BMW Drive Belts & V-Belts

E36/E46/Z3/Z4 ECS Tuning Aluminum Water Pump Pulley - Black

T#:363707

Part#: 001977ECS03A

In Stock

Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
06-13-2026

$ 99.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 104.99

This product was last offered at the strikethrough price on
06-13-2026

$ 99.74 USD

Add to Wish List

Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the M50/M52/M52TU/M54 engine in the E36, E46, Z3, Z4, and other models. It uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.

Show More Show Less

E9X M3 Performance Underdrive Pulley Kit

T#:593749

Part#: 10.00.011

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - Water Pump/...

T#:18932345

Part#: 6PK1555

Ships on Nov 12, 2026

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Replaces BMW # 11281437929 and 11287636378 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW M50/52...

T#:21670107

Part#: 5PK906

In Stock

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11281437449, 11281437873, and 11281470024 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N55 E Chassis/ N54 E6...

T#:5858460

Part#: 7PK1860

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replaces BMW # 11287628653 and 11287570664 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - Water Pump ...

T#:20979672

Part#: 6PK1460

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Replaces BMW # 11287837898 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - Water Pump ...

T#:22163424

Part#: 4PK685

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Replaces BMW # 11287848606 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Performance Kevlar Reinforced Belt - E82/88 E9X N54

T#:5858455

Part#: 7PK1855

Ships on Nov 12, 2026

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Replaces BMW # 11287628652 and 11287568247 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW S55 3.0...

T#:5858464

Part#: 8PK1398

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Replaces BMW # 11287848605 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N55 F Chassis ...

T#:5858461

Part#: 8PK1390

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - A/C - E46 M...

T#:23416515

Part#: 5PK830

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11287830946 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

E46 M3, Z4M ECS Tuning Aluminum Water Pump Pulley

T#:367060

Part#: 002778ECS01

Ships on Dec 7, 2026

Sale - Save 10% $ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD

Add to Wish List

Qty

Sale - Save 10%

$ 100.99

This product was last offered at the strikethrough price on
06-13-2026

$ 90.89 USD

Add to Wish List

Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the S54 engine in the E46 M3, MZ3, and Z4M. It's the same size and uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.

Show More Show Less

Performance Kevlar Reinforced Belt - N20/N26

T#:5858440

Part#: 6PK1003

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Replaces BMW # 11287618848 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Belt - N52

T#:5858454

Part#: 6PK1990

Back Ordered

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.

ECS Tuning Performance Kevlar Reinforced Accessory Belt - Air Conditi...

T#:3872372

Part#: 6DPK1105

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replaces BMW # 11287841529 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced A/C Belt - BMW E39 E38 E53 E...

T#:23416498

Part#: 5PK1005

In Stock

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11287636376 & 11281435280 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - B58 & B46TU...

T#:5858471

Part#: 6PK1155

Ships on Nov 12, 2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - A/C - BMW ...

T#:21693590

Part#: 5PK863

In Stock

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11281437450 and 11281437872 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Performance Kevlar Reinforced Accessory Belt - E46 E39 E53 E63 E8...

T#:639025

Part#: 6PK1538

Back Ordered

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 4 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW M60 S62...

T#:23416496

Part#: 5PK980

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Replaces BMW # 11287833266 and 11281469256 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - A/C - E46 E...

T#:20979670

Part#: 4PK863

In Stock

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Replaces BMW # 11287512762, 11281437450, and 11281437872 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - M62 & S62 ...

T#:23416495

Part#: 7PK1629

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Replaces BMW # 11287833264 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - A/C - BMW M...

T#:23416514

Part#: 6PK1084

In Stock

Sale - Save 21% $ 28.99

This product was last offered at the strikethrough price on
05-15-2026

$ 23.04 USD

Add to Wish List

Qty

Sale - Save 21%

$ 28.99

This product was last offered at the strikethrough price on
05-15-2026

$ 23.04 USD

Add to Wish List

Replaces BMW # 11287835483 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - M62 4.4L ...

T#:19230362

Part#: 7PK1635

In Stock

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Replaces BMW # 11281432724 & 11287636377 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

T#:553971

Part#: PP.S54

In Stock

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 5 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Rogue Engineering Power Pulley - E46 (Non-M)

T#:554021

Part#: P.E46

Back Ordered

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

Fits the following BMWs:
2000-2006 E46 BMW 323/325/328/330

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW N63 S63...

T#:23416511

Part#: 7PK1647

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Replaces BMW # 11287631824 and 11287565361 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW N47 N57...

T#:23416512

Part#: 6PK1697

Ships on Dec 9, 2026

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Replaces BMW # 11288519128, 11288512067, and 11288507415 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Performance Kevlar Reinforced Belt

T#:639955

Part#: 6PK1715ECS

In Stock

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

ECS Tuning Performance Kevlar Reinforced Accessory Belt - M57 ...

T#:5858472

Part#: 6PK2063

In Stock

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Replaces BMW # 11288477786 and 11287792059 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Performance Kevlar Reinforced Belt

T#:640091

Part#: 6PK895ECS

In Stock

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Upgraded performance drive belt

ECS Tuning Performance Kevlar Reinforced Belt - F97/98 G8X S58 ...

T#:5858467

Part#: 6PK1183

In Stock

Sale - Save 36% $ 36.99

This product was last offered at the strikethrough price on
05-15-2026

$ 23.67 USD

Add to Wish List

Qty

Sale - Save 36%

$ 36.99

This product was last offered at the strikethrough price on
05-15-2026

$ 23.67 USD

Add to Wish List

Replaces BMW # 11288581628 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW E70 E71...

T#:21933046

Part#: 8PK1478

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Replaces BMW # 11287628659 and 11287589365 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

ALTA Crank Pulley - 2% - R52 R53

T#:26238480

Part#: AMPENG520

In Stock at Vendor

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Enhance the performance of your Mini with the ALTA Lightened Crank Pulley (LCP), engineered to increase horsepower and torque. Available in 0% Stock Sized and +2% Oversized options, this pulley is crafted from 6061T6 aluminum, weighing only 0.65 lbs. Significantly lighter than the stock crank pulley, the ALTA LCP ensures improved engine efficiency without adding vibration or noise. The +2% Oversized pulley provides additional boost for Supercharged Cooper S models, delivering safe and reliable performance. With increased belt contact, this pulley reduces wear and enhances durability, making it a must-have upgrade for Mini enthusiasts.

Increases horsepower and torque
Lightweight 6061T6 aluminum construction
Available in 0% Stock Sized and +2% Oversized options
Does not affect charging system
Improves engine efficiency and performance

Show More Show Less

ECS Tuning Performance Kevlar Reinforced A/C Belt - M57

T#:5858473

Part#: 4PK830

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Replaces BMW # 64557793608 ECS Tuning Performance Kevlar-reinforced belts give you that extra peace of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar-reinforced belts have been put through a series of multiple tests: Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Performance Kevlar Reinforced Belt W11 1.6L Engine

T#:639946

Part#: 6PK1388ECS

In Stock

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

ECS Tuning Performance Kevlar reinforced belts offer enhanced durability and reliability for your Mini's engine. These belts are designed with Kevlar reinforcement, providing greater resistance to elongation over time and offering superior shock and impact resistance compared to OEM belts.

Enhanced durability and reliability
Reduced elongation over time, minimizing belt adjustment needs
Higher shock and impact resistance
Rigorously tested for tensile strength, elongation, hardness, temperature, oil resistance, and flex performance

Show More Show Less

Bav Auto Ratcheting Serpentine Belt Wrench Kit

T#:580390

Part#: B8800077

In Stock

Sale - Save 10% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 61.19 USD

Add to Wish List

Used to retract your serpentine belt tensioner. This kit includes 18mm, 5/8 in, 14mm, 13mm, 12mm, sockets and 3/8 in and 1/4 in drive adapters

ALTA Crank Pulley - 0% (Stock Size) MINI W11 1.6L Engine

T#:394899

Part#: AMPENG500

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

ALTA Lightweight Crank Pulley (LCP) for Mini

Upgrade your Mini's performance with the ALTA Lightweight Crank Pulley (LCP), designed to increase horsepower and torque. Available in two sizes - 0% Stock Sized and +2% Oversized - this pulley is engineered for Supercharged Cooper S models. Crafted from 6061T6 aluminum, the ALTA pulley is lightweight, weighing just 0.65 lbs, providing a weight reduction of over 2.3 lbs compared to the stock crank pulley.

Increases horsepower and torque
Lightweight design reduces rotational mass
Does not wear out engine bearings or oil pump
Adds boost safely and reliably
Improves belt contact with pulleys, reducing wear

Show More Show Less

Performance Kevlar Reinforced Belt

T#:639952

Part#: 6PK905ECS

Ships on Nov 12, 2026

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Upgraded performance drive belt

ECS Tuning Performance Kevlar Reinforced Accessory Belt - BMW S85 5.0...

T#:23416513

Part#: 6PK1432

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Replaces BMW # 11287838226 and 11287835482 ECS Tuning Performance Kevlar reinforced belts give you that extra piece of mind! Kevlar reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts. ECS Tuning Performance Kevlar reinforced belts have been put through a series of multiple tests such. Tensile strength Elongation Hardness Temperature and oil resistance per standard JASO E 109-94 Flex testing per SAE J2432.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

T#:553840

Part#: PP.S65.V8.A

Ships in 9 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Bav Auto Serpentine Belt Tensioner Tool Set

T#:580361

Part#: B8800034

In Stock

Sale - Save 3% $ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 30.06 USD

Add to Wish List

This specialty wrench is required to retract the serpentine belt tensioner - necessary in order to remove or install your accessory drive belt. Includes tensioner locking-pin which conveniently holds your tensioner in place while changing belt.

Show More Show Less

Rogue Engineering Racing Power Pulley Set - S54 - E46 M3, Z3/Z4 M ...

T#:553959

Part#: PP.S54.RACE

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less