Find Parts That Fit Your Vehicle

Engine Mounts

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).
Sort By:
Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmission Mount Set - E30 BMW
Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...
Condor Speed Shop - Corporate Logo
T#:577564
Part#: S14M+T
Ships in 3 Business Days
$ 80.00 USD
Free Shipping
Add to Wish List
$ 80.00 USD
Free Shipping
Add to Wish List
These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. This kit includes Solid Transmission Mounts as well for fully solid powertrain mounting!
Show More Show Less
S55 Billet Motor Mount Inserts
S55 Billet Motor Mount Inserts
Vargas Turbo Technologies - Corporate Logo
T#:597677
Part#: VTT-INSERT-2
Ships in 10 Business Days
$ 178.99 USD
Free Shipping
Add to Wish List
$ 178.99 USD
Free Shipping
Add to Wish List
Instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.
Show More Show Less
Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30
Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30
Condor Speed Shop - Corporate Logo
T#:577565
Part#: S14M
Ships in 1 Business Day
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 55.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1602
Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...
Condor Speed Shop - Corporate Logo
T#:577575
Part#: PLYE10TRANS
Ships in 2 Business Days
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor Speed Shop Solid Engine Mount Set - E34 525i
Condor Speed Shop Solid Engine Mount Set - E34 525i
Condor Speed Shop - Corporate Logo
T#:577959
Part#: E34M
Ships in 2 Business Days
$ 117.00 USD
Free Shipping
Add to Wish List
$ 117.00 USD
Free Shipping
Add to Wish List
Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E34. These solid UHMW motor mounts are a direct replacement for your original E34 525i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less
Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine Mount
Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...
Condor Speed Shop - Corporate Logo
T#:577943
Part#: E36HS
Ships in 4 Business Days
$ 18.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 18.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.
Show More Show Less
Condor Speed Shop Solid Motor Mount Set - E30 w/ M10
Condor Speed Shop Solid Motor Mount Set - E30 w/ M10
Condor Speed Shop - Corporate Logo
T#:577965
Part#: E30_M10M
Ships in 2 Business Days
$ 90.00 USD
Free Shipping
Add to Wish List
$ 90.00 USD
Free Shipping
Add to Wish List
These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping