BMW Engine Parts

Boost your engine's capabilities with the Dinan N-Series Performance Ignition Coils - a vivid set of six in striking red. Precision-engineered to amplify ignition power, these coils guarantee heightened throttle response, seamless idling, and a notable surge in overall power. Meticulously crafted for durability, they seamlessly integrate into your vehicle, enhancing both performance and aesthetic appeal under the hood.

Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt

Protect your N5X/S55 from catastrophic failure with this must-have upgrade!

The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.

Key Benefits:

Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:

Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:

Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Enthusiast Bundle: Turner Motorsport Crank Seal Guard with ECS Kevlar-Reinforced Belt

Protect your N5X/S55 from catastrophic failure with this must-have upgrade!

The Turner Motorsport Crank Seal Guard is meticulously designed to safeguard your engine’s crank seal from potential damage caused by a shredded serpentine belt. Oil or coolant leaks can lead to accessory belt slippage, fraying, and tearing, which can send belt debris behind the harmonic balancer and into the crank seal, risking serious engine damage.

Key Benefits:

Shields crank seal from accessory belt debris, preventing engine failure Custom-fit for N54/N55/S55 engines Zinc-coated fasteners for superior corrosion resistance Durable 6061 billet aluminum construction, with Turner blue anodized finish for added strength and style Cutting-Edge Design:

Designed using FARO laser scanning and Solidworks CAD for precision fitment Rigorous testing ensures reliable protection in all conditions Easily installs with 2 securing bolts torqued to 20Nm ECS Performance Kevlar-Reinforced Accessory Belt:

Reduced elongation for consistent performance over time Enhanced shock and impact resistance Superior oil and temperature resistance tested to JASO E 109-94 and SAE J2432 standards Ensure long-term engine health and peace of mind with the Turner Motorsport Crank Seal Guard and ECS Kevlar-Reinforced Accessory Belt combo. Prevent the "when, not if" risk of belt-related engine failure today!

Enhance your BMW’s performance and style with this unbeatable combo! The Turner Motorsport Carbon Fiber Strut Brace and Engine Cover are the ultimate pair to upgrade chassis stability and engine bay aesthetics—all with a single purchase.

G20/G42 Carbon Fiber Strut Brace

For G20 and G42 BMW models equipped with the B48 or B58 engines, the driving thrill is undeniable. Yet, these cars lack a crucial component found in high-performance M models: structural chassis bracing. With Turner Motorsport’s 3-point Carbon Fiber Strut Brace, you’re adding the missing link to your BMW, mirroring the handling stability of an M3 or M4. This is the only strut brace that elevates G20/G42 handling by emulating the stiffness of an M-series chassis, giving you a dynamic edge on both road and track.

The strut brace fits seamlessly into your BMW using the original factory hardware and an included stud kit, offering a hassle-free, direct installation with no modifications required. Designed and tested in-house by Turner Motorsport, this brace reduces chassis flex, enhancing control during spirited driving and providing a tighter, more responsive feel. Constructed from high-strength carbon fiber with billet aluminum end brackets, this strut brace boosts performance while adding an eye-catching focal point to your engine bay.

Strut Brace Features:

Enhanced Chassis Rigidity: Reduces flex by linking the strut towers, promoting a more precise steering response. Street and Track Ready: Engineered for the best of both worlds, offering stability in all driving conditions. Premium Carbon Fiber & Billet Aluminum: Lightweight yet highly rigid, with a stunning woven 2x2 twill finish. Easy Installation: Fits perfectly with stock mounting points using supplied hardware, ensuring a hassle-free setup. Carbon Fiber: Performance & Style

Turner’s strut brace uses structural carbon fiber, designed to endure the rigors of aggressive driving without compromising aesthetics. The brace's distinct, gloss-finished carbon fiber weave adds a sophisticated, high-performance look akin to exotic supercars. Engineered for precision, this brace effectively distributes cornering forces between the strut towers, minimizing chassis distortion and maintaining optimal wheel alignment, even in hard turns.

Turner Motorsport G-Chassis Carbon Fiber Engine Cover for B58 Engines

Give your G-Chassis BMW’s engine bay a polished, refined look with Turner’s Carbon Fiber Engine Cover. This direct replacement cover is crafted from hand-laid, gloss-finished carbon fiber, delivering a resilient, UV-protected finish. With an OE-style indentation for the BMW badge, this cover complements your engine bay with a sleek, factory look that stands out.

Engine Cover Highlights:

Direct Fitment: Seamlessly replaces the stock cover, utilizing factory mounting grommets and hardware. Durable Gloss Finish: Ensures long-lasting shine and UV protection. Distinctive Style: A premium upgrade that elevates the aesthetic of your B58 engine. Installation Notes:

Simply transfer the OE grommets and badge from the stock cover to the carbon fiber engine cover for a perfect fit—installation takes seconds!

Transform the appearance of your engine bay with the G Chassis S58 Carbon Engine and ECU Covers from Turner. These carbon fiber covers are a striking upgrade for the S58, replacing the plain factory plastic engine and ECU covers in just minutes. As one of the initial modifications for a new car, these covers offer an easy way to enhance the G80 M3 or G82 M4 without extensive dismantling.

The ECU cover is a direct replacement, while the engine cover allows for the transfer of the factory "M" badge and grommets. Crafted with meticulous attention, the Turner S58 Carbon Engine and ECU covers start with molds of the original components to ensure optimal factory-form fitment. Made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, they boast a glossy clear coat for UV-protection and enhanced durability. Explore Turner's range of carbon fiber pieces to further elevate your G80 M3 or G82 M4.

Set of 6 Blue Performance Ignition Coils

Receive a complimentary set of 6 Blue Performance Ignition Coils with your purchase of the G Chassis S58 Carbon Engine and ECU Covers. Engineered for performance and efficiency, Turner BMW ignition coils are modified to increase energy output, resulting in a faster, more efficient, and consistent burn. The distinctive blue housing not only enhances performance but also adds a unique aesthetic to your engine. Ensure your engine's health, performance, and efficiency by choosing Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

High oil temps are one of the triggers that causes the engine electronics to curtail boost, cut power, and possibly switch to limp mode. The stock oil system was not designed with enough cushion for running more boost. We have seen limp modes come from stock vehicles on the race track. To prevent limp modes and reduced performance, Dinan has developed this oil cooler kit with much more surface area than stock.

The Dinan oil cooler kit fits in the stock location behind the front spoiler on the passenger side of the car. This is an ideal location to maximize the ram air effect from the front bumper. New air ducts and vents into the wheel well help improve air flow. PTFE hoses with race-quality fittings and all hardware are included for install. Some Dinan oil cooler kits can even be used to upgrade cars that never came with an oil cooler. Once you see the Dinan oil cooler side-by-side with the factory cooler, you will understand why it's so much better. The Dinan cooler is bigger in every way - larger capacity, greater surface area, and more cooling tubes.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The oil cooler kit is worth 3 points towards your Dinan badge.

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi - Sedan