BMW Fuel System Parts

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel Injector Replacement Kit

T#:15744008

Part#: 13538627842-KT

In Stock

Sale - Save 26% $ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD

Add to Wish List

Qty

Sale - Save 26%

$ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD

Add to Wish List

Replace your old injectors! Includes a full set of Bosch injectors, and decoupling elements.

Fuel Injector Replacement Kit - N52

T#:53044116

Part#: 13537531634RKT2

In Stock

Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Qty

Sale - Save 22%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

High Pressure Fuel Pump Kit

T#:15677496

Part#: 13537622231-KT

In Stock

Sale - Save 8% $ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 641.67 USD

Add to Wish List

Qty

Sale - Save 8%

$ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 641.67 USD

Add to Wish List

Solve your fuel delivery issues kit includes both fuel pumps and a new fuel pressure sensor and hardware.

Fuel Filter Kit - M57

T#:56291065

Part#: 13327811227KT2

In Stock

$ 55.42 USD

Add to Wish List

Qty

$ 55.42 USD

Add to Wish List

This fuel service kit pairs a high flow OEM replacement fuel filter with a fresh dampening ring and securing hex bolt. By replacing the filter and hardware together, you ensure fuel pressure stability

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Fuel pump and level sensor kit

T#:56471664

Part#: 16116768788KT2

Ships in 2 Business Days

$ 664.00 USD

Add to Wish List

Qty

$ 664.00 USD

Add to Wish List

This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.

Show More Show Less

Fuel Injector Installation Kit

T#:56507874

Part#: 13537577649KT2

Ships in 3 Business Days

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

Fuel Pump Kit - E46

T#:56291046

Part#: 16142229684KT2

Ships in 1-2 days

$ 535.01 USD

Add to Wish List

Qty

$ 535.01 USD

Add to Wish List

A tired fuel pump or a restricted fuel filter can cause dangerous lean spikes under full throttle putting your high strung M engine at risk. The BMW E46 M3 saddle tank relies heavily on both a primary pump and an auxiliary transfer pump to keep fuel moving efficiently across the tank arch during cornering.

Show More Show Less

Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...

Upgrade Your Low-Pressure Fueling System With this All-Inclusive Kit!

T#:25606665

Part#: N5XFUEL

Back Ordered

Sale - Save 3% $ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.80 USD

Add to Wish List

Sale - Save 3%

$ 1,254.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,213.80 USD

Add to Wish List

Introducing the comprehensive N54/N55 Low-Pressure Fueling Solution! With Radium Engineering's Regulated Fuel Hanger Surge Tank at its core, this kit allows you to tailor your fuel pump setup, select an in-line fuel filter, and opt for a wiring kit for multiple LPFP configurations in your N54 or N55-powered E9X 335i. In this setup, the BMW fuel pump serves as a "lift" pump, maintaining fuel volume in the Fuel Hanger Surge Tank via a dedicated orifice. This guarantees sufficient pressure for the venturi jet pump(s) to operate, ensuring consistent fuel delivery. Excess fuel in the FHST cycles back to the OEM tank through a one-way check valve ensuring a steady fuel supply. Unlike conventional surge tanks, which rely on pump flow matching, this FHST employs additional mechanisms to continuously deliver fuel regardless of fluctuations in other fuel sources. When the main tank nears depletion, the lift pump and Fuel Pressure Regulator step in to supply fuel to the FHST. Furthermore, with a boost reference signal (Hobbs Switch), the Fuel Pressure Regulator operates at a 1:1 ratio, allowing fuel pressure to rise proportionally with boost pressure. The low-pressure fuel returning from the Fuel Pressure Regulator is routed back into the surge tank to maintain its fullness. Inside the canister, a 6-hole diverter ensures even fuel dispersion without air bubbles or foaming. The stainless electrical studs included effectively handle high current demands, surpassing the capabilities of compact bulkhead connectors. These resilient connections are sealed against all standard and exotic fuels, with non-conductive acorn nuts provided to prevent accidental short circuits. The kit also includes the necessary electrical hardware for one Walbro fuel pump and the OEM level sender, while the in-tank wiring is insulated with premium chemically resistant ETFE for enhanced durability. If you are planning on running more than one LPFP, you will need to select the Hobbs Switch option for boost reference (to be installed on the manifold or charge pipe), as well as the fuel pump wiring kit! Features: -Drop-In OEM Replacement -Permits 1 or 2 Surge Pumps -1:1 Fuel Pressure Adjustments -Fuel Starvation Protection -Integrated 1-Way Fill Valve -High Current Electrical Hardware -Compatible with Various Pumps -Anodized Aluminum Construction -Gasoline and Ethanol Compliant -Anodized Aluminum 8AN Male Outlet Fitting -Anodized Aluminum Surge Tank Canister -Fuel Resistant Tubing and Wiring -Stainless Steel Hardware -Relay(s) and Fuse(s)

Show More Show Less

Fuel Filter - Inline - BMW E36 3 series, Z3

T#:52270287

Part#: 13321405092

Ships on Sep 8, 2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Protect your investment with the Hengst Premium Fuel Filter, the professional’s choice for BMW maintenance.

Upgraded Low Pressure Fuel Pump Assembly

Call In Or Chat For Best Price!

T#:14188788

Part#: R420-0002

Ships in 6 Business Days

Sale - Save 10% $ 1,449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,304.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,449.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,304.96 USD

Add to Wish List

As power output increases, the demand for low-pressure fuel pumps increases. This kit includes components to upgrade your low-pressure fuel pump to deliver consistent fuel flow regardless of the amount of fuel inside the tank while increasing tank drawing. Best of all, the modified pump can be properly controlled by the DME and will result in no fault codes. Complete modified fuel pump Increases tank draw Consistent fuel flow Works seamlessly with existing DME For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Show More Show Less

Complete Fuel Injector Set

T#:15677494

Part#: 13537528539-KT

Back Ordered

Sale - Save 3% $ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD

Add to Wish List

Qty

Sale - Save 3%

$ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 849.89 USD

Add to Wish List

A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

Fuel Injector Replacement Kit

Fuel Injector Replacement Kit - N52

High Pressure Fuel Pump Kit

Fuel Filter Kit - M57

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

Fuel pump and level sensor kit

Fuel Injector Installation Kit

Fuel Pump Kit - E46

Radium Fuel Hanger Surge Tank Complete Kit - For Walbro Pumps ...

Fuel Filter - Inline - BMW E36 3 series, Z3

Upgraded Low Pressure Fuel Pump Assembly

Complete Fuel Injector Set

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results