BMW Engine Parts

Fuel injector and fuel supply rail caps

T#:5135630

Part#: AGA-CI-Y12

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Don't let dirt be the reason for bad fuel injectors.

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

T#:641167

Part#: BMW-N54-CAP

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather

Show More Show Less

Dielectric Tune-Up Grease 3oz Tube

T#:3672391

Part#: 22058

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Protects electrical connections and wiring from salt, dirt and corrosion

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

In Stock at Vendor

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

Clean Oil Drain Plugs - M12 x 1.5mm

T#:5135644

Part#: AGA-CODP-12-15

In Stock

$ 99.00

This product was last offered at the strikethrough price on
06-22-2026

$ 93.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 99.00

This product was last offered at the strikethrough price on
06-22-2026

$ 93.99 USD

Limited Qty Sale

Add to Wish List

Change the way you change oil

N63 chain tensioning kit

T#:5175740

Part#: AGA-11-9-900-K

Ships in 7 Business Days

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

A must have for a timing job.

3/8" Dr. 5/8" Extended Spark Plug Socket

T#:2242226

Part#: W80533

Ships in 1 Business Day

$ 20.25 USD

Add to Wish List

Qty

$ 20.25 USD

Add to Wish List

Extended socket length reaches confined areas.

Piston Ring Comp 3-1/2" to 7"

T#:2242223

Part#: W80573

Ships in 1 Business Day

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 7 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

Autel Autolink AL329

T#:2914116

Part#: AL329

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

OBDII Code Reader

AGA Tools N63 Updated Rear Engine Cover - BMW N63 (2008-2019) ...

T#:26404835

Part#: AGA-N63-6061-URC

Ships in 7 Business Days

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

N62 secondary air cleaner kit

T#:5175756

Part#: AGA-N62-SEC-AIR

Ships in 7 Business Days

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

Introducing the Turner Motorsport BMW N62 Secondary Air Injection Cleaning Kit from AGA Tools. This comprehensive kit is the ultimate solution for clearing blocked secondary air injection systems in the BMW N62 Engine. Address stubborn clogs effectively and enhance engine performance with our specialized kit. For particularly challenging blockages, consider the N62 Secondary Air Cleaner/Carbon Hook Combo Kit, also available. Access insightful information through the provided instructional video at https://youtu.be/CMOjFAKUt30.

Complete kit designed for clearing blocked secondary air injection in the BMW N62 Engine.
Specialized solution for effective cleaning and improved engine performance.
Additional option with the N62 Secondary Air Cleaner/Carbon Hook Combo Kit for stubborn clogs.
Comprehensive and user-friendly, addressing common issues.
Informational video available for easy guidance.

Ensure optimal performance for your BMW N62 Engine with the Turner Motorsport AGA Tools Secondary Air Injection Cleaning Kit, your go-to solution for a reliable and unblocked system.

Show More Show Less