BMW Performance Clutch Kits & Parts

BMW Clutch Stop

Improve your shifting experience with the BMW Clutch Stop. This adjustable clutch stop is designed to install beneath the clutch pedal, allowing you to set the precise stopping point just after the clutch disengages. Once adjusted, you can achieve consistent, smooth, and efficient shifts every time, saving valuable time and effort.

Benefits:

• Enhances shifting precision and consistency
• Saves time with smooth and fast shifts
• Adjustable design allows for personalized settings

Upgrade your BMW's shifting performance with the BMW Clutch Stop for a more enjoyable driving experience.

Turner Motorsport Lightweight N55 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N55-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N55 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N55 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together. Included in this kit are all necessary parts for a clutch installation and parts that should be replaced while easily accessible.

Fits the following BMWs:
E9X BMW 328i xDrive

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• Genuine BMW hardware with the exception of flywheel bolts which are an original equipment supplier
• 2 Genuine BMW E46 M3 transmission mounts
• Genuine BMW clutch fork pivot pin
• Original Equipment Supplier driveshaft washer gasket
• MTC universal flex disc (AKA Guibo) with hardware
• MTC driveshaft center carrier
• FAG pilot bearing
• Victor Reinz rear main seal

Fits the following BMWs:
E36 BMW M3 S50/52

The factory dual-mass flywheel in MINI N14 and N18 engines is engineered for comfort, minimizing drivetrain vibrations and smoothing out gear transitions. However, that comfort comes at a price—28.3 lbs. of rotational mass that dulls throttle response, slows acceleration, and hampers precise rev-matching. Dual-mass flywheels are also notoriously prone to failure under high-performance or tuned driving conditions, and their replacement costs can be steep.

The ECS Performance Lightweight Flywheel Kit eliminates these compromises with a precision-engineered, single-mass flywheel that delivers true enthusiast-grade performance. Weighing in at just 18.8 lbs, this flywheel sheds nearly 10 lbs. of rotating mass compared to OEM—instantly sharpening throttle response, improving clutch feel, and delivering quicker acceleration that transforms the driving dynamics of your MINI.

Performance-Oriented Design: This flywheel is specifically engineered to work with OE and aftermarket unsprung clutch discs. While dual-mass setups provide damping on stock vehicles, switching to a single-mass flywheel with an unsprung disc introduces more direct engagement—ideal for spirited daily driving or track-ready builds. Expect a more aggressive, performance-focused clutch feel.

Key Features:

Lightweight Construction: Sheds nearly 10 lbs. of rotating mass for faster revs and improved acceleration

4140 Chromoly Steel: Heat-treated to HRC 28–32 for outstanding strength, wear resistance, and dimensional stability

Precision-Balanced: Exceeds OEM G16 specification (175 g-mm) for smooth, high-RPM operation

Black Oxide Coating: Offers corrosion resistance and a professional finish

OE-Compatible Fitment: Designed to work seamlessly with N14 architecture clutch kits

SFI 1.1 Certified: Proven safe and reliable under extreme operating conditions

Optimized Step Height: Ensures maximum clutch clamping force and long-term durability

Performance Gains:

OEM Dual-Mass Flywheel Weight: 28.3 lbs

ECS Single-Mass Flywheel Weight: 18.8 lbs

Weight Savings: Nearly 10 lbs of reduced rotational mass

Results: Sharper throttle response, more precise rev-matching, and a more engaging driving experience

Kit Includes:

ECS N14/N18 Lightweight Performance Flywheel

South Bend Stage Two “Daily” Clutch Kit

Pilot Bearing

Throw-Out Bearing

Clutch Alignment Tool

(6) Genuine MINI Flywheel Bolts