Find Parts That Fit Your Vehicle

Connecting Rods

Connecting rods are responsible from translating combustion forces downward to spin the crankshaft. Individual replacements as well as full kits are available from Turner for your next engine project.
Sort By:

BE Bearings - Corporate Logo
T#:403653
Part#: BE-CRB50-S65
In Stock
$ 294.99 USD
Free Shipping
$ 294.99 USD
Free Shipping
Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.
Show More Show Less
BE Bearings - Corporate Logo
T#:403655
Part#: SP1527HKSTDS65
In Stock
$ 589.00 USD
Free Shipping
$ 589.00 USD
Free Shipping

BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

  • Designed specifically for BMW S65B40 engines
  • Silver-oxide coating withstands 30% more load capacity
  • Improved performance under low-oil and boundary conditions
  • Stronger backing material for enhanced durability
  • Corrects factory BMW rod bearing clearance issue
  • Ideal for high-horsepower applications and factory 10W60 weight oils
  • Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

  • 2008-2013 E9X BMW M3 (S65)
Show More Show Less
BE Bearings Connecting Rod Bearing Upgrade Set - BMW S85
Now ordered under BE Bearings "SP1527F-STD-S85"
BE Bearings - Corporate Logo
T#:403658
Part#: SP1527HKSTDS85
In Stock
$ 734.00 USD
Free Shipping
$ 734.00 USD
Free Shipping

Designed and manufactured by Clevite to BE Bearing specifications.

These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure.  Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil.

These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating.

  • Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended).
  • Designed with extra clearance to "fix" the BMW rod bearing design flaw.
  • Designed for use with factory 10W60 weight oils.
  • Tri-Armor coated for low conditions during cold start
  • Ideal for start-stop vehicles
  • Applicable for BMW engines S85B50
  • Standard Clearance
  • Sold as complete set (10-cylinders)

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less

BE Bearings - Corporate Logo
T#:403657
Part#: BE-CRB50-S85
In Stock
$ 369.00 USD
Free Shipping
$ 369.00 USD
Free Shipping

Designed by BE Bearings, manufactured by ARP.  These custom made rod bolts are designed to be used on BMW factory connecting rods.  BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion.  Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

  • Composition:   ARP2000®
  • Yield strength:   200,000 PSI
  • Tensile strength:   220,000 PSI
  • Torque specification:   50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less

Eagle - Corporate Logo
T#:640320
Part#: CRS5313B63D
In Stock
$ 619.99 USD
Free Shipping
$ 619.99 USD
Free Shipping
Eagle is synonymous with exceptional quality and unwavering commitment to customer satisfaction, which has cultivated a loyal and satisfied customer base. This dedication has propelled Eagle to unparalleled growth throughout the years, expanding their product range to include crankshafts and a wider selection of connecting rods. Key Benefits: Proven Excellence: Eagle's reputation as the largest and most respected aftermarket connecting rod and crank manufacturer underscores their commitment to excellence. Continuous Advancements: Eagle's relentless pursuit of perfection is evident in their continuous design enhancements, materials innovation, and manufacturing techniques, ensuring their products are always at the forefront of performance. Lightweight Design: Eagle prioritizes making their products lighter, enhancing your engine's performance while maintaining structural integrity. Strength and Durability: Every Eagle connecting rod is engineered for superior strength, ensuring your engine can handle high-performance demands without compromise. Efficient Manufacturing: Eagle's dedication to efficiency guarantees that each connecting rod is manufactured with precision and attention to detail, resulting in top-notch quality. Diverse Applications: With a diverse product range, Eagle ensures compatibility with a wide variety of engines, making their connecting rods a versatile choice for automotive enthusiasts.
Show More Show Less
CP Carrillo - Corporate Logo
T#:10128444
Part#: CAR-CRS-S14-CARR
Ships on Aug 28, 2026
$ 1,439.99 USD
Free Shipping
$ 1,439.99 USD
Free Shipping
Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. Quality and pride go hand-in-hand at Carrillo Industries. Manufacturing a Carrillo rod is much more than cutting and forging, meeting production goals and shipping deadlines. Every Carrillo rod is made with the goal of winning in mind and the Carrillo rods are a proven performers in both street and racing S14 engines. Carillo's fasteners and "Carrilloy" rods has proven popular with all racers who want the best. Special Chrome-Moly based alloy Forged Rods Lightweight Design for low mass Vs. Stock Strong and proven in racing Excellent quality control Tight tolerances and balancing Includes High Quality Non-stretch CARR Rod Bolts Tech Notes: WMC Bolts are the standard hardware included and are an excellent fastener. For extreme output applications and all-out racing, the CARR bolt option holds maximum RPMs and HP levels.
Show More Show Less

CP Carrillo - Corporate Logo
T#:373960
Part#: BMS5465472H06
Back Ordered
$ 1,845.99 USD
Free Shipping
$ 1,845.99 USD
Free Shipping
Upgrade your engine's performance with Pro-H Connecting Rods by Carrillo – these fully forged rods are designed for enthusiasts who have supercharged their engines or added power-boosting modifications. If you frequently push your engine to high RPMs, this component is a must-have. Carrillo's connecting rods are the epitome of precision, strength, and quality, boasting over four decades of engineering excellence. These rods strike the perfect balance between lightweight construction and unmatched durability. Specifications: PE Width: 0.784in / 19.91mm BE Width: 0.784in / 19.91mm Bolt Size: 3/8 WMC BE Bore: 2.0866in / 53.000mm Pin Diameter: 21mm Length: 5.472in / 139.00mm Rod Bolt Diameter: 3/8 Rod Bolt Type: WMC Tool Steel
Show More Show Less
CP Carrillo - Corporate Logo
T#:25042509
Part#: SCR9101-4
Back Ordered
$ 1,230.99 USD
Free Shipping
$ 1,230.99 USD
Free Shipping
Carrillo rods are your number one option for performance connecting rods! If you are looking to upgrade your N20 engine to handle greater power, we highly recommend these Pro-H connecting rods. Upgrading connecting rods in your engine can bring several benefits, particularly if you're looking to enhance performance, reliability, and overall durability. Here are some reasons why you might consider investing in upgraded connecting rods: Increased Strength: Upgraded connecting rods are often made from stronger materials, such as forged steel or titanium, compared to stock rods. This increased strength helps withstand higher levels of stress and load, making them suitable for high-performance applications. Improved Durability: Enhanced materials and manufacturing processes contribute to improved durability, reducing the risk of connecting rod failure, especially in high-stress situations. This is crucial for engines that undergo frequent high-speed or high-stress conditions, such as in racing or heavy-duty applications. Higher RPM Capability: Upgraded connecting rods are designed to handle higher engine RPM (revolutions per minute) without succumbing to fatigue or deformation. This is beneficial for those seeking increased horsepower and torque at higher engine speeds. Reduced Weight: Some upgraded connecting rods are engineered to be lighter while maintaining strength, contributing to a lower overall rotating mass in the engine. This can result in quicker revving, improved throttle response, and better overall performance. Enhanced Precision: Upgraded rods often undergo more precise machining processes, ensuring tight tolerances and improved balance. This precision can lead to better engine stability and reduced vibration, ultimately extending the life of engine components. Compatibility with High-Performance Builds: If you're planning on modifying your engine for increased horsepower through methods like turbocharging or supercharging, upgraded connecting rods become essential. They provide the necessary strength and reliability to handle the increased stresses associated with forced induction. Prevention of Catastrophic Failures: Upgrading connecting rods can act as a preventive measure against catastrophic engine failures. The improved strength and durability reduce the risk of a connecting rod breaking, which could lead to severe engine damage. Specifications: CC(in): 5.683 CC(mm): 144.35 Style: PRO-H Bolt Size: 3/8 Bolt Type: WMC Pin Width(in): 0.822 Pin Width(mm): 20.88 Big Width(in): 0.822 Bid Width(mm): 20.88 Big Bore(in): 2.1112 Big Bore(mm): 53.62 Pin Size: 22mm QTY: Set of 4 Founded by Fred Carrillo in 1963, Carrillo Connecting Rods was established with an unwavering commitment to uncompromising standards in manufacturing. Fred recognized that the relentless pursuit of speed demanded an equally fervent dedication to the quality of components. This foundational philosophy remains as strong today as it was at the inception of Carrillo in 1963. At CP-Carrillo, quality and pride are inseparable. The process of crafting a CP-Carrillo rod transcends mere forging, production targets, and shipping deadlines. The evolution of connecting rod design has become a collaborative effort involving skilled specialists. Each connecting rod is a precision symphony, with material specialists, forging experts, production craftsmen, design engineers, and engine specialists contributing their expertise and artistry. Customer feedback plays a pivotal role in our continuous product improvement. The close interaction between customers, engineering, and manufacturing fosters the most effective rod designs, enhancing accuracy and service—a value that becomes apparent during your engine build. CP-Carrillo's dimensional integrity stands unparalleled, setting a standard of excellence in the industry.
Show More Show Less

CP Carrillo - Corporate Logo
T#:7624642
Part#: CAR-CRS-B48-WMC
Ships on Aug 28, 2026
$ 1,399.99 USD
Free Shipping
$ 1,399.99 USD
Free Shipping
Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. Quality and pride go hand-in-hand at Carrillo Industries. Manufacturing a Carrillo rod is much more than cutting a forging, meeting production goals, and shipping deadlines. Every Carrillo rod is made with the goal of winning in mind and the Carrillo rods are a proven performer in both street and racing B48 engines. Carillo's fasteners and "Carrilloy" rods have proven popular with all racers who want the best. Special Chrome-Moly based alloy Forged Rods Lightweight Design for low mass Vs. Stock Strong and proven in racing Excellent quality control Tight tolerances and balancing Includes High-Quality Non-stretch WMC Rod Bolts
Show More Show Less