Shifter Upgrades and Components

BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.

• Improved Performance: Upgrades the factory clutch fork pivot pin to deliver a more precise and responsive clutch operation.
• Enhanced Reliability: Built to withstand the demands of both daily driving and spirited driving, offering greater durability over OEM components.
• Quality Construction: Made from high-quality materials to ensure long-lasting performance and resistance to wear and tear.
• Direct Fit: Designed specifically for BMW E36 and E46 models, ensuring a perfect fit with no modifications required.
• Enhanced Driving Experience: Reduces clutch play and enhances engagement feel, contributing to a more engaging driving experience.

Installation Note: Designed for street use and compatible with standard clutch systems.

Over time, factory rubber bushings and plastic components break down, leaving your shifter feeling loose, vague, and disconnected. That lack of precision doesn’t just dull the driving experience—it takes away from the performance BMWs are known for. If your G8X shifter isn’t delivering the crisp engagement you expect, we've developed an all-inclusive fix.

The Ultimate G8X Shifter Rebuild & Upgrade Kit has been expertly crafted by our team of BMW enthusiasts to bring back the sharp, direct shifting feel your BMW deserves. This all-in-one kit combines high-performance upgrades with refreshed OEM hardware, offering a complete overhaul for your shifting system:

Turner Motorsport G8X Dual-Shear Selector Rod (DSSR)

Dual-contact design delivers smoother, more accurate gear changes compared to the OEM single-sided rod

Precision-machined from 6061-T6 billet aluminum for strength and durability

Includes custom-fit shims and connecting pins for easy installation

Maintains factory 232mm length, ensuring there is no change to the factory shift knob position

Replaces OEM Part #: 25118097173

Turner Motorsport G8X Polyurethane Rear Shifter Bushing

Ditch the soft factory rubber! This polyurethane upgrade reduces play and sharpens feedback

CNC-machined aluminum housing with 70A high-durometer polyurethane insert

Corrosion-resistant Type II anodized finish

Replaces OEM Part #: 25118623459

ECS Teflon Shifter Bushing Kit

Replaces the front rubber bushing with low-friction, long-lasting Teflon

Reduces side-to-side play in the shifter carrier

Includes new carrier pins for a complete install

Replaces OEM Part #: 25117507695

Also included are essential Genuine and OE components to ensure a full-service refresh:

BMW Shifter Rod Joint – 25117580281

Vaico Circlips (Qty 2) – 25117571899

Bremmen Shifter Ball Bushing – 25111220600

Experience precision like never before—upgrade your shifting experience today with the Ultimate Shifter Rebuild & Upgrade Kit.

Complete your Getrag 420G six-speed manual swap with a comprehensive shifter solution engineered for precision and durability. This all-in-one kit features our double-adjustable short shifter, dual-shear selector rod, heavy-duty shifter arm, upgraded bushings, and all required installation hardware for crisp gear engagement, reduced shifter slop, and confidence-inspiring performance you'll feel with every shift!

TURNER MOTORSPORT DOUBLE ADJUSTABLE SHORT SHIFT KIT

BMWs have historically been plagued by very long throw shifters from the factory - luckily, we've developed the solution. Our short shifter system is height- and throw-adjustable, offering up to a 52% reduction in throw over stock. Double adjustability enables you to find the sweet spot that will make you excited to drive your car again. Installation of this kit is also of the easiest to tackle. Compared to the competition, a custom bearing cup allows for easy installation from inside the car (on applications that use the stock shifter arm).

Benefits:

Adjustable between a conservative short throw to ultra short throw Ultra crisp shifter feel - quicker, more precise shifts More engaging driving experience Adjustability:

Independently adjustable knob height 22mm adjustment range to fine-tune shifter throw and feel. Note: knob height also affects throw reduction to some degree Independently adjustable shifter throw Adjustable by raising and lowering the lower lever position relative to the pivot ball. Note: ball position also affects knob height by ~10mm range Combined total throw adjustment range ​32 to 52 % reduction in throw over stock E36 shifter. A throw adjustment can be done in the car without removing the shifter DSSR (109MM) - E36 420G

Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our DSSR is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.

Features:

Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) HEAVY-DUTY SHIFTER ARM - E36 420G

To cater to the six-speed swap E36 community, we designed a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, this replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and Turner Motorsport Double-Adjustable Short Throw Shifter Kit.

Features:

6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components POLYURETHANE SHIFTER ARM BUSHING

This shifter bushing is designed to remove the shifter play caused by an old, failed rubber shifter bushing. Manufacturing the bushing from polyurethane instead of rubber reduces the amount of stretch caused by the moving part through the bushing. This maintains the direct crisp feel from your shifter assembly. When your OE shifter arm bushing begins to fail, you will notice slop in shifting, potentially making it easier to miss gears, and it often causes an obvious vibration and movement from the engine RPMs.

Features:

Corrosion-resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane Stiffer bushing results in a crisper shifter feel and a more engaging driving experience. Ready to install out of the box - no modifications required Replaces Genuine BMW part numbers 25111222015 and 25111222652 Improved durability over OEM rubber Made in America Check out the "KIT CONTENTS" tab for a detailed list of everything included in this kit!