Find Parts That Fit Your Vehicle

BMW Sway Bar Kits

The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.

Sub-Categories

Sort By:

Front Sway Bar Link - E46, Z4

T#:338081

Part#: 31351095694

In Stock

Starting at $ 36.52 USD

Add to Wish List

Starting at $ 36.52 USD

Add to Wish List

This is the standard front sway bar / swaybar link for BMW E46 and E85 Z4. It connects the sway bar to the strut. If you hear front end noise when going over bumps while turning we recommend you check these. Alternate BMW Part#31356780847 Sold individually

We also offer an upgraded link from Meyle with heavy duty ball joints for additional durability. See options below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 - Sorry not for Xi Models!
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Front Sway Bar Link - E30 E36 E34 E32 E31

T#:338082

Part#: 31351134582

Ships in 1 day

Starting at $ 47.46 USD

Add to Wish List

Starting at $ 47.46 USD

Add to Wish List

The ball-joint inside the link will eventually wear out. The problem gets worse if the rubber boot surrounding the joint is ripped. When the joint goes bad you can hear it clunk when going over bumps. Replacement of the link will help with the handling and feel of the car.

This item fits the following BMWs:
1984-1991 E30 BMW M3
To 10/1991 E36 BMW 325i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi

Show More Show Less

Steel Sway Bar Bracket - Single - E39 5-Series

Offers superior strength vs the OE bracket!

T#:1002335

Part#: 33552283159

In Stock

Sale - Save 10% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.99 USD

Add to Wish List

The stock aluminum sway bar brackets in the E39 5-Series suffer from a serious design flaw that has resulted in many people experiencing snapping and misshapen brackets, a mounting tab that is simply too weak. Not only was the OE bracket not designed to handle the loads required, but the aluminum construction was also easily fatigued over time, making an already questionable bracket weaker over time. This sub-par construction eventually leads to the mounting tab breaking off, releasing all tension on the sway bar, causing sloppy handling feel and knocking noises in the rear of your BMW. Luckily for all of us, the fix is simple. By swapping the construction from aluminum to steel, while maintaining all of the original dimensions, these brackets offer 3 times the mounting strength versus the OE brackets! This ensures that no matter how many track days or spirited weekends of driving your BMW sees, you can rest easy knowing your rear sway bar is securely mounted. To top it all off, these brackets are also zinc-coated, keeping away rust and corrosion for years. Why go steel E39 brackets instead of using E38 brackets? Fitment. Although the E38 bracket is a commonly suggested upgrade, it does require a bit of modification to fit properly and usually results in a bit of bushing compression, making your sway bar difficult to install.

Show More Show Less

Rear Sway Bar End Links - G20 / G29 / A90 / A91

T#:22525948

Part#: WAS-427

In Stock

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01

Show More Show Less

Front Sway Bar End Links - Toyota Supra A90 / A91

T#:22525958

Part#: WAS-413

Back Ordered

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

Verkline is delighted to introduce their Front Sway Bar End Links, a product that has undergone a meticulous development process, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. This journey of innovation has led to the creation of high-performance sway bar end links, now available for automotive enthusiasts. Key Advantages: User-Friendly Length Adjustability: These end links offer effortless length adjustment, allowing users to achieve ideal corner weights without sway bar preload and ensuring consistent suspension heights. Enhanced Strength and Rigidity: Verkline's design prioritizes increased strength and rigidity, resulting in improved handling performance and better control. Replaceable High-Quality Uniballs: In the event of ball joint wear, these end links are designed to allow the replacement of easily accessible, high-quality uniballs, eliminating the need to change the entire component. Noteworthy Features: Bolt-In Kit: The installation process is straightforward and requires no modifications, ensuring a hassle-free setup. Pre-Assembled Links: The end links are conveniently pre-assembled, simplifying the installation procedure. Robust Pins: Precision-machined from high-strength steel, the pins ensure durability and longevity. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, the turnbuckles offer excellent strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, guaranteeing reliable and high-performance articulation. Uniball Rubber Boots: Designed to protect against dust and water, these rubber boots extend the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coilover Compatibility: The design seamlessly integrates with existing setups, including OEM sway bars and coilovers. Included Components: Two pairs of CNC billet 6082 aluminum front sway bar links turnbuckles Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions With Verkline's Front Sway Bar End Links, automotive enthusiasts can now experience enhanced precision and performance, allowing them to improve their vehicle's handling and suspension for a more controlled and responsive driving experience. These components are thoughtfully designed to seamlessly integrate with OEM sway bars and coilovers, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91

Project Cars

SELECT YOUR BMW

BMW Sway Bar Kits

Sub-Categories

Front Sway Bar Link - E46, Z4

Front Sway Bar Link - E30 E36 E34 E32 E31

Steel Sway Bar Bracket - Single - E39 5-Series

Rear Sway Bar End Links - G20 / G29 / A90 / A91

Front Sway Bar End Links - Toyota Supra A90 / A91

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results