An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Feramic facings.
Stage 2 Endurance Clutch Kits:
Recommended uses are daily and street with an emphasis on Rally and Endurance racing.
Rated to hold 495lbs/ft of torque.
Featuring a solid-hub center section for use with an OE dual-mass flywheel
Enhance your BMW's performance with a Heavy Duty Pressure Plate, designed for high-performance modifications. This pressure plate provides an increased clamp load without significantly raising pedal pressure. The Organic disc material boasts a high metal content, doubling the co-efficient of friction compared to stock linings and reinforcing rotational strength up to a 12,000 RPM burst point. Despite its robustness, this clutch system maintains a stock feel while ensuring durability and strength.
Upgrade your BMW's performance with a Stage 2 Daily Clutch Kit, providing enhanced durability and performance while maintaining a familiar driving feel.
Boost your BMW E39 M5's performance with the South Bend Clutch Stage 2 Daily Clutch, designed to handle increased horsepower and torque demands while maintaining everyday drivability. Engineered with high-quality materials and advanced technology, this clutch kit ensures durability and reliability for both street and moderate racing applications.
Upgrade your BMW E39 M5 with the South Bend Clutch Stage 2 Daily Clutch and experience improved performance without compromising on drivability.
Upgrade your BMW's clutch system with this Stage 3 Daily Clutch Kit, designed for high-performance vehicles seeking OEM-like start performance. Engineered with a Race Engineered (SS) pressure plate, this kit offers a significant load increase over stage 1 and 2 pressure plates, providing enhanced durability and performance. Experience a 20%-25% increase in pedal effort, ensuring precise control during acceleration. The discs are equipped with heat-treated wear-resistant hubs, drive plates, and springs for optimal load transfer and reliable operation. The sprung centers and marcel fin on the disc deliver dual dampening effects for smooth starts, similar to OEM performance. With a Performance Organic friction material, this kit enhances torque and RPM capability while maintaining low operating temperatures to minimize wear and glazing.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This clutch package is built to handle heavily modified cars and designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass and are assembled with all high carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction co-efficient, rapid heat dissipation and abrupt engagement characteristics.
Stage 3 Drag/Drift Clutch Kits:
Recommended uses are drag, pulling, drifting
Conservatively rated to hold 600lbs/ft of torque
Featuring a solid-hub center section for use with an OE dual-mass flywheel
This clutch package is built to handle heavily modified cars and designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass and are assembled with all high carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction co-efficient, rapid heat dissipation and abrupt engagement characteristics.
Stage 3 Drag/Drift Clutch Kits:
Recommended uses are drag, pulling, drifting
Conservatively rated to hold 650lbs/ft of torque
Featuring a solid-hub center section for use with an OE dual-mass flywheel
Upgrade your BMW's performance with the BMW E46 Z3 Stage 2 Endurance Clutch Kit, designed for durability and enhanced driving experience. This clutch kit is engineered to handle increased torque and power while maintaining everyday drivability. Perfect for enthusiasts looking to improve clutch performance without sacrificing comfort.
Experience improved clutch performance with the BMW E46 Z3 Stage 2 Endurance Clutch Kit.
MINI F54 to F60 Stage 1 Daily Clutch Kit is engineered for high-performance modifications, offering superior strength and durability for MINI vehicles. This heavy-duty clutch kit features an upgraded pressure plate with increased clamp load while maintaining a stock-like pedal feel. The organic disc material, enriched with high metal content, provides a friction coefficient twice that of the stock lining and supports rotational strength up to 12,000 RPM.
BMW E46 E39 Stage 2 Daily Clutch Kit is designed for high-performance modifications with a focus on durability and strength. This clutch kit features a Heavy Duty Pressure Plate that increases clamp load without significantly raising pedal pressure. The Organic disc material enhances friction coefficient and rotational strength, making it suitable for up to 12,000 RPM. It maintains a stock-like feel while offering enhanced performance and reliability.
Upgrade your BMW E46 or E39 with the Stage 2 Daily Clutch Kit for improved performance and durability.
BMW E39 M5 Stage 3 Daily Clutch Kit is engineered for high-performance demands and daily driving needs. This clutch kit is designed to handle increased power and torque while maintaining smooth engagement and pedal feel. Ideal for BMW enthusiasts seeking enhanced durability and performance without sacrificing daily drivability.
This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity.
Stage 2 Drag/Drift Clutch Kits:
Recommended uses are drag racing, drifting and limited street
Conservatively rated to hold 370lbs/ft of torque.
Featuring a solid-hub center section for use with an OE dual-mass flywheel
This clutch package is designed for high HP vehicles desiring a start performance similar to O.E. The pressure plate is Race Engineered (SS) and SFI approved with significant load increase over stage 1,2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. The sprung centers on the disc in conjunction with the marcel fin between the linings create a dual dampening effect that simulates O.E. start performance. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures which reduces wear and glazing.
Stage 3 Daily Clutch Kits:
Recommended usages are daily, spirited street and occasional track
Conservatively rated to hold 400lbs/ft of torque
Featuring a sprung-hub center section for use with a single-mass flywheel
These adjustable camber/caster plates offer precise control over camber and caster settings, allowing for optimized performance on the track. Crafted with high-quality materials, they ensure durability and reliability even under racing conditions. With easy adjustability and precise engineering, they provide enhanced handling and cornering capabilities, giving you a competitive edge on the race circuit.
