Turbos

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

T#:9416039

Part#: B58GCMID2-4-INS

Ships in 10 Business Days

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT

Show More Show Less

N20 Stage 1 Turbocharger upgrade - New

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

MAC Single Turbo Boost Solenoid - N54 N55

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

N20 Stage 1 Turbocharger upgrade - New

N54 Single Turbo Conversion Oil Fitting

Turbo & Intake Heat Shield - Gen2 B58

Turbo & Intake Heat Shield - Gen1 B58

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results