AFE BMW Catback Exhaust Systems

The MACH Force XP exhaust system for the BMW 325i/ci 330i/ci E46 produced 13 horsepower and 15 lbs. x ft. of torque. This exhaust system is constructed from 2.25” mandrel bent 409 stainless steel and is MIG-welded for high strength. The system uses a true dual in and dual out high flow muffler with 2.25” tubing which improves performance across the entire power band while maintaining a great tone. To finish off this exhaust are dual, double wall resonated angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. 

Hassle-Free Installation: All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal: High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound: A free-flowing, true dual muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

OEM BMW Gaskets: This system uses two OEM BMW gaskets to provide a flawless seal without sacrificing quality.

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

This part fits the following BMWs:
1998 - 2001 E46 325i 325ci 330i 330ci 

The MACH Force XP exhaust system for the 2011-2015 BMW 535i N55 produced 9 horsepower and 7 lbs. x ft. of torque. This exhaust system is constructed from 2.50” mandrel bent 304 stainless steel, TIG-welded and has a hand brushed finish. The system begins with a 3.50” inlet off of the down pipe and merges into dual 2.50” tubing which improves performance across the power band while maintaining a great tone. Countless hours of R&D was used to ensure the perfect decibal level without compromising performance. To finish off this exhaust are two adjustable rolled double wall angle cut 3.5"OD 304 stainless steel tips which you can move forward or rearward depending on personal preference. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary. 

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Fits the following BMWs:
2011-2015 F10 BMW 535i N55

The aFe MACH Force-Xp cat-back exhaust system for the BMW N55 delivers uncompromising quality and performance.  3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers optimum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note at all throttle inputs. The system utilizes the factory valve motor and factory performance modes. Closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust bypasses the muffler to unleash the full performance potential and aggressive note from your N55. Large 4" diameter polished stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

DETAILS:

• +12 HP and +10 lbs. x ft. Torque max gains
• 3" - 2-1/2" mandrel bent, 304 stainless steel for maximum flow
• High flow, transverse muffler with a high-temp powder-coated black finish
• Dual 4" diameter polished stainless steel exhaust tips
• Includes factory style exhaust valve (using factory motor, not included)
• Optional resonator delete pipe is available PN 49-36622
• 100% hand TIG-welded for strength and durability

Performance Gains:
Data coming soon!

304 Stainless Steel Construction:
3" into 2-1/2" mandrel bent 304 stainless steel tubing for maximum performance, corrosion resistance, durability and overall breath-taking appearance.

High-Flow Performance Muffler:
Featuring a corrosion resistant high temp. metallic black powder-coat this high flow, transverse stainless steel muffler improves sound and performance gains across the power band.

Dual 4" Polished Tips:
Finishing off this system are dual 4" diameter, polished stainless steel exhaust tips. The tips come with a laser-etched aFe power logo for a custom, stylish finish.

Exhaust Valve:
Incorporated is a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position and factory performance mode for maximum performance.

Resonator Delete Pipe:
An optional resonator delete pipe is compatible with this exhaust system (not included, sold separately) aFe part number: 49-36622 (No cutting or fabrication required).

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Hassle-Free Installation:
This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware is included for a hassle-free installation.

Note:
Will NOT fit xDrive (AWD) Models.

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Add power, sound and unique style to your BMW X5/X6 M with this aFe Power cat-back system which produced gains of up to +15 horsepower and +23 lbs. x ft. torque as measured on our in-house dyno. Dual 3" to 2-1/2" mandrel-bent, TIG welded, brush finished 304 stainless steel tubing keeps exhaust flowing smoothly for power gains you can feel. The factory exhaust valve motor is used to regulate the exhaust flow from a closed-valve, aggressive tone to wide-open, competition sound. True quad, 3 1/2" black stainless steel exhaust tips with laser etched aFe Power logo for a custom finish.

DETAILS:

• In-house dyno testing produced gains of up to +15 horsepower and +23 lbs. x ft. torque
• 3" - dual 2-1/2" mandrel bent, brush finished 304 stainless steel tubing outflows and outlasts factory exhaust
• True quad 3 1/2" diameter black stainless steel exhaust tips with laser-etched aFe Power logo
• 100% CAD designed for a custom, high tolerance factory fitment
• Muffler deleted design and integrated mitered merge evenly distributes exhaust pulses
• Includes extension leads for exhaust valve motor relocation

Performance Gains:
In-house dyno testing produced gains of up to +15 horsepower and +23 lbs. x ft. torque

Brush finished 304 Stainless Steel Construction:
This exhaust system is constructed of 3" - dual 2-1/2" mandrel-bent, brush finished 304 stainless steel tubing for maximum flow, corrosion resistance and quality finish.

True Quad 3 1/2" Black Stainless Steel Exhaust Tips:
Finishing off this system are quad 3 1/2" diameter black stainless steel exhaust tips. Laser-etched with aFe Power logo for a custom, stylish finish.

Flow and Performance:
This cat-back system features a muffler-deleted design and Integrated mitered merge to evenly distributes exhaust pulses for an aggressive to track-style exhaust tone.

Simple, Hassle Free Installation:
This system has been 100% CAD designed to factory tolerances for a direct bolt-on fitment with no cutting or modifications required. Quality stainless steel hardware and valve extensions included for a hassle-free installation.

TIG-Welded:
100% TIG-welded for race proven strength and durability.

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

aFe POWER exhaust systems are engineered and manufactured in our Corona, California

This system is constructed of 2.50" diameter, mandrel bent, TIG-welded, 304 stainless steel, brushed finish tubing and uses all factory mounting locations for an approximate 1 hour install time. In recent testing, this exhaust system produced 12 horsepower and 11 lbs. x ft. of torque. This unique system utilizes 3.5" diameter 304 polished laser etched quad tips that fit perfectly in your stock bumper cutouts.

304 Stainless Steel:
This unique exhaust system uses 2.5" diameter 304 Stainless Steel that is TIG-welded and has a hand brushed finish.

304 Stainless Steel Polished Quad Tips:
3.5" diameter polished tips are used for and aggressive yet sporty look.

Dual Mufflers:
The dual mufflers consist of a single in, dual out, free flowing design, giving an aggressive sound at high RPM's, yet maintaining a subtle tone at cruising speeds.

Uses OE Mounting Locations:
This system uses factory mounting locations providing stability and hassle-free installation with no modifications necessary.

Does not require CARB certification

High flow exhaust system directly from aFe, one of the top after market performance manufacturers. This new MACH Force XP exhaust system is for the 2016+ BMW 340i F30 with the new N58 3.0L turbo engine. In recent testing this system produced 14 horsepower and 13 lbs. x ft. of torque. This exhaust system is constructed from 3.0” mandrel bent stainless steel and is hand TIG-welded. The system uses a high flow transverse muffler with 3" diameter tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall resonated angle cut polished 304 stainless steel tips. The factory actuator drive is retained with the aFe exhaust so that a check engine light does not occur. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.

Simple Installation:
All systems use factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• +14 HP and +13 lbs. x ft. Torque max gains
• Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubing
• Includes a factory style exhaust valve
• Utilizes a unique high flow, transverse muffler with a high-temp powder-coated black finish
• Includes dual 4" diameter, polished 304 stainless steel tips
• Factory style V-band flange for a secure leak-free seal
• Uses all factory hanger locations for a hassle-free installation

Fits the Following BMW's:
2016+ F30 BMW 340i B58

This system is constructed of 2.50" diameter, mandrel bent, TIG-welded, 304 stainless steel, brushed finish tubing and uses all factory mounting locations for an approximate 1 hour install time. In recent testing, this exhaust system produced 12 horsepower and 11 lbs. x ft. of torque. This unique system utilizes 3.5" diameter 304 polished laser etched quad tips that fit perfectly in your stock bumper cutouts.

304 Stainless Steel:
This unique exhaust system uses 2.5" diameter 304 stainless steel that is TIG-welded and has a hand brushed finish.

304 Stainless Steel Polished Quad Tips:
3.5" diameter polished tips are used for and aggressive yet sporty look.

Dual Mufflers:
The dual mufflers consist of a single in, dual out, free flowing design, giving an agressive sound at high RPM's, yet maintaining a suttle tone at cruising speeds.

Uses OE Mounting Locations:
This system uses factory mounting locations providing stability and hassle-free installation with no modifications neccessary.

Legality:
This part does not require a CARB EO#

The Mach Force XP cat-back exhaust system produces 11hp and 10lbs. x ft. of torque for your BMW 335i. This exhaust systems is constructed from 2.75" mandrel bent, 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. The system also comes with dual 3.5" polished 304 stainless steel tips and muffler to build a mellow, yet powerful sound. Note: Cutting is required and should be performed by a skilled technician.

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Leak-Free Seal:
High quality band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing mufflers is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Crossover Balance Tube:
The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance, it also reduces sound decibels ultimately minimizing exhaust drone.

This part fits the following BMWs:
2007-2010 E9X 335i

The aFe MACH Force-Xp cat-back exhaust system for the BMW N55 exceeds your quality and performance expectations.  3"- 2-1/2" mandrel bent 304 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash the sound and performance of your N55. Large 4" diameter gloss black stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

DETAILS:

• +12 HP and +10 lbs. x ft. Torque max gains
• 3" - 2-1/2" mandrel bent, 304 stainless steel for maximum flow
• High flow, transverse muffler with a high-temp powder-coated black finish
• Dual 4" diameter gloss black stainless steel exhaust tips
• Includes factory style exhaust valve (using factory motor, not included)
• Optional resonator delete pipe is available PN 49-36622
• 100% hand TIG-welded for strength and durability

Performance Gains:
Data coming soon!

304 Stainless Steel Construction:
3" into 2-1/2" mandrel bent 304 stainless steel tubing for maximum performance, corrosion resistance, durability and overall breath-taking appearance.

High-Flow Performance Muffler:
Featuring a corrosion resistant high temp. metallic black powder-coat this high flow, transverse stainless steel muffler improves sound and performance gains across the power band.

Dual 4" Gloss Black Tips:
Finishing off this system are dual 4" diameter, gloss black, stainless steel exhaust tips. The tips come with a laser-etched aFe power logo for a custom, stylish finish.

Exhaust Valve:
Incorporated is a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position and factory performance mode for maximum performance.

Resonator Delete Pipe:
An optional resonator delete pipe is compatible with this exhaust system (not included, sold separately) aFe part number: 49-36622 (No cutting or fabrication required).

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability.

Hassle-Free Installation:
This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware is included for a hassle-free installation.

Note:
Will NOT fit xDrive (AWD) Models

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Add power, sound and unique style to your BMW X5/X6 M with this cat-back system which produced gains of up to +20 horsepower and +33 lbs. x ft. torque as measured on our in-house dyno. Dual 3" to 2-1/2" mandrel-bent, brush finished 304 stainless steel tubing keeps exhaust flowing smoothly for power gains you can feel.  Designed with a transverse, high flow muffler finished in high temp powder coating for long lasting good looks and unique sound. The factory exhaust valve motor is used to regulate the exhaust flow from a closed-valve, sporty tone to wide-open, aggressive, performance sound. True quad, 3 1/2" polished stainless steel exhaust tips with laser etched aFe Power logo for a custom finish.

DETAILS:

• In-house dyno testing produced gains of up to +20 horsepower and +33 lbs. x ft. torque
• 3" - dual 2-1/2" mandrel bent, brush finished 304 stainless steel tubing outflows and outlasts factory exhaust
• True quad 3 1/2" diameter polished stainless steel exhaust tips with laser-etched aFe Power logo
• 100% CAD designed for a custom, high tolerance factory fitment
• Transverse, high flow muffler and Integrated mitered merge evenly distributes exhaust pulses
• Uses the factory exhaust valve motor and Includes extension leads

Performance Gains:
In-house dyno testing produced gains of up to +20 horsepower and +33 lbs. x ft. torque

Brush Finished 304 Stainless Steel Construction:
This exhaust system is constructed of 3" - dual 2-1/2" mandrel-bent, brush finished 304 stainless steel tubing for maximum flow, corrosion resistance and quality finish.

True Quad 3 1/2" Polished Stainless Steel Exhaust Tips:
Finishing off this system are quad 3 1/2" diameter polished stainless steel exhaust tips. Laser-etched with aFe Power logo for a custom, stylish finish.

Flow and Performance:
Transverse high flow muffler supports true quad pipe exhaust flow and unique exhaust notes. Finished in a high temperature metallic black powder coating that helps prevent corrosion.

Simple, Hassle Free Installation:
This system has been 100% CAD designed to factory tolerances for a direct bolt-on fitment with no cutting or modifications required. Quality stainless steel hardware and valve extensions included for a hassle-free installation.

TIG-Welded:
100% TIG-welded for race proven strength and durability.

Emissions Disclaimer:
This product does not require a CARB EO# (CARB Aftermarket Parts Verification Guidelines).

aFe POWER exhaust systems are engineered and manufactured in our Corona, California