BMW Drivetrain Parts

BMS Billet Clutch Delay Valve (CDV) Delete - E8X/E9X

T#:2513299

Part#: BMWCLUTCHVAVLE

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

Replaces factory clutch delay valve for improved performance
Quicker shifts and improved 0-60 times
Longer clutch life
Easy installation with factory-like connections
Made in the USA

Show More Show Less

IRP BMW Short Shifter Dust Boot - For IRP V2, V3 & V3 CS Short Shifte...

T#:569037

Part#: IRPSS-DB

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Developed specifically for the IRP V2, V3, and V3 CS Short shifters, this Dust Boot mounts to the short shifters base to keep out dirt and noise that would normally come through the otherwise unprotected opening in your center console.

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - 335 W/Thermostat ...

T#:21045476

Part#: BMS-335-TC-WTH

Back Ordered

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

BMS Differential Support Bracket Brace For G Chassis BMW/Supra ...

T#:49822560

Part#: BMSDSBBG

Ships on Aug 28, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

For G-Chassis BMW & A90/A91 Toyota Supra High torque loads, hard launches, and aggressive driving expose the factory differential mounting’s built-in compliance. Under power, the differential can shift excessively, resulting in wheel hop, inconsistent traction, and increased stress on drivetrain components—issues that become more pronounced on tuned or track-driven cars. The BMS Differential Support Bracket Brace corrects this weakness by reinforcing the differential mounting point and securely tying it to the subframe. By controlling unwanted movement, the brace improves rear-end stability and ensures power is transferred to the ground more efficiently. Why Upgrade? OEM differential mounts favor NVH reduction over control. As torque output increases, that compliance translates into drivetrain shock and lost traction. This brace stiffens the system where it matters most, reducing flex and improving load management under acceleration. Performance Benefits Improved launch consistency Significant reduction in wheel hop Increased rear-end stability under load More precise and predictable power delivery Engineered for Demanding Use Designed around factory mounting points, the BMS Differential Support Bracket delivers precise OE-level fitment with increased structural rigidity. Its robust construction resists deflection under high torque, while upgraded hardware provides greater clamping force for long-term reliability. Fully bolt-on for straightforward installation on both stock and modified vehicles. Key Features Reinforces rear differential mounting Limits differential movement under load Enhances traction and drivetrain response Heavy-duty construction for high-performance applications Bolt-on installation using factory locations Compatible with G-chassis BMW and A90/A91 Supra A focused drivetrain upgrade for drivers who demand consistency, control, and durability at higher performance levels.

Show More Show Less

IRP E46 V2/V3 Short Shifter Mounting Plate - BMW E46 3-Series (Manual...

T#:4469704

Part#: IRPSS46-MB

Ships on Oct 19, 2026

$ 110.99

This product was last offered at the strikethrough price on
05-27-2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Already own an IRP V2 or V3 short shifter but want a cleaner installation? This E46 Mounting plate can transform your universal-style short shifter into a direct-fit bolt-on shifter specifically for your E46! CNC milled and Anodized coated, this shifter plate is designed to allow your shifter to be upgraded to a Plug & Play style, utilizing the factory shifter mounting points for a simple and reliable install. NOTE: Does not fit BMW V3 Self Centering short shifters, only standard V2 and V3 shifters.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 3 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E30 5-Speed

For vehicles with 5-speed transmissions

T#:7624623

Part#: 116149

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - E82/88 135

T#:19461751

Part#: BMSTRANSCOOLER

Special Order: No Guaranteed ETA

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

Shifter Carrier Bushings

For Manual Transmission Vehicles Only

T#:597390

Part#: E46E9XZHPSCB

Ships in 1 Business Day

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

Solid Delrin oval shift carrier bushings for your 6 speed 330i & 330ci. Get rid of that annoying side to side sloppy play in your shifter. Replace both original flimsy rubber bushings at the front of the aluminum carrier with the shift carrier kit from Condor Speed Shop. You will receive 2 bushings with this kit.

Show More Show Less

AAF Race Shifter W/Adjustable Shift Shaft - E46 6-Speed

For vehicles with 6-speed transmissions

T#:7624620

Part#: 116147-6

Ships in 4 Business Days

$ 1,244.99 USD

Add to Wish List

Qty

$ 1,244.99 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

T#:577565

Part#: S14M

Ships in 1 Business Day

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...

T#:577575

Part#: PLYE10TRANS

Ships in 3 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

T#:2423579

Part#: IRPEM-9XAL

Special Order: No Guaranteed ETA

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...

T#:14915970

Part#: FG1B58TOC

Back Ordered

7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Qty

7% off MSRP

$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.

Show More Show Less

Adjustable Clutch Stop

T#:8677175

Part#: JBCLUTCH

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Enhance your BMW's shifting experience with the BMS Short Throw Clutch Stop. This adjustable clutch stop eliminates the dead space between your clutch pedal and the floor, enabling faster and smoother shifts. Designed to snap into place similar to your OEM clutch stop, it ensures seamless installation and full reversibility. Unlike other stops, this clutch stop includes rubberized adjustment shims, preventing rattling issues commonly seen with metal washers. Enjoy quick and effortless installation or removal, taking only minutes to complete. Compatible with manual transmissions.

Show More Show Less

Quaife Torque Biasing Differential for Cooper S - (NO LONGER AVAILABL...

T#:7

Part#: TMS7

Ships in 4 Business Days

$ 1,732.99 USD

Add to Wish List

Qty

$ 1,732.99 USD

Add to Wish List

The Quaife torque biasing differential enables your car to accelerate quicker and corner faster. How? By getting the power to the ground! The Quaife Differential powers both drive wheels under nearly all conditions, instead of just one. With an ordinary open differential, standard on all MINI's, a lot of precious power is wasted during wheelspin under acceleration. This happens because the open differential shifts power to the wheel with less grip (along the path of least resistance). The Quaife, however, does just the opposite. It senses which wheel has the better grip, and biases the power to that wheel. It does this smoothly and constantly, and without ever completely removing power from the other wheel.

Show More Show Less

AAF Race Shifter W/Adjustable Shift Shaft - E36 6-Speed

For vehicles with 6-speed transmissions

T#:7624621

Part#: 116148-6

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E36 5-Speed

For vehicles with 5-speed transmissions

T#:7624622

Part#: 116148

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - 135 W/Thermostat ...

T#:21045475

Part#: BMS-135-TC-WTH

Ships on Aug 28, 2026

$ 573.00 USD

Add to Wish List

Qty

$ 573.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2008-2013 E81 E82 E87 Coupe and Hatchback 135i 2008-2013 E88 Convertible 135i Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 6-Speed

For vehicles with 6-speed transmissions

T#:7624628

Part#: 116149.1-6

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Race Shifter W/Adjustable Shift Shaft - E30 6-Speed

For vehicles with 6-speed transmissions

T#:7624624

Part#: 116149-6

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

T#:577943

Part#: E36HS

Ships in 5 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.

Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 5-Speed

For vehicles with 5-speed transmissions

T#:7624627

Part#: 116149.1

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E46 5-Speed

For vehicles with 5-speed transmissions

T#:7608883

Part#: 116147

Ships in 4 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

Race-Spec Dual-Clutch Transmission Oil Cooler - F8X M3 M4

T#:25971912

Part#: VF-DCTCOOLERF8X

Ships on Aug 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

This heat exchanger features a dual-pass high-performance core that offers 30% more efficiency than its factory counterpart. This kit will keep your transmission fluid cool no matter the outside temperature!

Show More Show Less

AAF ZF Transmission Swap Kit - 5.5" Bearing - BMW E30

T#:52129730

Part#: E30ZFTSK55

Ships in 4 Business Days

$ 1,198.00 USD

Add to Wish List

Qty

$ 1,198.00 USD

Add to Wish List

Upgrade your E30’s drivetrain with the AAF ZF Transmission Swap Kit, a turnkey solution for those demanding more reliability and smoother gear engagement.

Short Shifter BMW V3 Self Centring - Black With Blue Button

T#:44461480

Part#: IRPSS-SC-3BB

Special Order: No Guaranteed ETA

$ 466.99 USD

Add to Wish List

Qty

$ 466.99 USD

Add to Wish List

For BMW owners looking to elevate their driving experience, the IRP Short Shifter BMW V3 Self Centering - Black With Blue Button from Turner Motorsport is the ultimate choice, combining performance, style, and reliability in one premium package.

Show More Show Less