Add to Wish List

AST Suspension Front Top Mount Set R55-R61

T#:1211229

Part#: TMA-B07-A1-20F

Back Ordered

$ 608.00 USD

Add to Wish List

Qty

$ 608.00 USD

Add to Wish List

AST Suspension Front Top Mount Set F56+

T#:1211227

Part#: TMA-B19-A1-20F

Back Ordered

$ 608.00 USD

Add to Wish List

Qty

$ 608.00 USD

Add to Wish List

Bav Auto Trailing Arm Bushing Tool Set - E82/88 E84 E9X

T#:587611

Part#: B8800101

In Stock

Sale - Save 10% $ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 240.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.89 USD

Add to Wish List

Remove and install the rear trailing arm bushings and upper and lower rear control arm bushings with one toolset without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90, E91, E92, E93 model cars.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

T#:580366

Part#: B8800042

Ships on Jan 18, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Bushing Tool

T#:580370

Part#: B8800047

In Stock

Sale - Save 10% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Remove and install rear trailing arm bushings without removing the trailing arms from the vehicle.

Bav Auto Shock and Strut Nut Tool

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

BMW Bav Auto Rear Ball Joint Press

T#:580356

Part#: B8800028

In Stock

Sale - Save 3% $ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Allows for removal / replacement of lower rear ball joint, enabling you to get this job done at home, saving you time and money on labor.

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Control Arm Bushing Press Tool - E30 E36 E46 Z3 Z4

T#:580360

Part#: B8800033

Ships on Sep 1, 2026

Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Removes and installs control arm bushings while leaving the control arm on the car.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts

Sub-Categories

5100 Series Shock Absorbers for MINI

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results