Find Parts That Fit Your Vehicle

Home
Engine Parts
Gaskets, Gasket Sets, Seals, & O-Rings

BMW Gaskets, Gasket Sets, Seals, & O-Rings

Gaskets are key to a properly running and clean engine. They obviously prevent fluid leaks but they're also critical in keeping air either in or out... Air leaks after the air flow meter, also known as vaccum leaks, can induce lean running conditions, fault codes, and poor running conditions. Other seals and gaskets are designed to keep air in. With the sensitivity of OBD systems, leaks will lead to fault codes very quickly which can be tough to diagnose and prevent you from passing state inspections.

We insist on Original BMW or OEM gaskets whenever possible.

Sub-Categories

Sort By:

NRW Designs S65 Valve Cover Gasket Kit

T#:42436691

Part#: S65VCGKT

In Stock

$ 396.00 USD

Add to Wish List

Qty

$ 396.00 USD

Add to Wish List

Whether you're maintaining your S65 engine or upgrading to billet covers, the NRW Designs S65 Valve Cover Gasket Kit ensures maximum reliability and performance

NRW Designs - Upgraded S65 Viton Valve Cover Gasket Set - E90, E92 M3...

T#:42436697

Part#: S65VCG12

Ships in 3 Business Days

$ 114.99

This product was last offered at the strikethrough price on
07-31-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A smart upgrade that enhances engine reliability and longevity by sealing off the valve cover and mitigating oil leaks.

NRW Designs Silicone Valve Cover Grommet Kit - S65 E9x M3

T#:26504975

Part#: S65VCG

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

From the factory, BMW S65 valve cover bolts feature integrated non-serviceable grommets. These rubber seals tend to weaken, becoming brittle after years of heat and oil exposure. Replacing these bolts and integrated grommets can total over $280

To address this issue, NRW has developed a solution: a silicone replica of the factory rubber grommet, boasting a superior heat resistance of 170 degrees Celsius compared to the original's 120 degrees Celsius. Each kit contains 26 grommets, enough to service both valve covers.

Show More Show Less

NRW Design Billet Spark Plug Tubes - S65 E9X M3

T#:29101660

Part#: S65BILLETSPTBS

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Crafted from 6061 billet aluminum, these spark plug tubes are the first of their kind. They boast a serviceable design and a 30% increase in contact surface compared to OEM spark plug tubes, ensuring superior performance and durability. Designed to last a lifetime, these billet spark plug tubes are resistant to leaks, tears, and deterioration.

Show More Show Less

Oil Pan Gasket

T#:26305093

Part#: 11137548031

In Stock

Sale - Save 20% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.59 USD

Add to Wish List

NRW Designs The Ultimate BMW Billet Oil Cap - S55, S65, S85

T#:42436711

Part#: UBBOC

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

The reliable and stylish choice for performance-minded owners. Upgrade your BMW’s form and function with NRW Designs The Ultimate BMW Billet Oil Cap

NRW Designs S85 Valve Cover Grommet Kit

T#:29101664

Part#: S85VCG

Ships in 3 Business Days

$ 124.00 USD

Add to Wish List

Qty

$ 124.00 USD

Add to Wish List

Say goodbye to costly valve cover grommet replacement with this innovative solution from NRW Design. From the factory, the S85 was equipped with integrated, non-serviceable grommets. After years of exposure to scalding engine oil, these rubber grommets become brittle and fail to seal properly. Replacing these grommets can prove costly, with OEM bolt and seal assemblies totaling over $270 for a complete set! Thankfully, NRW created this kit to solve this issue and improve upon the factory design. Features: High Heat Resistance: Silicone grommets withstand temperatures up to 170°C, outperforming factory rubber grommets (120°C). Long-lasting Durability: Engineered to withstand years of heat and oil exposure, ensuring a reliable seal. Cost-effective Solution: Avoid expensive OEM bolt replacements with our affordable kit. Complete Coverage: Each kit includes 34 grommets, providing comprehensive coverage for both valve covers. Easy Installation: Simplify the valve cover gasket replacement process with NRW's user-friendly kit. If you're tackling a valve cover gasket overhaul on your S85, be sure to choose NRW's grommet kit to ensure longevity and prevent leaks for years to come!

Show More Show Less

BMW S58 5.0L VANOS Solenoid O Ring Kit

T#:557353

Part#: 11367841072OKT

Ships in 6 Business Days

Sale - Save 26% $ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 71.40 USD

Add to Wish List

Qty

Sale - Save 26%

$ 95.99

This product was last offered at the strikethrough price on
06-14-2026

$ 71.40 USD

Add to Wish List

Upgrade your BMW S58 5.0L engine with the BMW S58 5.0L VANOS Solenoid O Ring Kit. This high-quality kit includes replacement O rings for the VANOS solenoids, ensuring proper sealing and preventing oil leaks. With easy installation and durable materials, this kit is essential for maintaining optimal performance and reliability of your BMW S58 engine.

Includes replacement O rings for VANOS solenoids
Ensures proper sealing and prevents oil leaks
Easy installation process
Durable materials for long-lasting performance

Show More Show Less

Cometic Multi-layer Steel Head Gasket - B58

T#:25241786

Part#: COM-HG-B58G1

In Stock

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Constructed with multiple layers of stainless steel and a proprietary coating, the MLX gasket offers superior sealing and load distribution capabilities. The coating is designed to withstand high temperatures and pressures, preventing gasket failure due to fatigue or stress. Additionally, the unique embossed sealing bead provides further sealing ability.

Show More Show Less

Athena Cut Ring Head Gasket S63/N63

T#:26238393

Part#: ATH-HG-CR-S63-90

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

5150 AutoSport Pro-Series Turbo Build Kit - BMW N55 Stage 2

T#:31755188

Part#: 5150-TBK-N55-100

Ships in 3 Business Days

$ 6,099.99 USD

Add to Wish List

Qty

$ 6,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

BMW M50 M52 S50 S52 Cut Ring Head Gasket

T#:45176130

Part#: ATH-CR330014

Back Ordered

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Timing Component

T#:17871151

Part#: 11117547842

In Stock

Sale - Save 20% $ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 17.59 USD

Add to Wish List

Shaft Seal

T#:19792189

Part#: 11117568264

In Stock

Sale - Save 20% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.19 USD

Add to Wish List

Located between the crankshaft and harmonic balancer. Also known as the front main seal or crankshaft seal.

Shaft Seal - R55, R56, R57, R58, R59, R60, R61

T#:22690761

Part#: 11117568263

In Stock

Sale - Save 20% $ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 19.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.99 USD

Add to Wish List

Rear main seal, located between the crankshaft and the flywheel.

Crankshaft Seal - Front

T#:17871152

Part#: 11141275466

In Stock

Sale - Save 15% $ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.64 USD

Add to Wish List

Qty

Sale - Save 15%

$ 8.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.64 USD

Add to Wish List

1.5mm X 51mm Metric Buna-N 70 O-ring

T#:388889

Part#: N1.50X051

In Stock

Sale - Save 25% $ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 5.99

This product was last offered at the strikethrough price on
06-13-2026

$ 4.49 USD

Add to Wish List

1.5mm X 51mm Metric Buna-N 70 O-ring is the perfect sealing solution for various industrial applications. Made from high-quality Buna-N material, this O-ring provides reliable sealing performance, ensuring leak-free connections. With its metric sizing and 70 durometer hardness, it offers versatility and durability for a wide range of uses.

High-quality Buna-N material
Reliable sealing performance
Metric sizing for versatility
70 durometer hardness for durability

Show More Show Less

BMW S54 3.2L O-Ring - Priced Each

T#:28570864

Part#: 13417830384

In Stock

Sale - Save 25% $ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Ensure optimal engine performance with the BMW S54 3.2L O-Ring.

Specifically designed for BMW engines, this o-ring provides a reliable seal to prevent leaks and maintain engine integrity. Crafted with high-quality materials, it withstands high temperatures and pressures, ensuring long-lasting durability. With easy installation and precise fitment, this o-ring is essential for any BMW owner looking to maintain their engine's performance and reliability.

Provides a reliable seal to prevent leaks
Withstands high temperatures and pressures
Ensures long-lasting durability
Easy installation for convenience
Precise fitment for BMW engines

Show More Show Less

BMW E39 M5 S62 5.0L O-Ring - Priced Each

T#:554550

Part#: 11531407002

In Stock

Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 5.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 5.24 USD

Add to Wish List

Enhance your BMW's engine reliability with the BMW E39 M5 S62 5.0L O-Ring.

Engineered for precision and durability, this o-ring ensures a tight seal to prevent leaks and maintain optimal performance. Crafted specifically for the BMW E39 M5 S62 5.0L engine, it withstands high temperatures and pressures, providing long-lasting reliability. With easy installation and a perfect fit, this o-ring is essential for any BMW owner looking to keep their engine running smoothly.

Ensures a tight seal to prevent leaks
Withstands high temperatures and pressures
Provides long-lasting reliability
Easy installation for convenience
Perfect fit for BMW E39 M5 S62 5.0L engine

Show More Show Less

O-Ring - Priced Each

T#:554449

Part#: 11361403325

In Stock

Sale - Save 25% $ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 2.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.24 USD

Add to Wish List

Cylinder Head Gasket

T#:7196685

Part#: 11128630684

Back Ordered

$ 221.99

This product was last offered at the strikethrough price on
05-08-2026

$ 214.99 USD

Add to Wish List

Qty

$ 214.99 USD

Add to Wish List

Select Vehicle

Purpose

Category

Gaskets, Gasket Sets, Seals, & O-Rings

Brand

Price

Special Offers

On Sale (10)

Shipping