Turbos

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

6 Port Turbo Heat Shield Kit - Black - BMW B58 Engine

T#:27405485

Part#: A0411A-BLK

Ships on Sep 11, 2026

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

The Verus Engineering 6 Port Turbo Heat Shield is perfect for keeping heat around the turbo area and freeing up engine bay space. If running an aftermarket intake; it is a great addition to reduce heat soak as well. Removing the factory resonator and heat shield greatly improves engine bay aesthetics and available room. The heatshield is produced from 2.0mm thick stainless steel sheet metal which is CNC laser cut, CNC bent, and then finished in high-temp Cerakote. The heat shield was designed off scan data obtained internally for an OE-like fit. Utilizing our unit, you can expect a better-looking engine bay, better thermal properties, and less heat soak. FEATURES Excellent Coverage of Turbine and Manifold Area Improved Engine Bay Aesthetics Thick 2.0mm Stainless Construction Improved Heat Rejection Characteristics Simple Bolt-On Install SPECIFICATIONS 2.0mm Thick 304 Stainless Sheet CNC Laser Cut CNC Press Break Formed Cerakote High-Temp Coated Stainless Hardware INCLUDED Cerakote Coated Stainless Heat Shield Main Cover Cerakote Coated Stainless Heat Shield Side Cover Hardware Kit, Includes All Hardware Necessary for Install

Show More Show Less

BMW S55 Upgrade Turbocharger Set, MSL65-80

Available for the BMW F8x (M2 Competition, M3 and M4)

T#:12872412

Part#: 10210019

In Stock

2% off MSRP $ 5,098.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,978.00 USD

Add to Wish List

Qty

2% off MSRP

$ 5,098.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 4,978.00 USD

Add to Wish List

Mosselman BMW S55 Upgrade Turbocharger Set, MSL65-80 (~ 650-800hp)

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

T#:38655170

Part#: BMS-BOVA-G3B58

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT B58 GC-MID 2-Port Turbocharger Upgrade W/ 4" Connector & Install ...

T#:9416039

Part#: B58GCMID2-4-INS

Ships in 10 Business Days

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Ready to take your B58 to the next level? Don’t want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting B58 “GC” “GC-MID” and “GC+” turbocharger upgrade. VTT starts by keeping the great design elements of the factory B58 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else that could be improved upon. With the basics covered, VTT stepped it up a level adding in proprietary VTT changes and finished off by having all these parts cast to OE quality. What this means for you is serious B58 power made easy; GC’s are a drop-in B58 turbocharger upgrade that supports over 600WHP while maintaining factory spool and all factory connections including oil, water, downpipe, and charge pipe. NOTE: A tune is highly recommended to get the best performance out of this upgrade. Key Design Elements: All new castings with factory restrictions removed. No oversized wheels stuffed into factory housings here! GC is cold side and bearing housing only, GC+ is a complete unit Full 3' turbocharger inlet size with an included 3-4' silicone inlet elbow that removes ALL factory inlet restrictions 9 blade Mar-M 246 turbine wheel with the latest aero technology for increased flow while maximizing spool 9 blade “point-milled” compressor wheels with the latest aero technology to maximize flow while virtually eliminating surge Direct connection to ALL factory lines including oil, water, downpipe, and factory charge pipe Redesigned, and improved internal components including bearing housing oiling, and an upgraded thrust bearing NO CORE CHARGES. The new unit is sold to you outright. Keep your old unit in case you ever want to go back to stock. Or sell it to recoup your investment -it’s up to you! No long lead times; once fully released production units will be on the shelf for same to next day shipping (please inquire about stock levels when ordering) Full 12-month unlimited mileage/No Hassle Warranty. If you have an issue we will replace the unit no questions asked Turbocharger Purchase includes: 1 – VTT B58 “GC” turbocharger 1 – VTT B58 “GC” 3'-4' Silicone inlet elbow with adapters for factory connections 1 – 3' hose clamp for silicone inlet elbow 1 – 4' connector for inlet elbow for use with different intakes (if you are not sure you need this, order it just in case) 1 – Turbo Installation Kit from VTT

Show More Show Less

Gen 2 Turbo Heat Shield Replacement Hardware Kit | New Style Heat Shi...

T#:36303307

Part#: 90-1077

In Stock at Vendor

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

N20 Stage 1 Turbocharger upgrade - New

T#:28770031

Part#: VTT-N20-STG1-NEW

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

WHP Level supported (with proper fuel, upgrades, and tuning) Stock – 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. Replace that old worn out N20 turbocharger with the latest and greatest technology from Vargas Turbo Technologies!

Show More Show Less

N55 (3.0T) 535i/640i Lower Intercooler Charge Pipe

T#:26038601

Part#: BM-ICP009LIC

Special Order: No Guaranteed ETA

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Mosselman BMW S58 Upgrade Turbocharger Set, MSL75-95

T#:12872415

Part#: 10210020

Ships in 6 Business Days

$ 5,378.00 USD

Add to Wish List

Qty

$ 5,378.00 USD

Add to Wish List

This Mossleman upgraded turbocharger will bring reliable high performance to your S58 engine! Depending on modifications done to the vehicle, this turbo can deliver up to 950hp!

Turbo Oil Feed Line

T#:13463755

Part#: TURBOFL

Ships on Sep 1, 2026

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Rally Road has created the perfect turbo oil feed line specifically made for the M50 series motor with top mount turbo manifold. This line is braided stainless steel on the outside and Teflon on the inside for maximum rigidity .

Show More Show Less

Vanos Banjo Oil Supply Fitting

T#:13463756

Part#: VANOSBOSF1

Ships on Sep 9, 2026

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The easiest way to supply your turbo or supercharger with oil!

N55 Big Turbo Upgrade - F2X / F3X / F87 M2

Call In Or Chat For Best Price!
CARB certified for sale in all 50 states

T#:15544960

Part#: D310-0110A

EO#: D-176-52

Back Ordered

Sale - Save 14% $ 1,980.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,709.96 USD

Add to Wish List

Qty

Sale - Save 14%

$ 1,980.99

This product was last offered at the strikethrough price on
06-24-2026

$ 1,709.96 USD

Add to Wish List

Elevate Turbocharger Performance with Upgraded Kit

Upgrade your turbocharger's performance with this kit, presenting an impressive 30% increase in the compressor wheel size within the stock turbocharger housing. Experience a significant power boost by elevating pressure at high RPMs while maintaining efficient operation. The enhanced thrust system ensures prolonged turbocharger life, and for optimized performance, consider pairing it with Stage 4 Dinan software to manage the additional boost.

Key Features:

Increases compressor size by 30%
Boosts power through increased boost pressure
Upgraded thrust system for turbocharger longevity
DINANTRONICS Stage 4 software recommended for optimal engine performance
Earns 2 points towards your Dinan badge

With over 35 years of expertise, Dinan leads BMW tuning advancements, prioritizing balanced enhancements that preserve the original driving feel. Backed by a four-year, 50,000-mile warranty, Dinan parts undergo rigorous testing, ensuring reliability. Upon significant part installation, enthusiasts receive an exclusive trunk badge, signifying the transition to Dinan performance.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Mosselman Stage 2 Turbo Upgrade - BMW N20 2.0L (With PWG)

T#:44359934

Part#: 010210013

In Stock

Sale - Save 5% $ 2,518.00

This product was last offered at the strikethrough price on
05-03-2026

$ 2,392.10 USD

Add to Wish List

Qty

Sale - Save 5%

$ 2,518.00

This product was last offered at the strikethrough price on
05-03-2026

$ 2,392.10 USD

Add to Wish List

The Mosselman Upgrade Turbocharger (MSL38-50) for the N20 PWG engine increases performance levels with proven reliability. Depending on the modifications done to the car and fuel type, this turbo set can deliver up to 500hp!

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Silver 6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra ...

T#:42099847

Part#: A0289A-SLV

Ships in 3 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Verus Engineering Turbo Heat Shield – 6-Port | 2021+ Toyota GR Supra (A90/A91) Engineered for performance and built to endure, the Verus Engineering Turbo Heat Shield is a must-have upgrade for the 6-port 2021+ Toyota GR Supra. Designed to improve thermal efficiency and engine bay airflow, this shield helps reduce heat soak—especially critical when running an aftermarket intake setup. Constructed from 2.0mm thick stainless steel, each piece is laser cut and precision CNC bent for consistent fit and finish. Finished in a high-temperature Cerakote coating, the shield is built to withstand extreme conditions while delivering a clean, motorsport-inspired look. Developed using in-house scan data, the shield ensures OEM-like fitment without compromise. By removing the restrictive factory resonator and OEM turbo heat shield, the Verus unit opens up the engine bay, enhances service access, and significantly improves the visual appeal of your turbo setup. Compatible with the popular Pure800 Turbo Upgrade, this component is ideal for high-performance builds and daily drivers alike. Highlights: 2.0mm stainless steel construction for strength and durability High-temp Cerakote coating for maximum thermal resistance Reduces heat soak and improves intake air temperatures Eliminates factory turbo resonator and bulky heat shield Improves engine bay space and appearance Direct-fit design using in-house scan data for precise fitment Fully compatible with Pure800 Turbo Upgrade Take control of your Supra’s heat management and elevate both form and function under the hood with this high-quality thermal solution from Verus Engineering.

Show More Show Less

Mosselman BMW N55 PWG Upgrade Turbocharger, MSL48-60

For vehicles with Pneumatic Wastegate

T#:12872411

Part#: 10201016

Ships in 6 Business Days

$ 3,239.00 USD

Add to Wish List

Qty

$ 3,239.00 USD

Add to Wish List

This Mossleman upgraded turbocharger will bring reliable high performance to your N55 PWG engine! Depending on modifications done to the vehicle, this turbo can deliver up to 600hp!

Mosselman BMW N54 Upgrade Turbocharger Set, MSL50-65

T#:12872407

Part#: 10210017

Ships in 6 Business Days

$ 3,719.00 USD

Add to Wish List

Qty

$ 3,719.00 USD

Add to Wish List

This plug and play turbocharger set from Mosselman is precision made to boost your power reliably for your N54 engine. Depending on the modifications done to the car, you could see up to 650hp!

Mosselman BMW N55 EWG Upgrade Turbocharger, MSL48-60

For vehicles with Electronic Wastegate

T#:12872410

Part#: 10210014

Ships in 6 Business Days

$ 3,524.99 USD

Add to Wish List

Qty

$ 3,524.99 USD

Add to Wish List

This Mossleman upgraded turbocharger will bring reliable high performance to your N55 EWG engine! Depending on modifications done to the vehicle, this turbo can deliver up to 600hp!

Mosselman BMW N54 Upgrade Turbocharger Set, MSL50-65, 1 SERIES/RHD ...

For RHD vehicles

T#:12872408

Part#: 10210018

Ships in 6 Business Days

$ 3,719.00 USD

Add to Wish List

Qty

$ 3,719.00 USD

Add to Wish List

This plug and play turbocharger set from Mosselman is precision made to boost your power reliably for your N54 engine. Depending on the modifications done to the car, you could see up to 650hp!

E36 Turbo Motor Mount

T#:13727064

Part#: E36BMWTMM

Ships on Sep 1, 2026

$ 134.99 USD

Add to Wish List

Qty

$ 134.99 USD

Add to Wish List

Rally Road has created the perfect turbo mount alternative for different turbo configurations.

E46 M3 BMW Turbo Motor Mount

T#:13463751

Part#: E36TURBOMTMNT

Ships on Sep 1, 2026

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Rally Road has created the perfect turbo mount alternative for different turbo configurations. With an added 20mm+ of clearance, that extra space can be vital for a bigger turbo inlet pipe!

6 Port Turbo Heat Shield Kit - 2021+ Mk5 Toyota Supra

T#:42099845

Part#: A0289A-BLK

Back Ordered

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Verus Engineering Turbo Heat Shield – 6-Port | 2021+ Toyota GR Supra (A90/A91) Engineered for performance and built to endure, the Verus Engineering Turbo Heat Shield is a must-have upgrade for the 6-port 2021+ Toyota GR Supra. Designed to improve thermal efficiency and engine bay airflow, this shield helps reduce heat soak—especially critical when running an aftermarket intake setup. Constructed from 2.0mm thick stainless steel, each piece is laser cut and precision CNC bent for consistent fit and finish. Finished in a high-temperature Cerakote coating, the shield is built to withstand extreme conditions while delivering a clean, motorsport-inspired look. Developed using in-house scan data, the shield ensures OEM-like fitment without compromise. By removing the restrictive factory resonator and OEM turbo heat shield, the Verus unit opens up the engine bay, enhances service access, and significantly improves the visual appeal of your turbo setup. Compatible with the popular Pure800 Turbo Upgrade, this component is ideal for high-performance builds and daily drivers alike. Highlights: 2.0mm stainless steel construction for strength and durability High-temp Cerakote coating for maximum thermal resistance Reduces heat soak and improves intake air temperatures Eliminates factory turbo resonator and bulky heat shield Improves engine bay space and appearance Direct-fit design using in-house scan data for precise fitment Fully compatible with Pure800 Turbo Upgrade Take control of your Supra’s heat management and elevate both form and function under the hood with this high-quality thermal solution from Verus Engineering.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Elevate Turbocharger Performance with Upgraded Kit

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results