BMW Engine Parts

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Ferrea Performance Intake Valve - Stock Size

T#:583445

Part#: F1550P

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

Ferrea Performance Exhaust Valve - Stock Size

T#:583444

Part#: F1552P

Ships on Aug 31, 2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

In Stock

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

AutoTecknic Dry Carbon Charge Cooler Tank Cap Cover - Gloss Finish ...

T#:39971051

Part#: BM-0032

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

MINI R53 MSD Performance Coil Pack / Red Wire Set

T#:31324148

Part#: 8239KT2KT

In Stock

$ 268.99 USD

Add to Wish List

Qty

$ 268.99 USD

Add to Wish List

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

MSD Coil Pack
MSD Wire Set - Red
Inductance: 7mH
Maximum Voltage: 36,000 Volts
Primary Resistance: 0.51 OHMs
Secondary Resistance: 12K OHMs
Turns Ratio: 77:1

Key Benefits:

Upgraded performance over stock coil pack
Enhances ignition efficiency and engine performance
High voltage output of 36,000 volts for stronger sparks
Low primary resistance of 0.51 OHMs for efficient energy transfer
High secondary resistance of 12K OHMs for improved performance
Durable construction for long-lasting use

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

AutoTecknic Dry Carbon Fiber Engine Cover - Version 2 - BMW G80 M3, G...

T#:46203538

Part#: ATK-BM-0408-V2

Ships in 8 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Performance Ignition Wire Set - Red W10 W11 1.6L Engine

T#:15777320

Part#: 32879

In Stock

11% off MSRP $ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

Qty

11% off MSRP

$ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 135.99 USD

Add to Wish List

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

Restores power and performance to your Mini
Recommended replacement at 60,000-mile intervals
Addresses issues such as low spark and misfires
Prevents rust buildup for consistent spark delivery
Includes plug wires for cylinder 1

Show More Show Less

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

T#:9416039

Part#: B58GCMID2-4-INS

Ships on Aug 28, 2026

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT

Show More Show Less

N20 Stage 1 Turbocharger upgrade - New

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships on Aug 28, 2026

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

Ferrea High Performance Valve Kit - Standard Size

T#:28770000

Part#: FER-HPVK-N20-T

Ships in 4 Business Days

$ 619.99 USD

Add to Wish List

Qty

$ 619.99 USD

Add to Wish List

Water Pump/Alternator Accessory Belt Service Kit w/ Kevlar Reinforced...

T#:22097556

Part#: 6PK1548TKT

Ships on Aug 28, 2026

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Accessory Belt, tensioner assembly, and your idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G42 2-SERIES COUPE...

T#:21209809

Part#: ATK-BM-0008-G42-

Ships in 8 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time! Dry carbon fiber is formed using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the "wet" method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced. On top of that they coat this product in a UV resistant coating extending the life of this cap significantly! Don't wait and get yours today! You will not be disappointed by the fit and finish!

Show More Show Less

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Autotecknic Carbon Fiber Engine Cover - A90 Supra

T#:21275553

Part#: ATK-TO-0407

Ships in 8 Business Days

$ 550.00 USD

Add to Wish List

Qty

$ 550.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Stand out from the rest when you open your hood with this full carbon fiber engine cover for the A90 Supra! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less

AUTOTECKNIC Dry Carbon Competition Fuel Cap Cover

T#:21045518

Part#: ATK-BM-0006-BC

Ships in 8 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!

Show More Show Less

AutoTecknic Pre-Preg Carbon Engine Cover - F97 X3M | F98 X4M ...

T#:39497962

Part#: BM-0707

Ships in 8 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Turner Motorsport offers this high-quality AutoTecknic Pre-Preg Carbon Engine Cover, ensuring BMW X3M and X4M owners can upgrade their vehicle with a refined, performance-oriented aesthetic.

AUTOTECKNIC Dry Carbon Competition Oil Cap Cover - G87 M2

T#:21045531

Part#: ATK-BM-0008-G8X-

Ships in 8 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Add some beautiful carbon details to your engine bay starting with your oil filler cap! Made from high-quality autoclave pressed dry carbon, this cap is not has a consistent beautiful weave, its highly durable and can stand the test of time!

Show More Show Less

AUTOTECKNIC Dry Carbon Fiber Battery Terminal Cover - G87 M2 ...

T#:21012623

Part#: ATK-BM-0420-G87

Ships in 8 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

The boldly styled G87 already touts carbon features but carbon fiber is not very often displayed in the engine bay. If you are looking to give your engine bay some carbon spark, AUTOTECKNIC introduces you to their dry carbon battery terminal cover to beautify your engine bay and bring a smile to your face every time you open the hood of your S58 monster! Made from high-quality carbon, this product is sure to stand the test of time!

Show More Show Less

AutoTecknic Dry Carbon ECU Battery Terminal Cover (Satin Finish) G87 ...

T#:39329331

Part#: BM-0420-S

Ships in 8 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover (Satin Finish) – the ultimate choice for discerning enthusiasts.

AutoTecknic Dry Carbon V2 Engine Bay Trim Set - G80 M3 | G82/ G83 M4 ...

T#:39329307

Part#: BM-0388-DCG

Ships in 8 Business Days

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

Perfect for BMW G80 M3 and G82/G83 M4 owners seeking a refined and aggressive engine bay upgrade, the AutoTecknic Dry Carbon V2 Engine Bay Trim Set delivers a flawless combination of style, durability, and performance.

Show More Show Less

VTT B58 Gen 1 Billet Aluminum Valve Cover - Silver, Black, Red, Or Bl...

T#:3658005

Part#: B58BLTVLVCVR

Ships in 10 Business Days

Starting at $ 1,763.99 USD

Add to Wish List

Starting at $ 1,763.99 USD

Add to Wish List

Introducing Vargas Turbo's B58 Gen 1 Billet Valve cover. VTT created these for the B58 owner who wants to add a great look to their engine bay while also getting rid of the stock plastic valve cover which has problematic PCV systems and can crack with higher mileage. Vargas Turbo Technologies recommends running it with their B58 engine catch can kit (See listing options). VTT offers a number of breather choices for extra crankcase venting including our billet oil cap breather, as well as their one-way Stainless breathers.

Show More Show Less

AutoTecknic Dry Carbon ECU Battery Terminal Cover - Gloss Finish - G8...

T#:39329329

Part#: BM-0420-G

Ships in 8 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Elevate your BMW's style and performance with the AutoTecknic Dry Carbon Fiber ECU Battery Terminal Cover – the ultimate choice for discerning enthusiasts.

AUTOTECKNIC Dry Carbon Fiber Engine Cover - G87 M2

T#:21045545

Part#: ATK-BM-0408-G87

Ships in 8 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could achieve.

Show More Show Less

Autotecknic Dry Carbon Fiber Engine Cover - G87 M2

T#:39329324

Part#: BM-0408

Ships in 8 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

Experience the power of premium dry carbon fiber and make a bold statement on the road. Upgrade your G87 M2 with confidence and unleash the true potential of your engine with this exquisite dry carbon fiber cover.

Show More Show Less

Vargas N54 To B58 Coil Conversion Kit

T#:7292057

Part#: VTT-N54-B58-CNV

Ships in 10 Business Days

Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

Sale - Save 5%

$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.

Show More Show Less

AutoTecknic Vacuumed Carbon Fiber Engine Cover - F80 M3 F82 M4 ...

T#:396229

Part#: BM-0401

Ships in 8 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

Don't let your engine bay bore you. A carbon fiber engine cover makes your bay adds a sporty look instantly. We use vacuum technology to ensure every engine cover fits just like OEM. Uses rubber mounts from factory engine cover.

Show More Show Less

Autotecknic Dry Carbon Fiber Engine Cover - MkV Supra

T#:5189192

Part#: TO-0407

Ships in 8 Business Days

$ 550.00 USD

Add to Wish List

Qty

$ 550.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic's dry carbon fiber engine cover features high-quality carbon fiber that aesthetically improves the engine bay appearance. This engine cover is made of 3K twill weave pre-preg carbon fiber that creates the beauty of a uniform pattern that only dry carbon could. achieve. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

AutoTecknic Dry Carbon Engine Cover - F95 X5M | F96 X6M

T#:39295568

Part#: BM-0385

Ships in 8 Business Days

$ 495.00 USD

Add to Wish List

Qty

$ 495.00 USD

Add to Wish List

Designed for BMW F95 X5M and F96 X6M owners seeking an elevated under-hood appearance, the AutoTecknic Dry Carbon Engine Cover delivers premium styling and race-inspired refinement.

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 2 - For Vario...

T#:39971048

Part#: BM-0008

Ships in 8 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

A precision-crafted dry carbon fiber upgrade that enhances the engine bay of compatible BMW and MINI vehicles with a lightweight, motorsport-inspired design and easy OEM-style installation

Ferrea High Performance Valve Kit - B58

T#:29035336

Part#: FER-HPVK-B58-T28

Ships in 4 Business Days

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Ferrea High Performance Valve Kit - B58

T#:29035337

Part#: FER-HPVK-B58-T29

Ships in 4 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

VTT S65 Billet Valve Cover Set

T#:20749241

Part#: S65BVC

Back Ordered

Starting at $ 1,698.99 USD

Add to Wish List

Starting at $ 1,698.99 USD

Add to Wish List

VTT is proud to announce the S65 Billet Valve cover set. VTT created these for the S65 owner who wants to add a great look to their engine bay while also getting rid of the stock valve cover which are very problematic and can crack/leak/delaminate with higher mileage. Eliminating the leak-prone factory oil cap design with a threaded cap with O-ring Seal, VTT has also added two -10 ORB bungs which allow you complete freedom to plumb in a catch can, or vent system of your choice. The internal baffling is 100% in place to knock down any oil from the vapors before being expelled. Factory PCV has also been kept in place so these can be run in essentially any configuration required. 100% CNC 6061-T6 Aircraft aluminum construction Anodized in a variety of colors Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover – only 1.8 lbs difference) TWO shrouded -10 ORB ports which Give the end-user variety for setting up their Valve Cover and PCV System Only Billet option on the market with a threaded oil cap, and PCV choices Works with our 1' one-way breather for ultimate crankcase venting Kit includes: Two Billet Valve covers Two US-sourced Viton Gaskets

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MSD Performance Coil Pack for MINI

Kits Include:

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results