Find Parts That Fit Your Vehicle

Drivetrain Mounts and Upgrades

From the factory, engine and transmission mounts are rubber and thus a wear component. Worn out engine or transmission mounts create sloppiness and a disconnect between the driver and your BMW's powerplant. If your vehicle is purpose built for the track, we recommend solid engine and transmission mounts. These have zero deflection, but come at the expense of added NVH (noise, vibration, and harshness). Poly engine and transmission mounts offer a good balance between OEM rubber and solid mounts for those with mixed purpose vehicles, offering great performance and connection with little sacrifice in terms of NVH.

Sub-Categories

Sort By:
Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti, Z3
Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...
Condor Speed Shop - Corporate Logo
T#:578193
Part#: DIFSTKT-1
In Stock
$ 32.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 32.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts
Show More Show Less
Condor Speed Shop G260 Transmission Brace for 24v Swaps - E30 BMW
Condor Speed Shop G260 Transmission Brace for 24v Swaps - E30 BMW ...
Condor Speed Shop - Corporate Logo
T#:577863
Part#: G260TBRACE
Ships in 2 Business Days
$ 75.00 USD
Free Shipping
Add to Wish List
$ 75.00 USD
Free Shipping
Add to Wish List
Ultra-light aluminum G260 transmission brace for 24V engine swaps. This brace must be used if swapping a 24v motor into an e30, with the original G260 transmission. *Please note you will need to bend/twist the selector rod to get your shift lever in the correct orientation.
Show More Show Less
Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW
Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...
Burger Motorsports - Corporate Logo
T#:637547
Part#: BMS-DSBB-F
Back Ordered
Starting at $ 129.00 USD
Free Shipping
Add to Wish List
Starting at $ 129.00 USD
Free Shipping
Add to Wish List
The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.
Show More Show Less
BMW E9X 335i BMS Differential Support Bracket Brace - Small Case
BMW E9X 335i BMS Differential Support Bracket Brace - Small Case ...
Burger Motorsports - Corporate Logo
T#:1316770
Part#: E9XDIFFBRACE-SM
Back Ordered
$ 99.00 USD
Free Shipping
Add to Wish List
$ 99.00 USD
Free Shipping
Add to Wish List

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case

The BMW E9X 335i BMS Differential Support Bracket Brace - Small Case is a high-performance upgrade designed to enhance the stability and durability of the differential mount. Turner Motorsport offers this precision-engineered brace to reduce flex and movement of the differential, ensuring improved power transfer and handling. Ideal for high-performance driving or track use, this brace helps maintain proper alignment and extends the lifespan of your differential components.

Benefits:

  • Enhances differential stability by reducing flex and movement
  • Improves power transfer and handling performance
  • Precision-engineered for a perfect fit and reliable performance
  • Ideal for high-performance driving and track use
  • Extends the lifespan of differential components
  • Made from high-quality materials for durability and strength
Show More Show Less
Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmission Mount Set - E30 BMW
Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...
Condor Speed Shop - Corporate Logo
T#:577564
Part#: S14M+T
Ships in 4 Business Days
$ 80.00 USD
Free Shipping
Add to Wish List
$ 80.00 USD
Free Shipping
Add to Wish List
These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. This kit includes Solid Transmission Mounts as well for fully solid powertrain mounting!
Show More Show Less
Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mounts - E30 w/ M20
Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...
Condor Speed Shop - Corporate Logo
T#:577859
Part#: M20M_TRANS
Ships in 4 Business Days
$ 79.00 USD
Free Shipping
Add to Wish List
$ 79.00 USD
Free Shipping
Add to Wish List
Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E30. These solid UHMW motor mounts are a direct replacement for your original 1984-1991 E30 BMW 323, 325e 325es 325i 325ic 325is' OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well!
Show More Show Less
Condor Speed Shop Solid Engine & Transmission Mount Set - E34 525i
Condor Speed Shop Solid Engine & Transmission Mount Set - E34 525i ...
For Vehicles With Manual Transmission
Condor Speed Shop - Corporate Logo
T#:577960
Part#: E34M_TRANS
Ships in 2 Business Days
$ 139.00 USD
Free Shipping
Add to Wish List
$ 139.00 USD
Free Shipping
Add to Wish List
Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E34. These solid UHMW motor mounts are a direct replacement for your original E34 525i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes transmission mounts.
Show More Show Less
Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1602
Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...
Condor Speed Shop - Corporate Logo
T#:577575
Part#: PLYE10TRANS
Ships in 3 Business Days
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30
Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30
Condor Speed Shop - Corporate Logo
T#:577565
Part#: S14M
Ships in 2 Business Days
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD
Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...
Condor Speed Shop - Corporate Logo
T#:597365
Part#: TRANSIX_F2XF3X
In Stock at Vendor
$ 34.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.
Show More Show Less
Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10
Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...
Condor Speed Shop - Corporate Logo
T#:577966
Part#: E30_M10M_TRANS
In Stock at Vendor
$ 115.00 USD
Free Shipping
Add to Wish List
$ 115.00 USD
Free Shipping
Add to Wish List
These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well.
Show More Show Less
Condor Speed Shop Solid Motor & Transmission Mount Set - E34 535i w/ M30
Condor Speed Shop Solid Motor & Transmission Mount Set - E34 535i w/ ...
Condor Speed Shop - Corporate Logo
T#:577962
Part#: E34M30_TRANS
Ships in 3 Business Days
$ 139.99 USD
Free Shipping
Add to Wish List
$ 139.99 USD
Free Shipping
Add to Wish List
Solid UHMW 535i engine mounts for your m30 powered E34. Under hard braking the stock mounts allow the engine to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your E34. These solid UHMW mounts are a direct replacement for your original E34 535i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
14mm Front Differential Bushing Upgrade
14mm Front Differential Bushing Upgrade
You will need to drill the diff casing & tap to M14x1.5
Condor Speed Shop - Corporate Logo
T#:597385
Part#: 14MME36DIFFBU
Ships in 3 Business Days
$ 130.00 USD
Free Shipping
Add to Wish List
$ 130.00 USD
Free Shipping
Add to Wish List
These E36 & E36 M3 Differential Bushings from Condor Speed Shop are designed for the street and the track. You won't have to worry about any more rubbery flex in your diff mounts during hard acceleration. They use UHMW in all their suspension bushings because they are stiff, and have almost zero deflection while also absorbing vibration. It will outlast other types of rubber and polyurethane bushings.
Show More Show Less
Poly Transmission Mount Set
Poly Transmission Mount Set
Condor Speed Shop - Corporate Logo
T#:597363
Part#: TRANSIX_E39P
Ships in 2 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.
Show More Show Less
Condor Speed Shop Solid Engine Mount Set - E34 525i
Condor Speed Shop Solid Engine Mount Set - E34 525i
Condor Speed Shop - Corporate Logo
T#:577959
Part#: E34M
Ships in 3 Business Days
$ 117.00 USD
Free Shipping
Add to Wish List
$ 117.00 USD
Free Shipping
Add to Wish List
Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E34. These solid UHMW motor mounts are a direct replacement for your original E34 525i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is/ic w/ M42
Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...
Condor Speed Shop - Corporate Logo
T#:577964
Part#: E30_M42M_TRANS
Ships in 3 Business Days
$ 125.00 USD
Free Shipping
Add to Wish List
$ 125.00 USD
Free Shipping
Add to Wish List
These solid UHMW motor mounts are made specifically for M42 powered e30s. Under hard braking the stock mounts allow the M42 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Fitment: 1990-1991 E30 BMW 318i, 318is, 318ic
Show More Show Less
Condor Speed Shop Solid Motor Mount Set - E30 w/ M10
Condor Speed Shop Solid Motor Mount Set - E30 w/ M10
Condor Speed Shop - Corporate Logo
T#:577965
Part#: E30_M10M
Ships in 3 Business Days
$ 90.00 USD
Free Shipping
Add to Wish List
$ 90.00 USD
Free Shipping
Add to Wish List
These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine Mount
Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...
Condor Speed Shop - Corporate Logo
T#:577943
Part#: E36HS
Ships in 5 Business Days
$ 18.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 18.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping