Upgrade your Mini's suspension with ALTA Adjustable Front Endlinks for the R55, R56, R57, R58, and R59 models. These endlinks allow for precise adjustment, optimizing your vehicle's handling and performance. Crafted with durability in mind, they offer enhanced stability and control, especially during aggressive driving. Installation is straightforward, making it easy to achieve the perfect setup for your Mini.

• Enhances suspension performance
• Allows for precise adjustment
• Improves handling and stability
• Durable construction for long-lasting reliability
• Easy installation process

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

• CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
• 2 Position, CNC Machined, TIG Welded Bar Ends
• Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
• 2 Stage Tangerine Orange, Powder-coated Finish
• Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2008-2013 E90/2 BMW M3

The MMX Performance adjustable drop links are a great choice for any lowered or hard-driven BMW to zero the pre-load on your anti-roll bar geometry. Plus, by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handling and steering dynamics.

The sway bar end link attaches the front anti-roll bar ends to the front damper. The OEM links were made the length they are for a reason, to complement the standard ride height.

When your ride height is altered, your vehicle's anti-roll bar ends are pulled up. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable sway bar end links allow you to adjust back to zero preload on your anti-roll bar - allowing it to operate exactly as it should once again.

Motorsport-spec ball joint ends using high-strength Teflon-lined steel means a much more direct response when turning into corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.

The lightweight CNC-machined T6-6061 aluminum bodies are anodized in our beautiful MMX gloss black coating to look good and stay looking good.

Features:

Manufactured in the UK from Aircraft grade T6-6061 aluminum billet.

Complete OE replacements

Anodized in signature MMX Gloss black.

Heavy-duty ball joints to ensure a long life span.

325-365mm adjustment range.

Direct replacement – can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.

Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.

Each heavy-duty, high-articulation rear end link attaches the rear anti-roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminum links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.

As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage car.

Features:

Manufactured from Aircraft grade T6-6061 aluminum billet.

Complete OE replacements.

Our single-threaded ends make for easy length adjustment in-situ without having to detach and re-attach.

Each heavy-duty, high-articulation rear drop link.

Anodized in signature MMX Gloss black.

Heavy-duty ball joints to ensure a long life span.

Kit complete with everything you need.

Can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.

Rubber boots for longevity and durability.

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

• CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
• 2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
• Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
• 2 Stage Tangerine Orange, Powder-coated Finish
• Direct Fit Installation, Requires No Modifications

Fits the following BMWs:
2007-2013 E90/2 BMW 335i

MINI R60 R61 M7 Rally Sport Suspension Kit - Stage 1

The ultimate upgrade for MINI enthusiasts seeking top-tier performance. Enhance your driving experience with improved handling and control, designed specifically for rally sport enthusiasts.

• Enhanced handling and control
• Specifically designed for rally sport enthusiasts
• Top-tier performance upgrade
• Tailored for MINI R60 R61 M7 models

Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.

• Specifically designed for MINI R60 and R61 models
• Provides enhanced handling and cornering performance
• Reduces body roll for better stability during aggressive driving
• Improves overall ride quality and comfort

Looking to reduce body roll and improve your handling? it turns out that aFe knows a thing or two about making your car handle. Not content to just offer air intake systems, aFe offers suspension components as well. These CNC-bent, powdercoated tubular aluminum sway bars are both lightweight and stiffer than stock. Each bar includes new polyurethane sway bar bushings and machined aluminum brackets.

Fits the Following BMWs:

E90 E92 E92 335i 335xi