Find Parts That Fit Your Vehicle

Home
Drivetrain

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Billet Large Capacity BMW DCT Transmission Pan

T#:19593973

Part#: VTT-DCT-PAN

Ships in 10 Business Days

Starting at $ 523.99 USD

Add to Wish List

Starting at $ 523.99 USD

Add to Wish List

Product Features: Billet construction using 6061-T6 aluminum for long life, and added strength 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML Machined fins for improved cooling Rare Erath magnet built in to pull metal from the fluid US-Made Viton Gasket -6 ORB drain plug for easy service VTT is Proud to offer the Billet Aluminum DCT Transmission pan. This pan is an upgrade from the factory equipped plastic pan, to a 6061-T6 aluminum anodized pan in a variety of colors. This DCT pan increases fluid capacity by 80%, almost DOUBLE the stock pan. This pan utilizes a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Shifter Carrier Bushings

For Manual Transmission Vehicles Only

T#:597390

Part#: E46E9XZHPSCB

Ships in 1 Business Day

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

Solid Delrin oval shift carrier bushings for your 6 speed 330i & 330ci. Get rid of that annoying side to side sloppy play in your shifter. Replace both original flimsy rubber bushings at the front of the aluminum carrier with the shift carrier kit from Condor Speed Shop. You will receive 2 bushings with this kit.

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

T#:577565

Part#: S14M

Ships in 1 Business Day

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Autotecknic Carbon Fiber Gear Selector Trim - G05 X5/G06 X6/G07 X7 ...

T#:5189134

Part#: ATK-BM-0110

Ships in 7 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed gear selector trim for the G05 X5, G06 X6, and G07 X7 composed of 3k twill weave carbon fiber. Includes guide for installation. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Rogue Engineering Rear Carrier Bushing Mount - G8X M3 M4

T#:18766684

Part#: RE.RCBM

Ships in 8 Business Days

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the G8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...

T#:577575

Part#: PLYE10TRANS

Ships in 2 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & ...

T#:48401514

Part#: RE.RCBM-F8X

Ships on Sep 8, 2026

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Sachs Performance BMW Z4M Power Clutch Kit

2X Entries For Our G87 M2 Sweepstakes!

T#:15710797

Part#: 001243.999515G

Ships in 5 Business Days

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

Performance Clutch Kit for use with factory flywheel, capable of handling up to 400 ft lbs of torque with OE clutch feel

F9X X3/4M Billet Diff Lock Down Kit

T#:26404860

Part#: VTT-F9X-LDK

Back Ordered

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

Rogue Engineering - OCTANE Short Shift Kit

T#:36100144

Part#: OCT.E9X.M3.

Back Ordered

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Billet Diff Lock Down Kit

T#:21176906

Part#: VTT-A9X-DLD

In Stock

Sale - Save 7% $ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

Sale - Save 7%

$ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. Vargas went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced. You will need a Riv-nut tool to install the Riv-nuts as one is not included. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

AutoTecknic Dry Carbon Battle Version Shift Paddles - Red Indicators,...

T#:39059234

Part#: BM-0264-DCG-R

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Upgrade your BMW G05 X5, G06 X6, or G07 X7 with the AutoTecknic Dry Carbon Battle Version Shift Paddles from Turner Motorsport and enjoy a refined, high-performance driving experience.

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

T#:577943

Part#: E36HS

Ships in 4 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.

Show More Show Less

AutoTecknic Dry Carbon Battle Version Shift Paddles (White Indicator...

T#:39059237

Part#: BM-0264-DCG-W

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

We understand all car enthusiasts' goals—to go as fast as possible while maintaining safety and a comfortable position in the pilot’s seat at the same time. When it comes to piloting a vehicle, the driver is at optimum control when they become one with the car. These paddle shifters are offered in a gloss finish with White Indicators.

Show More Show Less

AutoTecknic Dry Carbon Battle Version Shift Paddles - A90 Toyota Supr...

T#:39599352

Part#: TO-0264-DCG-R

Ships in 7 Business Days

$ 394.99 USD

Add to Wish List

Qty

$ 394.99 USD

Add to Wish List

Elevate your Toyota Supra A90’s interior with the AutoTecknic Dry Carbon Battle Version Shift Paddles, and experience a superior driving experience with enhanced performance and bold style.

AutoTecknic Dry Carbon Battle Version Shift Paddles - White Indicator...

T#:39599355

Part#: TO-0264-DCG-W

Ships in 7 Business Days

$ 394.99 USD

Add to Wish List

Qty

$ 394.99 USD

Add to Wish List

Upgrade the driving experience and interior aesthetics of your A90 Toyota Supra with the AutoTecknic Dry Carbon Battle Version Shift Paddles, engineered for precision, style, and performance.

AutoTecknic Competition Shift Paddles - Steel Grey - A90 Supra ...

T#:39599358

Part#: TO-0264-SG

Ships in 7 Business Days

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Upgrade your A90 Supra with the AutoTecknic Competition Shift Paddles and enjoy the perfect blend of style, performance, and driving precision.

AutoTecknic Competition Shift Paddles - Silver Alloy - A90 Supra ...

T#:39599356

Part#: TO-0264-SA

Ships in 7 Business Days

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Upgrade the look and feel of your A90 Supra with AutoTecknic Competition Shift Paddles, engineered for precision shifting and an unparalleled driving experience.

AutoTecknic Competition Shift Paddles - Stealth Black - A90 Supra ...

T#:39599357

Part#: TO-0264-SB

Ships in 7 Business Days

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Upgrade your A90 Supra with AutoTecknic Competition Shift Paddles finished in Stealth Black and experience the perfect blend of style, performance, and control.

Rogue Engineering E46 M3 Differential Bushing (Front Position) FIX ...

T#:54388516

Part#: RE.484.FIX

Ships in 8 Business Days

$ 64.00 USD

Add to Wish List

Qty

$ 64.00 USD

Add to Wish List

A common failure point on the BMW E46 M3 platform occurs when the side differential mounting bolt backs out, leading to stripped threads in the differential cover.

Select Vehicle

Purpose

Category

Home

Drivetrain

Brand

View All Brands

Price

Special Offers

Shipping