Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.
Product Features:
Fits the following BMWs:
1999-2006 E46 BMW All Submodels
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Condor's CNC machined control arm brackets are made from solid steel and are fitted with a solid hex-shaped bushing. Designed for the street or the track, they hold the control arm steady and eliminate "shimmy" caused by stock bushings. They sharpen steering and improve overall driving feel. Comparable to the NLA Treehouse E36 & E30 Eyeball Arms.
Easiest install of any aftermarket solution
Allow clearance for E30 M50 Conversion exhaust
Street Approved, marginal increase in NVH
Easy Installation, no need for a press
CNC machined steel construction
Solid design without the maintenance of spherical bearings
Heavy-Duty replaceable UHMW insert. Don't be misinformed, UHMW is the best material for these inserts. Delrin is not self-lubricating and will crack and degrade over time.
Powder coated white for corrosion resistance
Improve caster with M3 offset geometry
Keep proper steering geometry under high loads
Made in the U.S.A.
Fitment:
E30 84-91 3 Series
E36 92-98 3 series & Z3
Note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36
Be sure to measure your control arms to determine if you need 21mm or 23mm. Meyle makes a standard e46 control arm and a Heavy Duty control arm. Most HD arms have a hex that is larger in size (23mm). Lifetime Warranty
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.
Product Features:
Fits the following BMW's:
2008-2013 E82 BMW 128i 135i
2006-2012 E90/2 BMW 328i 335i
Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Condor's conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change). They've designed them offset to re-center the wheel and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms. You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.
Fitment:
Fits the following Meyle and Lemforder arms with 21-22MM Hex.
LEMFORDER ZHP - 31122282121 & 31122282122
LEMFORDER - 31126777851 & 31126777852
MEYLE HD - 31126777851 & 31126777852
*Please note that Meyle makes a standard e46 control arm and a Heavy Duty control arm. SOME HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.
Product Features:
Fits the following BMW's:
2008-2013 E82 BMW 128i 135i
2006-2012 E90/2 BMW 325i 328i 335i/is
The MMX Performance adjustable drop links are a great choice for any lowered or hard-driven BMW to zero the pre-load on your anti-roll bar geometry. Plus, by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handling and steering dynamics.
The sway bar end link attaches the front anti-roll bar ends to the front damper. The OEM links were made the length they are for a reason, to complement the standard ride height.
When your ride height is altered, your vehicle's anti-roll bar ends are pulled up. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable sway bar end links allow you to adjust back to zero preload on your anti-roll bar - allowing it to operate exactly as it should once again.
Motorsport-spec ball joint ends using high-strength Teflon-lined steel means a much more direct response when turning into corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.
The lightweight CNC-machined T6-6061 aluminum bodies are anodized in our beautiful MMX gloss black coating to look good and stay looking good.
Features:
Manufactured in the UK from Aircraft grade T6-6061 aluminum billet.
Complete OE replacements
Anodized in signature MMX Gloss black.
Heavy-duty ball joints to ensure a long life span.
325-365mm adjustment range.
Direct replacement – can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.
Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.
Each heavy-duty, high-articulation rear end link attaches the rear anti-roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminum links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.
As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage car.
Features:
Manufactured from Aircraft grade T6-6061 aluminum billet.
Complete OE replacements.
Our single-threaded ends make for easy length adjustment in-situ without having to detach and re-attach.
Each heavy-duty, high-articulation rear drop link.
Anodized in signature MMX Gloss black.
Heavy-duty ball joints to ensure a long life span.
Kit complete with everything you need.
Can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.
Rubber boots for longevity and durability.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with Hotchkis Performance Sway Bars.
Performance sway bars allow you to take corners aggressively while still keeping the wheels firmly planted and reducing body roll, all without reducing overall ride quality. Hotchkis sway bars feature powder coated tubular steel construction for maximum durability and stiffness. Every kit includes the essential components needed for an easy installation and to ensure you get the most from your sway bars.
Features:
Fits the following BMWs:
2008-2013 E90/2 BMW M3
Rally Road Productions, Inc. is a team supported by a group of people with great abilities in their area of expertise. From the "web guy" and driving instructor friends, to owners of various machine shops, they have surrounded ourselves with people that can be trusted to create and manufacture quality products. This is the key to ensuring everything that they sell will perform as it was intended. The goal is to increase customer satisfaction and make the customization or performance enhancement of your vehicle a more enjoyable venture.
Have you ever snapped a transmission brace under full throttle? NOT a fun experience. For that reason, Rally Road has come up with the very last transmission brace your E36 will ever need.
Back when the minds at BMW set out to design the E36's lower transmission support, they executed perfectly. A cast piece manufactured from lightweight aluminum would surely provide the proper support for the business end of the powertrain. This part functioned fine...mostly...when the vehicle was driven modestly. However, push it too hard and this brace becomes perfectly unusable when it snaps in half.
This upgraded piece is manufactured out of solid steel. Laser cut, precision CNC bent, and then tig welded together - this thing is ready to take a beating. Finish it off with a flawless black powder coat and what you have is a transmission brace that is as beautiful as it is bulletproof. Whether you're considering this as an alternative to an already broken piece or just shopping for your next mod, this is a must-have for ANY E36 owner.
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.
Product Features:
Fits the following BMW's:
2012+ F3X BMW All Submodels
2014+ F22/23 BMW All Submodels
Hotchkis Sport Suspension products have been developed with strength, reliability, fitment, appearance, and durability all factored into their products to ensure that customers are never left unsatisfied. Suspension components are exposed to not only the elements, but also constant ever changing forces that will push the limits of any performance component to its breaking point if not built to a superior quality. This is especially true in vehicles with lowered suspension. Make sure your suspension is ready for any abuse thrown its way with these High Performance Adjustable End Links.
Product Features:
Fits the following BMW's:
2012+ F3X BMW All Submodels
2014+ F22/23 BMW All Submodels