BMW Engine Parts

ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Vi...

T#:49648341

Part#: 910.1027

In Stock

$ 1,344.00 USD

Add to Wish List

Qty

$ 1,344.00 USD

Add to Wish List

NOTE: Select PT-CAN2 for all MHD+ and EcuTek cars with automatic transmissions. For BM3 and all manual transmission cars select PT-CAN.

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

King Racing - BMW S65 GPC Coated Rod Bearings (STDX) - E9X M3 ...

T#:51110168

Part#: CR8066GPC-STDX

In Stock

13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

KING Coated & Graded GPC Racing Connecting Rod Bearing Set - Standard...

NEW FROM KING - PRE-ORDER NOW! Expected ETA of Mid-April

T#:51110163

Part#: CR1057GPC

In Stock

44% off MSRP $ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD

Add to Wish List

Qty

44% off MSRP

$ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD

Add to Wish List

Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

KING Coated & Graded GPC Racing Connecting Rod Bearing Set - BMW S85 ...

NEW FROM KING - PRE-ORDER NOW! Expected ETA of Mid-April

T#:51110164

Part#: CR1057GPC-STDX

In Stock

13% off MSRP $ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 436.99 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 436.99 USD

Limited Qty Sale

Add to Wish List

Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

King Racing - BMW S65 GPC Coated Rod Bearings (STD) - E9X M3 ...

T#:51110167

Part#: CR8066GPC

In Stock

13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

Qty

13% off MSRP

$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD

Limited Qty Sale

Add to Wish List

GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!

Show More Show Less

Intensity Lithium-ION Battery - i34RX - 11.5lbs

T#:54388454

Part#: I34RX

Ships in 6 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

Whether you're building a dedicated track weapon or upgrading your street machine for ultimate reliability, unsprung and upper-chassis weight is the enemy of performance. Positioned high up in the engine bay or rear corners, a heavy factory battery negatively impacts your car's center of gravity.

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Sep 8, 2026

$ 302.99 USD

Add to Wish List

Qty

$ 302.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.

Black Forest Industries Engine Mounts - Stage 1 - BMW E30 / E36 / E46...

T#:50934264

Part#: BFI-BMW-90-01

Ships on Sep 8, 2026

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Eliminate the "drive-line slop" common in the E36 and E46 chassis with this Stage 1 Engine Mount kit.

BFI Transmission Mounts - Stage 1 - BMW E30 / E36 / E46 / E9X / Z3 / ...

T#:50934269

Part#: BFI-BMW-TRANS-01

Ships on Sep 8, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.

Black Forest Industries Engine Mounts - Stage 1 - BMW F8X M2 / M3 / M...

T#:50934268

Part#: BFI-BMW-F8X-M1

Ships on Sep 8, 2026

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

By upgrading to a solid-core poly design, you eliminate the risk of fluid-filled mount failure while gaining a significantly more stable drivetrain platform.

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

T#:53255639

Part#: B58G2P600N-2P

Ships in 4 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-15-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The Pure Turbos NEW Pure600 for the BMW B58 (Gen 2) is a precision-engineered turbo upgrade designed specifically for 2-port cylinder head applications, offering a substantial boost in performance without the need for a core exchange. This unit features a custom aftermarket inlet housing similar to the OEM design for a true plug-and-play installation, integrating seamlessly with your factory turbine manifold. Internally, the Pure600 is equipped with an upgraded billet compressor wheel and a high-flow turbine wheel, both optimized to increase exhaust efficiency and support power levels exceeding 550 wheel horsepower, depending on your supporting modifications and fuel type. Durability and reliability are central to this turbocharger’s design, which includes an upgraded bearing housing to withstand the increased stresses of high-load performance. To ensure smooth, long-term operation, every unit is VSR high-speed balanced to exacting standards. While the Pure600 can run on stock tunes or off-the-shelf maps, custom tuning is highly recommended to fully unlock its potential. This upgrade provides a streamlined path to elite B58 performance, combining robust engineering with a straightforward installation process that retains the refined drivability of your BMW.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

ReFlex+ Advanced I/O Integration - BMW B58/S58 Plug-n-Play - MOTIV/Vi...

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

King Racing - BMW S65 GPC Coated Rod Bearings (STDX) - E9X M3 ...

KING Coated & Graded GPC Racing Connecting Rod Bearing Set - Standard...

KING Coated & Graded GPC Racing Connecting Rod Bearing Set - BMW S85 ...

King Racing - BMW S65 GPC Coated Rod Bearings (STD) - E9X M3 ...

Intensity Lithium-ION Battery - i34RX - 11.5lbs

Radium - Split-Flow Flex Fuel Sensor Adapter

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

Black Forest Industries Engine Mounts - Stage 1 - BMW E30 / E36 / E46...

BFI Transmission Mounts - Stage 1 - BMW E30 / E36 / E46 / E9X / Z3 / ...

Black Forest Industries Engine Mounts - Stage 1 - BMW F8X M2 / M3 / M...

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results