Turbos

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

6 Port Turbo Heat Shield Kit - Black - BMW B58 Engine

T#:27405485

Part#: A0411A-BLK

Ships on Sep 11, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

The Verus Engineering 6 Port Turbo Heat Shield is perfect for keeping heat around the turbo area and freeing up engine bay space. If running an aftermarket intake; it is a great addition to reduce heat soak as well. Removing the factory resonator and heat shield greatly improves engine bay aesthetics and available room. The heatshield is produced from 2.0mm thick stainless steel sheet metal which is CNC laser cut, CNC bent, and then finished in high-temp Cerakote. The heat shield was designed off scan data obtained internally for an OE-like fit. Utilizing our unit, you can expect a better-looking engine bay, better thermal properties, and less heat soak. FEATURES Excellent Coverage of Turbine and Manifold Area Improved Engine Bay Aesthetics Thick 2.0mm Stainless Construction Improved Heat Rejection Characteristics Simple Bolt-On Install SPECIFICATIONS 2.0mm Thick 304 Stainless Sheet CNC Laser Cut CNC Press Break Formed Cerakote High-Temp Coated Stainless Hardware INCLUDED Cerakote Coated Stainless Heat Shield Main Cover Cerakote Coated Stainless Heat Shield Side Cover Hardware Kit, Includes All Hardware Necessary for Install

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

T#:32118904

Part#: EVE-X56M-CHG

Ships in 2 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M Pre-LCI F96 X6M Pre-LCI G09 XM Pre-LCI G05 X5 M60i Pre-LCI G06 X6 M60i Pre-LCI G07 X7 M60i Pre-LCI ** This item is not eligible for return **

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

T#:32118905

Part#: EVE-X56M-LCI-CHG

Ships in 5 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M LCI F96 X6M LCI G09 XM LCI G05 X5 M60i LCI G06 X6 M60i LCI G07 X7 M60i LCI ** This item is not eligible for return **

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Silver 6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra ...

T#:42099847

Part#: A0289A-SLV

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Verus Engineering Turbo Heat Shield – 6-Port | 2021+ Toyota GR Supra (A90/A91) Engineered for performance and built to endure, the Verus Engineering Turbo Heat Shield is a must-have upgrade for the 6-port 2021+ Toyota GR Supra. Designed to improve thermal efficiency and engine bay airflow, this shield helps reduce heat soak—especially critical when running an aftermarket intake setup. Constructed from 2.0mm thick stainless steel, each piece is laser cut and precision CNC bent for consistent fit and finish. Finished in a high-temperature Cerakote coating, the shield is built to withstand extreme conditions while delivering a clean, motorsport-inspired look. Developed using in-house scan data, the shield ensures OEM-like fitment without compromise. By removing the restrictive factory resonator and OEM turbo heat shield, the Verus unit opens up the engine bay, enhances service access, and significantly improves the visual appeal of your turbo setup. Compatible with the popular Pure800 Turbo Upgrade, this component is ideal for high-performance builds and daily drivers alike. Highlights: 2.0mm stainless steel construction for strength and durability High-temp Cerakote coating for maximum thermal resistance Reduces heat soak and improves intake air temperatures Eliminates factory turbo resonator and bulky heat shield Improves engine bay space and appearance Direct-fit design using in-house scan data for precise fitment Fully compatible with Pure800 Turbo Upgrade Take control of your Supra’s heat management and elevate both form and function under the hood with this high-quality thermal solution from Verus Engineering.

Show More Show Less

6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra

T#:42099845

Part#: A0289A-BLK

Back Ordered

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Verus Engineering Turbo Heat Shield – 6-Port | 2021+ Toyota GR Supra (A90/A91) Engineered for performance and built to endure, the Verus Engineering Turbo Heat Shield is a must-have upgrade for the 6-port 2021+ Toyota GR Supra. Designed to improve thermal efficiency and engine bay airflow, this shield helps reduce heat soak—especially critical when running an aftermarket intake setup. Constructed from 2.0mm thick stainless steel, each piece is laser cut and precision CNC bent for consistent fit and finish. Finished in a high-temperature Cerakote coating, the shield is built to withstand extreme conditions while delivering a clean, motorsport-inspired look. Developed using in-house scan data, the shield ensures OEM-like fitment without compromise. By removing the restrictive factory resonator and OEM turbo heat shield, the Verus unit opens up the engine bay, enhances service access, and significantly improves the visual appeal of your turbo setup. Compatible with the popular Pure800 Turbo Upgrade, this component is ideal for high-performance builds and daily drivers alike. Highlights: 2.0mm stainless steel construction for strength and durability High-temp Cerakote coating for maximum thermal resistance Reduces heat soak and improves intake air temperatures Eliminates factory turbo resonator and bulky heat shield Improves engine bay space and appearance Direct-fit design using in-house scan data for precise fitment Fully compatible with Pure800 Turbo Upgrade Take control of your Supra’s heat management and elevate both form and function under the hood with this high-quality thermal solution from Verus Engineering.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MAC Single Turbo Boost Solenoid - N54 N55

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

6 Port Turbo Heat Shield Kit - Black - BMW B58 Engine

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

N54 Single Turbo Conversion Oil Fitting

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

Turbo & Intake Heat Shield - Gen2 B58

Turbo & Intake Heat Shield - Gen1 B58

Silver 6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra ...

6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results