BMW Suspension Parts

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Sep 3, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

aFe Control Adjustable Sway Bar End Links - Front & Rear - F80 M3, F8...

T#:825812

Part#: 442-502001-L

Ships in 1 Business Day

Sale - Save 5% $ 522.00

This product was last offered at the strikethrough price on
08-03-2026

$ 495.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 522.00

This product was last offered at the strikethrough price on
08-03-2026

$ 495.90 USD

Add to Wish List

Improve handling and eliminate sway bar preload with aFe Control’s adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when turning one direction versus the other. Factors like lowering springs can end up with uneven suspension heights which can lead to sway bar preload. If you have adjustable coilovers and are corner balancing the vehicle, it is especially important to zero out your sway bar preload to get consistent handling. Made with high-quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the end links can be adjusted on-car without removal. Whether you’re setting your car up for the street or track, aFe Control will get you there! Billet Aluminum Adjusters: aFe's adjusters are CNC machined out of 6061-T6 aluminum and anodized blue with laser etched logo. Quality Rod Ends: For superior quality and reliability, aFe uses PTFE-lined Aurora rod ends. Emissions Disclaimer: This product does not require a CARB EO#.

Show More Show Less

Loaded Front Strut - Front Right

T#:1211239

Part#: 882418

In Stock

$ 106.99 USD

Add to Wish List

Qty

$ 106.99 USD

Add to Wish List

MINI R56 Front Left Loaded Front Strut

T#:1211235

Part#: 882419

Ships in 4 Business Days

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.

Pre-Assembled Convenience: Comes as a complete unit, saving time and effort during installation.
Easy Installation: Designed for quick replacement with standard hand tools, no special tools required.
Efficient Replacement: Ideal for restoring proper suspension function and ride quality without the hassle of disassembling individual components.
Pair Replacement Recommended: For optimal performance and balance, it is advised to replace struts in pairs.
Warranty: Comes with a 2-year/30,000-mile warranty, ensuring reliability and peace of mind.

Show More Show Less

MINI R53 Loaded Front Strut - Front Right

T#:1211241

Part#: 882423

Ships in 1 Business Day

$ 138.99 USD

Add to Wish List

Qty

$ 138.99 USD

Add to Wish List

MINI R53 Loaded Front Strut - Front Right offers a convenient solution for replacing your front strut, spring, and strut mount with a pre-assembled unit. This fully assembled strut assembly eliminates the need for special disassembling tools, allowing for a quick and easy replacement using standard hand tools.

Pre-assembled unit for easy installation
No special tools required for assembly
Quick replacement with standard hand tools
Recommended to replace struts in pairs for balanced performance
2 years/30,000-mile warranty
Stock suspension compatibility

Show More Show Less

MINI R53 Loaded Front Left Strut

T#:1211240

Part#: 882422

Ships on Sep 4, 2026

$ 138.99 USD

Add to Wish List

Qty

$ 138.99 USD

Add to Wish List

MINI R53 Loaded Front Left Strut offers a convenient, pre-assembled solution for replacing your front strut, spring, and strut mount. This fully assembled unit eliminates the need for special disassembling tools, allowing for a quick and straightforward installation with standard hand tools.

Pre-Assembled Convenience: Saves time and effort by providing a complete front strut assembly that is ready to install.
Easy Installation: Designed for a hassle-free replacement with standard hand tools, no special equipment needed.
Recommended Pair Replacement: For optimal performance and safety, it is advised to replace struts in pairs.
Durable Warranty: Backed by a 2-year or 30,000-mile warranty, ensuring long-term reliability and peace of mind.
Stock Suspension: Maintains your vehicle's original ride quality and handling characteristics.

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

In Stock

$ 289.00

This product was last offered at the strikethrough price on
08-10-2026

$ 271.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 289.00

This product was last offered at the strikethrough price on
08-10-2026

$ 271.99 USD

Limited Qty Sale

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

Front Mount Camber Plates 3 Bolt Top - F82 M4

3-Bolt Fitment only, Will Not Fit Factory Struts

T#:554063

Part#: TMA-B15-A2-20F

Back Ordered

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The plates are made out of an exotic high grade aluminum and the bearing plus its carrier are made within very small tolerances that results in a unique noise free pillowball setup. AST uses the same materials and bearings as they use in the aviation industry. That is the reason the the top mounts are almost free of maintenance. AST guarantees a good quality product.

Show More Show Less

GSP Loaded Front Strut - Right - E82, E88, E90, E91, E92, E93 ...

T#:389678

Part#: 827214

Ships in 2 Business Days

$ 188.99 USD

Add to Wish List

Qty

$ 188.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less

GSP Loaded Front Strut - Left - E82, E88, E90, E91, E92, E93 ...

T#:389680

Part#: 827213

Ships in 2 Business Days

$ 188.99 USD

Add to Wish List

Qty

$ 188.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E82/88 BMW 128i 135i

E90/92 BMW 325i 328i 328i xDrive 330i 335i

Show More Show Less