Find Parts That Fit Your Vehicle

Home
Drivetrain

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

IRP BMW Short Shifter Dust Boot - For IRP V2, V3 & V3 CS Short Shifte...

T#:569037

Part#: IRPSS-DB

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Developed specifically for the IRP V2, V3, and V3 CS Short shifters, this Dust Boot mounts to the short shifters base to keep out dirt and noise that would normally come through the otherwise unprotected opening in your center console.

Show More Show Less

Differential - mount bushing

T#:26938502

Part#: KDT919

Ships in 4 Business Days

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

After thorough development and material testing aimed at achieving strength, durability, geometry retention, and memory without compromising comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This groundbreaking material combines the advantages of solid bushings with the flexibility characteristics of rubber, striking an optimal balance between performance and comfort.

Show More Show Less

Billet Large Capacity BMW DCT Transmission Pan

T#:19593973

Part#: VTT-DCT-PAN

Ships in 10 Business Days

Starting at $ 523.99 USD

Add to Wish List

Starting at $ 523.99 USD

Add to Wish List

Product Features: Billet construction using 6061-T6 aluminum for long life, and added strength 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML Machined fins for improved cooling Rare Erath magnet built in to pull metal from the fluid US-Made Viton Gasket -6 ORB drain plug for easy service VTT is Proud to offer the Billet Aluminum DCT Transmission pan. This pan is an upgrade from the factory equipped plastic pan, to a 6061-T6 aluminum anodized pan in a variety of colors. This DCT pan increases fluid capacity by 80%, almost DOUBLE the stock pan. This pan utilizes a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug.

Show More Show Less

Short Shift Kit

T#:31423729

Part#: 1221982020

Ships in 6 Business Days

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

IRP E46 V2/V3 Short Shifter Mounting Plate - BMW E46 3-Series (Manual...

T#:4469704

Part#: IRPSS46-MB

Ships on Oct 19, 2026

$ 110.99

This product was last offered at the strikethrough price on
05-27-2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Already own an IRP V2 or V3 short shifter but want a cleaner installation? This E46 Mounting plate can transform your universal-style short shifter into a direct-fit bolt-on shifter specifically for your E46! CNC milled and Anodized coated, this shifter plate is designed to allow your shifter to be upgraded to a Plug & Play style, utilizing the factory shifter mounting points for a simple and reliable install. NOTE: Does not fit BMW V3 Self Centering short shifters, only standard V2 and V3 shifters.

Show More Show Less

Whiteline Rear Differential Bushing - E36

T#:26671635

Part#: W92623

In Stock at Vendor

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

The subframe serves as the mounting point for your rear suspension system. It connects to the body using bushings designed to absorb vibrations at all attachment points. These bushings play a crucial role in dampening vibrations that could otherwise be transmitted to the cabin, ensuring the subframe remains stable. Additionally, they provide a secure mounting surface, maintaining tightness throughout the assembly. If you notice excessive vibration inside your cabin or hear clunking or knocking sounds when driving over bumps, the issue may be related to your subframe bushings.

Show More Show Less

Differential And LSD Tune

T#:34382136

Part#: BM237HAKT

Ships in 2 Business Days

$ 2,100.00 USD

Add to Wish List

Qty

$ 2,100.00 USD

Add to Wish List

Upgrade to a better performing LSD, includes tune.

Differential Mount Bushing Kit BMW 5 Series F10

T#:45176100

Part#: KDT990

Ships in 1 Business Day

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

F9X X3/4M Billet Diff Lock Down Kit

T#:26404860

Part#: VTT-F9X-LDK

Back Ordered

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

T#:2423579

Part#: IRPEM-9XAL

Special Order: No Guaranteed ETA

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

Billet Diff Lock Down Kit

T#:21176906

Part#: VTT-A9X-DLD

In Stock

Sale - Save 7% $ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

Sale - Save 7%

$ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. Vargas went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced. You will need a Riv-nut tool to install the Riv-nuts as one is not included. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

Quick Shift Kit 122 19 56 030 for B46 B48 2.0L

T#:26238484

Part#: 1221956030

In Stock

$ 145.00 USD

Add to Wish List

Qty

$ 145.00 USD

Add to Wish List

Enhance the shifting experience of your Mini Cooper S Gen 3 with this quick shift kit. Crafted with precision CNC machining from billet aluminum, this kit reduces shift travel by approximately 40%, providing smoother and quicker gear changes. With its large adjustment range, drivers can customize the shift lever travel to suit their driving preferences. Adjustment can be easily done from inside the car using a 16 mm wrench. The kit includes a convenient removal tool to assist in removing the OEM shifter.

Precision CNC machined from billet aluminum
Reduces shift travel by approximately 40%
Large adjustment range for personalized shift lever travel
Easy adjustment from inside the car
Includes removal tool for OEM shifter

Show More Show Less

Short Shifter BMW V3 Self Centring - Black With Blue Button

T#:44461480

Part#: IRPSS-SC-3BB

Special Order: No Guaranteed ETA

$ 466.99 USD

Add to Wish List

Qty

$ 466.99 USD

Add to Wish List

For BMW owners looking to elevate their driving experience, the IRP Short Shifter BMW V3 Self Centering - Black With Blue Button from Turner Motorsport is the ultimate choice, combining performance, style, and reliability in one premium package.

Show More Show Less

Select Vehicle

Purpose

Category

Home

Drivetrain

Brand

View All Brands

Price

Special Offers

On Sale (1)

Shipping