BMW Suspension Parts

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Performance Rear Upper Adjustable Control Arm Set - BMW E9X

T#:22591963

Part#: AK-136

In Stock

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Don't let poor road or track conditions affect your vehicle's alignment, leading to excessive tire wear and compromised handling. Improve your suspension and achieve precise alignment with Godspeed Project's rear camber arms!

These camber arms enhance stability at high speeds, thanks to their precise alignment adjustments. The solid spherical bushings resist wear and outperform conventional rubber bushings. With heat-treated ball and hard chrome plated alloy steel construction, these camber arms offer exceptional strength and durability.

This cost-effective performance upgrade provides extended adjustment ranges, versatility, and improved road feel, thanks to their solid design. It's important to note that realignment is recommended after installation, and these camber arms are ideal for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Blue - G20 M340i 330i,...

T#:637422

Part#: BMSG20BSCB-BLUE

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - G20 M340i 330i, ...

T#:637421

Part#: BMSG20BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Constructed from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Blue - BMW G01 X3, G02 X4, F...

T#:39126850

Part#: BMSBILSCB-BLU

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

E9X Adjustable Trailing Arms With Spherical Bearings

T#:31622602

Part#: AK-261-A

Ships in 7 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Billet Strut Cross Braces For G30 G14 G15 G16

T#:27138580

Part#: BMSG30SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the G30, G14, G15, and G16 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Black - BMW G01 X3, G02 X4, ...

T#:39126853

Part#: BMSBILSCB-BLK

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

Rear Adjustable Trailing Arm Kit for E9X

T#:26005239

Part#: AK-137

Ships in 3 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Improve your BMW's suspension and alignment precision with Godspeed Project's Rear Trailing Arms. Designed to combat poor road or track conditions, these trailing arms offer stability and reduced tire wear, enhancing vehicle handling.

Key Benefits:

Precise alignment adjustment for stability at high speeds
Solid spherical bushings resist wear, ensuring durability
Heat-treated ball and hard chrome plated alloy steel construction for strength
Stainless steel race with PTFE fabric lining provides self-lubrication, minimizing wear
Affordable performance upgrade with increased adjustment ranges and versatility
Solid design offers improved road feel and handling feedback

Ensure optimal performance and alignment with Godspeed Project's Rear Trailing Arms, ideal for track use to enhance suspension reinforcement.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Red - BMW G22/G23/G26 ...

T#:46924996

Part#: G22BSCB-RED

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Adjustable Rear Camber And Toe Kit W/ Sppherical Bearings

T#:14386779

Part#: AK-210-A

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Godspeed Project spherical bearing adjustable control arms are designed to replace factory bushing-type rods. The spherical bearing helps to improve both vehicle acceleration and deceleration by limiting the moving of the lower arms. These rods will also increase steering response and reduce roll at corners, adjustable turnbuckle allows for adjustment of caster angle for more precise wheel alignment. Heavy Duty Steel Alloy Rods And Turnbuckle Ends Allows Adjustability To Correct Suspension Geometry Improved Spherical Bearing Over Factory Rubber Bushings Anti-Corrosion Powder Coat Finish Helps Improve Both Acceleration And Deceleration NOTE: **This item is not designed for vehicles with EXCESSIVE camber or AIR SUSPENSIONS.**; No Installation Instructions; Install By Experienced Professionals Highly Recommended

Show More Show Less

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

T#:50837389

Part#: RE.RBE46

Special Order: No Guaranteed ETA

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

Rogue Engineering V-Brace Chassis Support - E46 M3

T#:12643107

Part#: RE.899

Ships in 9 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

An integral part on E46 M3 is the rear chassis "V-Brace" (BMW # 33312229899) found on all 2001-06 Convertibles and Coupe (including the CSL). This brace attaches to the outward points of the rear chassis and to the area near the rear subframe carrier. Since some of these vehicles are now over 20 years old, we have been seeing more and more of these start to rust away. We began studying the OEM part, curious as to why they were starting to rust away. We found that the two arms of the "V" are made from 38mm x 12mm (1.5" x 0.5") hollow square steel tubing, pressed ends and welded to a junction plate joining them with welds holding the arms at a specific angle. Since the arms are hollow, it helps keep the overall weight down, but does little to prevent corrosion since it is difficult to paint/coat a hollow tube. A Google search turned up very little other than used ones on eBay and new ones that turned out to be in short supply from the BMW dealer (not surprising since the car is over 20 years old). Determined to make something better, we began our engineering and R&D process. Goals of our Design; Modular design, since packaging and shipping something this large would probably be too expensive Costs would dictate material and manufacturing methods Lighter weight would be a secondary (or tertiary) goal, but also keeping in mind costs Corrosion resistant, so it would not rust from the inside out, like the OEM version After weighing the material, manufacturing and cost options, we decided to go with a fully CNC'd ACQ 6061-T6 aluminum assembly. The concept is to machine two identical arms (one part number) and have them joined with a "junction plate". The arms would be secured to the plate with Grade 8.8 grade hardware and the entire assembly would include replacement Grade 10.9 hardware to replace the original OEM hardware (which is probably original). Details of our Design; CNC'd 6061-T6 construction, secured with Grade 8.8 socket head cap screws. Included are replacement Grade 10.9 hardware to fit in the factory locations. About 4 lbs. fully assembled weight (vs. 6.25 lbs for OEM), about a 35% weight savings Anodized gray finish Modular design allows for one arm to be removed in case of exhaust removal requirement. Included in the Kit Two (2) arms of the brace assembly (they are idential) One (1) junction plate One (1) red spacer (this goes BETWEEN the brace and the chassis!) Two (2) blue spacers (these goes BETWEEN the brace and the chassis!) Four (4), M10 socket head cap screws Three (3), M10 flanged hex head bolts It is recommended that the holes used to mount the V-brace onto the car be cleaned before installation by running an M10x1.5 tap to clean each of the holes.

Show More Show Less

E36, E46, Z3 Rear Shock Mount Reinforcement (Sold Each)

T#:578621

Part#: B3300044

In Stock

Sale - Save 3% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

Qty

Sale - Save 3%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 8.68 USD

Add to Wish List

This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Upper Control Arm with Bushing - Right

T#:579752

Part#: 51569

In Stock

Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Qty

Sale - Save 80%

$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD

Add to Wish List

Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.

Traction-S Springs R56, R58

T#:31522919

Part#: LS-TS-MC-0001

Ships in 2 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Burger Motorsports Billet Strut Cross Braces - Blue - BMW G22/G23/G26...

T#:46924998

Part#: G22BSCB-BLU

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Silver - BMW G22/G23/G...

T#:46924997

Part#: G22BSCB-SIL

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Burger Motorsports Billet Strut Cross Braces - Black - BMW G22/G23/G2...

T#:46924999

Part#: G22BSCB-BLK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger Motorsports' strut braces are CNC machined from thick, lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a thick, solid one-piece design and give an exclusive look under the hood and extra stabilization to the chassis.

Show More Show Less

Godspeed Adjustable Sway Bar Links - 270 Mm-330 Mm

T#:46650389

Part#: SB-TR-220

Ships in 6 Business Days

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

BMS Billet Strut Cross Braces - Anodized Red - BMW G01 X3, G02 X4, F9...

T#:39126852

Part#: BMSBILSCB-RED

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - Anodized Silver - BMW G01 X3, G02 X4,...

T#:39126854

Part#: BMSBILSCB-SIL

Ships on Sep 1, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Burger Motorsports' Billet Strut Cross Braces are designed and made in the USA from billet aluminum in a solid one-piece design. These braces connect from the strut towers to the front radiator support, helping to reinforce your entire front end while also giving your BMW an exclusive under-hood appearance.

Show More Show Less

BMS Billet Strut Cross Braces - G29 BMW Z4

T#:27138575

Part#: BMSZ4SB

Ships on Sep 1, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

The Burger Motorsports Billet Strut Cross Braces for the 2019+ G29 BMW Z4 are designed and made in the USA from lightweight billet aluminum with the BMS logo engraved on the top middle. These strut braces are a solid one-piece design. These give an exclusive look under the hood and extra stabilization to the chassis. Easy 5-minute install. Simply remove your factory strut braces and replace them with the BMS units for better structural integrity and amazing looks under the hood. Sold in pairs. Available in Black, Silver, Blue, and Red anodized. The perfect addition to your G29 BMW Z4 engine bay Single-piece design made from a solid block of billet aluminum Improved chassis rigidity and structural integrity Decreased chassis flex during cornering Utilizes stock mounting bolts Direct bolt-on replacement. No drilling required Made in the USA

Show More Show Less

Rogue Engineering - E82/E9X Adjustable Rear Camber Link Set V2.0 ...

T#:35829340

Part#: RE_E9X_CAMNO

Ships in 8 Business Days

$ 595.00 USD

Add to Wish List

Qty

$ 595.00 USD

Add to Wish List

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less

Rogue Engineering Adjustable Rear Control Arms

T#:34885415

Part#: RE.ARCA.2.RE

Ships in 8 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...

T#:56001958

Part#: SPLRUAE9XKT2

Ships in 1 Business Day

$ 1,258.00 USD

Add to Wish List

Qty

$ 1,258.00 USD

Add to Wish List

This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links

Show More Show Less

Adjustable Rear Camber Arms W/ Spherical Bearings - E63/E64 6-Series ...

T#:46959248

Part#: AK-099-E

Ships in 7 Business Days

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Lowering a vehicle will often take it out of OE alignment specification. A large majority of OE suspension components do not have any camber or toe angle adjustment. Out-of-spec alignment will result in poor handling and results in premature uneven tire wear. This kit will help your lowered car not only drive better, but your tires will have a longer lifespan as well. Godspeed's camber kits are designed to be reliable for daily driving yet strong enough for high performance and race use.

Show More Show Less

Sway Bar Link - Front Right - E39

T#:579841

Part#: 53339

Special Order: No Guaranteed ETA

Sale - Save 20% $ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 16.99

This product was last offered at the strikethrough price on
05-03-2026

$ 13.59 USD

Add to Wish List

Common cause of clunking noises and a loss of handling performance.

Sway Bar Link - Front

T#:579821

Part#: 52501

Special Order: No Guaranteed ETA

Sale - Save 20% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Sway Bar Link - Front Left

T#:579840

Part#: 53338

Special Order: No Guaranteed ETA

Sale - Save 20% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Rear Suspension Carrier / Differential Mount - Front Left - E46 E83 ...

T#:579685

Part#: 50259

Special Order: No Guaranteed ETA

Sale - Save 20% $ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 25.99

This product was last offered at the strikethrough price on
05-03-2026

$ 20.79 USD

Add to Wish List

Rear subframe bushings are a common failure point, creating a clunking condition and unwarranted subframe shifting under load. Replace your bad bushings with these new units from Bavarian Autosport.