BMW Engine Parts

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Vargas N54 To B58 Coil Conversion Kit

T#:7292057

Part#: VTT-N54-B58-CNV

Ships in 10 Business Days

Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

Sale - Save 5%

$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.

Show More Show Less

Power Pulley DPK Belt Kit

For vehicles with production date from 6/2008

T#:50934275

Part#: 13-001D

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

T#:53255639

Part#: B58G2P600N-2P

Ships in 5 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-15-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The Pure Turbos NEW Pure600 for the BMW B58 (Gen 2) is a precision-engineered turbo upgrade designed specifically for 2-port cylinder head applications, offering a substantial boost in performance without the need for a core exchange. This unit features a custom aftermarket inlet housing similar to the OEM design for a true plug-and-play installation, integrating seamlessly with your factory turbine manifold. Internally, the Pure600 is equipped with an upgraded billet compressor wheel and a high-flow turbine wheel, both optimized to increase exhaust efficiency and support power levels exceeding 550 wheel horsepower, depending on your supporting modifications and fuel type. Durability and reliability are central to this turbocharger’s design, which includes an upgraded bearing housing to withstand the increased stresses of high-load performance. To ensure smooth, long-term operation, every unit is VSR high-speed balanced to exacting standards. While the Pure600 can run on stock tunes or off-the-shelf maps, custom tuning is highly recommended to fully unlock its potential. This upgrade provides a streamlined path to elite B58 performance, combining robust engineering with a straightforward installation process that retains the refined drivability of your BMW.

Show More Show Less

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

Vargas N54 To B58 Coil Conversion Kit

Power Pulley DPK Belt Kit

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results