Turbos

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

MINI R56 Forge Motorsport Turbo Blanket

T#:589672

Part#: FMTUBL4

In Stock

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

**The turbo blanket can change color hue due to production batches ** It has not been installed or run prior. The Forge Motorsport FMTUBL4 has been specifically designed for the MINI R55-R61 Cooper S/JCW stock turbo charger. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The stock MINI heat shield is inadequate and can result in warping the standard air scoop located in the bonnet. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500 °f of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket. It can also change color due to heat cycles.

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

T#:32118904

Part#: EVE-X56M-CHG

Ships in 3 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M Pre-LCI F96 X6M Pre-LCI G09 XM Pre-LCI G05 X5 M60i Pre-LCI G06 X6 M60i Pre-LCI G07 X7 M60i Pre-LCI ** This item is not eligible for return **

Show More Show Less

Manual Boost Controller - Black

T#:22756715

Part#: FMICB051

In Stock

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Forge presents a high-quality in-car boost controller, designed to cater to enthusiasts looking to precisely adjust their boost levels from within the comfort of their vehicle. This controller is suitable for use with any turbocharged vehicle equipped with either an internal or external wastegate, provided it operates using vacuum/boost control. Please note that this product includes the controller valve only and does not include lines or connections.

Show More Show Less

MINI Cooper S Intercooler Resonator Delete Hose - Black

T#:23449715

Part#: FMR56RDH

Back Ordered

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Elevate your 2007 onwards MINI Cooper S with the Intercooler Resonator delete hose, expertly crafted to replace the OEM hoses and sound resonator. Forge's innovative design enhances torque and horsepower, offering a smoother bore to reduce resistance. When combined with additional modifications such as tuned software or exhaust upgrades, this hose delivers enhanced acceleration. Choose from red, blue, or black options for a durable, stealthy installation capable of withstanding high temperatures and pressures.

Show More Show Less

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships in 4 Business Days

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Boost Hose - E90 335D

T#:384539

Part#: FMBH335D

Special Order: No Guaranteed ETA

$ 223.99 USD

Add to Wish List

Qty

$ 223.99 USD

Add to Wish List

Because of where the stock boost hose is located - often leaks go unnoticed. Replace your stock hose that is prone to failure with this 4ply Fluorosilicone hose that is better suited to handle the pressures, temperatures, and withstand total failure caused by oil. Couplers are CNC machined. Following instructions is necessary - if installed incorrectly, the hose will seem too short for its application.

This product fits the following BMWs:
2006-2012 E90 335d

Show More Show Less

Manual Boost Controller - Black

T#:31622619

Part#: FMBV050

Ships in 4 Business Days

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

Manual Boost Controller-Polished

T#:27638804

Part#: FMICB051 POLISH

Ships in 6 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

T#:32118905

Part#: EVE-X56M-LCI-CHG

Ships in 6 Business Days

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M LCI F96 X6M LCI G09 XM LCI G05 X5 M60i LCI G06 X6 M60i LCI G07 X7 M60i LCI ** This item is not eligible for return **

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Forge Motorsport B58 Charge Pipes - B58 A90, G20, G29

T#:587951

Part#: FMBP5

Ships in 4 Business Days

$ 376.99 USD

Add to Wish List

Qty

$ 376.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

MAC Single Turbo Boost Solenoid - N54 N55

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

MINI R56 Forge Motorsport Turbo Blanket

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 Pre-LCI ...

Manual Boost Controller - Black

MINI Cooper S Intercooler Resonator Delete Hose - Black

Forge B58 Charge Pipe Set - All B58

N54 Single Turbo Conversion Oil Fitting

Boost Hose - E90 335D

Manual Boost Controller - Black

Manual Boost Controller-Polished

Turbo & Intake Heat Shield - Gen2 B58

Eventuri Carbon Turbo Inlet Set - F95/96 G09 G05 G06 G07 LCI ...

Turbo & Intake Heat Shield - Gen1 B58

Forge Motorsport B58 Charge Pipes - B58 A90, G20, G29

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Narrow Results