Find Parts That Fit Your Vehicle

Home
Drivetrain
Drivetrain Mounts and Upgrades

Drivetrain Mounts and Upgrades

From the factory, engine and transmission mounts are rubber and thus a wear component. Worn out engine or transmission mounts create sloppiness and a disconnect between the driver and your BMW's powerplant. If your vehicle is purpose built for the track, we recommend solid engine and transmission mounts. These have zero deflection, but come at the expense of added NVH (noise, vibration, and harshness). Poly engine and transmission mounts offer a good balance between OEM rubber and solid mounts for those with mixed purpose vehicles, offering great performance and connection with little sacrifice in terms of NVH.

Sub-Categories

Sort By:

F9X X3/4M Billet Diff Lock Down Kit

T#:26404860

Part#: VTT-F9X-LDK

Back Ordered

Starting at $ 314.99 USD

Add to Wish List

Starting at $ 314.99 USD

Add to Wish List

VTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 differential bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Show More Show Less

Lower Engine Mount - W10 W11 1.6L Engine

T#:23615473

Part#: TS-MC-R53

Back Ordered

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

Upgrade your Mini Cooper's performance with the durable and reliable Torque Solution Lower Engine Mount. Crafted from high-grade 6061 billet aluminum, this mount is designed to withstand rigorous conditions and deliver exceptional performance. Its polyurethane inserts, along with steel machined pins, ensure not just an aesthetically pleasing mount but also optimal functionality. Trusted by some of the fastest MINIs worldwide, this mount eliminates wheel hop and traction loss, enhancing 60fts/e.t's for both street and track applications. Backed by Torque Solution's Limited Lifetime Warranty, this mount guarantees long-lasting durability and reliability.

Eliminates wheel hop and traction loss
Improves 60fts and e.t's for enhanced performance
Constructed from lightweight 6061-T6 billet aluminum
Street and track torture tested for durability
Features black anodized finish and Torque Solution Laser engraving
Equipped with 75A durometer bushings
Backed by a Limited Lifetime Warranty for peace of mind

Show More Show Less

Billet Diff Lock Down Kit

T#:21176906

Part#: VTT-A9X-DLD

In Stock

Sale - Save 7% $ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

Sale - Save 7%

$ 313.99

This product was last offered at the strikethrough price on
05-04-2026

Starting at $ 291.99 USD

Add to Wish List

VTT noticed a hole in the A9X/Z4 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. Vargas went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced. You will need a Riv-nut tool to install the Riv-nuts as one is not included. Features: Lightweight 1.5 lbs for the entire lockdown plate Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc 100% Billet construction from 6061-T6 aluminum Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks The subframe does NOT have to be removed for installation Uses all 12.9 grade hardware Does not add excessive NVH Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.

Project Cars

SELECT YOUR BMW

Drivetrain Mounts and Upgrades

Sub-Categories

F9X X3/4M Billet Diff Lock Down Kit

Lower Engine Mount - W10 W11 1.6L Engine

Billet Diff Lock Down Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results