Turbos

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ EWG

EWG models only

T#:13957900

Part#: N55PURE500EWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The PURE500 turbo from Pure Turbos is sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957903

Part#: N55PURE500PWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

These PURE500 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Genuine MINI Heat Resistant Plate

T#:174318

Part#: 11657634747

In Stock

$ 32.55 USD

Add to Wish List

Qty

$ 32.55 USD

Add to Wish List

Genuine MINI HEAT RESISTANT PLATE
Fits BMW Engines including:
N14,N18

Pure Turbos NEW B58 Gen2 PURE900 Turbo Upgrade - 6 Port - BMW G01/G02...

T#:30231269

Part#: PURE900-GB58-6

In Stock

$ 3,626.99

This product was last offered at the strikethrough price on
07-14-2026

$ 3,626.00 USD

Add to Wish List

Qty

$ 3,626.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE900 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 800+ wheel horsepower!

Show More Show Less

Pure Turbos B58 Gen1 PURE600 Turbo Upgrade - F22/23 M240, F3X 340/440...

T#:46684829

Part#: B58G1P600

Ships in 4 Business Days

$ 1,343.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

Looking to upgrade your turbo? Pure Turbos now offers their PURE600 B58 Turbo Upgrade kit! Pure Turbo's PURE600 turbo kit is designed to support 550+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW on the street and for occasional track outings.

Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957911

Part#: N55PURE750PWG

Ships in 10 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE800 Turbo Upgrade - 6-Port - BMW G01/G02...

T#:38452825

Part#: GB58PURE800CAST

Ships on Sep 21, 2026

$ 3,107.99

This product was last offered at the strikethrough price on
07-14-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE800 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 700+ wheel horsepower!

Show More Show Less

Pure Turbos A90 Supra PURE800 Turbo Upgrade - A90 MKV Supra B58 ...

T#:588598

Part#: A90P800K

Ships in 4 Business Days

$ 4,466.99

This product was last offered at the strikethrough price on
07-16-2026

Starting at $ 4,094.00 USD

Add to Wish List

Starting at $ 4,094.00 USD

Add to Wish List

Pure Turbos have changed the game yet again with the Pure800 Turbo upgrade kit for the A90 Toyota Supra. This is dollar for dollar the best upgrade you can do, and will dramatically transform how the car feels and performs.

Show More Show Less

Pure Turbos N55 Turbo Installion Kit - N55 3.0L

T#:590383

Part#: PUREN55INSTKIT

Ships in 2 Business Days

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

Includes everything you need to install your upgraded turbo from Pure Turbos.

Genuine MINI Return Hose

T#:36104

Part#: 11537600674

Ships in 1 day

13% off MSRP $ 64.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.62 USD

Add to Wish List

Qty

13% off MSRP

$ 64.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 55.62 USD

Add to Wish List

Genuine MINI COOLANT HOSE, RETURN
Fits BMW Engines including:
N18

Genuine MINI Air Channel - Short Inlet

T#:43655

Part#: 13742756043

Ships in 1 day

6% off MSRP $ 126.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.18 USD

Add to Wish List

Qty

6% off MSRP

$ 126.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.18 USD

Add to Wish List

Genuine MINI AIR CHANNEL
Fits BMW Engines including:
N14

Pure Turbos High Flow Silicone Turbo Inlet - F-Series N55 3.0L ...

T#:20254647

Part#: F-HFSI-N55

In Stock

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

Plastic piping fails over time, dont let this cause poor performance for your N55. Replace your stock plastic piping with this Pure Turbos High Flow Silicone inlet pipe.

N54 Single Turbo Conversion Oil Fitting

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Hollow Bolt - Priced Each

T#:362753

Part#: 07119905176

In Stock

1% off MSRP $ 9.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8.92 USD

Add to Wish List

Qty

1% off MSRP

$ 9.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8.92 USD

Add to Wish List

Genuine MINI Hollow Bolt N14 N18 1.6L Engine R5X R6X - Priced Each ...

T#:515748

Part#: 07119905973

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Upgrade your MINI's engine performance with the Genuine MINI Hollow Bolt designed for N14 and N18 1.6L engines in R5X and R6X models. This hollow bolt plays a crucial role in connecting replacement lines or repairing leaks with new crush washers. Crafted to exact specifications, this genuine MINI part ensures a secure and reliable connection, enhancing the overall functionality of your engine.

Genuine MINI hollow bolt designed for N14 and N18 1.6L engines
Compatible with R5X and R6X models
Essential component for connecting replacement lines or fixing leaks
Ensures a secure and reliable connection
Crafted to exact specifications for optimal performance

Show More Show Less

Genuine MINI Stud Bolt M8X25 - 11657605340

T#:37037

Part#: 11657605340

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Upgrade your MINI's turbo system with the Genuine MINI Stud Bolt M8X25 (Part Number: 11657605340). This metal bolt features threads on both sides in different directions, providing secure attachment of the turbo to the exhaust manifold. Ensure optimal performance and durability for your MINI's turbo system with this genuine MINI stud bolt.

Genuine MINI part for precise fit and reliable performance
Designed for attaching the turbo to the exhaust manifold
Threads on both sides for secure installation
Ensures optimal performance and durability for your MINI's turbo system

Genuine MINI STUD BOLT
Fits BMW Engines including:
N14,N18

Show More Show Less

Genuine MINI Hex Nut with plate - Priced Each 11627588104

T#:394468

Part#: 11627588104

In Stock

$ 6.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6.89 USD

Add to Wish List

Qty

$ 6.89 USD

Add to Wish List

Enhance the reliability of your Mini with Genuine MINI Hex Nuts with Plate, priced each at 11627588104. Crafted to MINI's exact specifications, these authentic hex nuts with plates ensure secure fastening and structural integrity for various components of your Mini. Whether you're conducting maintenance or repairs, trust Genuine MINI parts to maintain the performance and durability of your Mini.

Genuine MINI hex nuts with plate for guaranteed quality
Crafted to MINI's exact specifications for secure fastening
Ensures structural integrity of Mini components
Enhances reliability and performance
Priced each for convenience

Show More Show Less

Pure Turbos N63 Pure Stage 1 Turbo Upgrade - BMW E70 E71 F01/02 F06/1...

T#:46444178

Part#: N63STG1KT

In Stock

$ 3,426.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,300.00 USD

Add to Wish List

Qty

$ 3,300.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers its Stage 1 turbo upgrade package for those looking to reliably increase power to 650+whp with supporting modifications.

Show More Show Less

Pure Turbos S55 PURE1000 Turbo Upgrade - BMW F8X M2/M3/M4 S55 3.0L ...

T#:46444169

Part#: S55PURE1000

Ships in 4 Business Days

$ 4,663.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,663.00 USD

Add to Wish List

Qty

$ 4,663.00 USD

Add to Wish List

The factory turbochargers found on the S55 engine are reliable and great for daily drivers, but tend to fall short for those looking to make greater power or plan on regularly tracking their M car. Pure Turbo's PURE1000 turbocharger upgrade kit for the S55 engine is the perfect addition for anyone looking to greatly increase their BMW's power potential. With supporting modes, these turbos are more than capable of making more than 900+ wheel horsepower.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Pure Turbos N54 Stage 2 "Hi-Flow" Turbo Upgrade w/ Installation Kit -...

With upgraded, 2.0" inlet snout to alleviate inlets popping off. For use with 2.0" inlet pipes.

T#:20749230

Part#: PUREN540004INSKT

Ships in 4 Business Days

$ 4,291.99

This product was last offered at the strikethrough price on
07-14-2026

$ 4,278.00 USD

Add to Wish List

Qty

$ 4,278.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Sometimes, you just have to send it! Pure Turbos have that exact idea for their Stage 2 "Hi-Flow" turbo upgrade. Designed to make your N54 powered BMW a monster on the street or track, this kit is designed to provide you with up to 700 reliable horsepower with supporting modifications. In addition to Pure's turbo modifications, these turbos have machined inlets to alleviate issues with inlet hoses popping off. Two options are available, the stock size of 1.81" (T#578217) or this package with 2.0" oversized inlets for use with oversized pipes. Features of this Pure Turbos upgraded OEM turbocharger: Upgraded billet compressor wheel Upgraded Hi-Flow turbine wheel Bullet-nosed nuts Upgraded wastegates Machined inlet snouts (no more inlet hoses popping off) VSR balanced to better than OE tolerances Featuring a limited 1 year warranty. Price includes a $600 core charge to be refunded once we receive your rebuildable cores.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE650 Turbo Upgrade - 6-Port - A90/91 Toyo...

T#:46719142

Part#: A90P650-6P

Ships in 4 Business Days

$ 2,796.99

This product was last offered at the strikethrough price on
07-15-2026

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

The A90/A91 Toyota Supra has been a popular platform to modify thanks to its great looks and BMW B58 engine. If you are looking to add power to your Supra, a turbo upgrade is one of the first major upgrades we recommend. With simple tuning, the factory turbo can easily be "woken up", but it quickly runs out of headroom before any major gains are realized. This PURE650 Turbo Upgrade from Pure Turbos is capable of supporting 600+ wheel horsepower with supporting modifications, such as fueling and methanol injection.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE650 Turbo Upgrade - 6-Port - BMW G01/G02...

T#:46650424

Part#: G2B58PURE650NEW

Ships in 4 Business Days

$ 2,796.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,695.00 USD

Add to Wish List

Qty

$ 2,695.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE650 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 600+ wheel horsepower!

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE800 Turbo Upgrade - 6-Port - A90/91 Toyo...

T#:46719144

Part#: A90P800-6P

Ships in 4 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-15-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

The A90/A91 Toyota Supra has been a popular platform to modify thanks to its great looks and BMW B58 engine. If you are looking to add power to your Supra, a turbo upgrade is one of the first major upgrades we recommend. With simple tuning, the factory turbo can easily be "woken up", but it quickly runs out of headroom before any major gains are realized. This PURE800 Turbo Upgrade from Pure Turbos is capable of supporting 700+ wheel horsepower with supporting modifications, such as fueling and methanol injection.

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 6-Port - w/ OEM Inle...

T#:46684838

Part#: B58G2P600

Ships in 6 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-14-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

For the enthusiast looking to get more power out of their G Chassis B58, Pure Turbos has the answer with their PURE600 turbocharger upgrade. With supporting modifications, this turbo kit is capable of producing 550+ wheel horsepower!

Show More Show Less

Pure Turbos NEW B58 Gen2 PURE900 Turbo Upgrade - 6-Port - A90/91 Toyo...

T#:46719143

Part#: A90P900-6P

Ships in 4 Business Days

$ 3,626.99

This product was last offered at the strikethrough price on
07-15-2026

$ 3,626.00 USD

Add to Wish List

Qty

$ 3,626.00 USD

Add to Wish List

The A90/A91 Toyota Supra has been a popular platform to modify thanks to its great looks and BMW B58 engine. If you are looking to add power to your Supra, a turbo upgrade is one of the first major upgrades we recommend. With simple tuning, the factory turbo can easily be "woken up", but it quickly runs out of headroom before any major gains are realized. This PURE900 Turbo Upgrade from Pure Turbos is capable of supporting 800+ wheel horsepower with supporting modifications, such as fueling and methanol injection.

Show More Show Less

Pure Turbos N63 Pure Stage 2 Turbo Upgrade - BMW E70 E71 F01/02 F06/1...

T#:46478564

Part#: N63STG2KT

Ships in 4 Business Days

$ 4,977.99

This product was last offered at the strikethrough price on
07-13-2026

$ 4,795.00 USD

Add to Wish List

Qty

$ 4,795.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. When it comes to the N63, it is hard to hate a twin-turbo V8. That being said, there is always room for more power! The stock turbos are quickly maxed out and aren't quite up to the task of generating large amounts of power reliably. To solve this, Pure Turbos offers their Stage 2 turbo upgrade package for those looking to reliably increase power to 850+ whp with supporting modifications.

Show More Show Less

Genuine MINI Bracket, Coolant Hose - 11537568433

T#:36045

Part#: 11537568433

Ships in 1 day

10% off MSRP $ 20.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 18.99 USD

Add to Wish List

Qty

10% off MSRP

$ 20.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 18.99 USD

Add to Wish List

Genuine MINI BRACKET, COOLANT HOSE
Fits BMW Engines including:
N14

OIL RETURN LINE

T#:38195385

Part#: 11428629970

Ships in 1 day

6% off MSRP $ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD

Add to Wish List

Qty

6% off MSRP

$ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD

Add to Wish List

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

T#:53255639

Part#: B58G2P600N-2P

Ships in 4 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-15-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The Pure Turbos NEW Pure600 for the BMW B58 (Gen 2) is a precision-engineered turbo upgrade designed specifically for 2-port cylinder head applications, offering a substantial boost in performance without the need for a core exchange. This unit features a custom aftermarket inlet housing similar to the OEM design for a true plug-and-play installation, integrating seamlessly with your factory turbine manifold. Internally, the Pure600 is equipped with an upgraded billet compressor wheel and a high-flow turbine wheel, both optimized to increase exhaust efficiency and support power levels exceeding 550 wheel horsepower, depending on your supporting modifications and fuel type. Durability and reliability are central to this turbocharger’s design, which includes an upgraded bearing housing to withstand the increased stresses of high-load performance. To ensure smooth, long-term operation, every unit is VSR high-speed balanced to exacting standards. While the Pure600 can run on stock tunes or off-the-shelf maps, custom tuning is highly recommended to fully unlock its potential. This upgrade provides a streamlined path to elite B58 performance, combining robust engineering with a straightforward installation process that retains the refined drivability of your BMW.

Show More Show Less

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less