Find Parts That Fit Your Vehicle

The Turbo Engineers Turbo Upgrades

This is where you will find upgraded turbochargers that make more boost and can handle higher power levels. If your stock turbos are worn, it is a perfect time to look into upgrading the factory snails with something larger.
Sort By:
New TTE920+ Turbocharger Upgrade - F90 M5 / F9X M8
New TTE920+ Turbocharger Upgrade - F90 M5 / F9X M8
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200592
Part#: TTE10380
In Stock
$ 6,889.99 USD
Add to Wish List
$ 6,889.99 USD
Add to Wish List
TTE920+ features larger billet TTE compressors and larger 9 blade TTE exhaust turbines with a TTE upgrade motorsport bearing pack.
New TTE940 S58 Turbocharger Upgrade
New TTE940 S58 Turbocharger Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:12577549
Part#: TE10516
Ships on Jul 21, 2026
Starting at $ 6,691.99 USD
Add to Wish List
Starting at $ 6,691.99 USD
Add to Wish List
Welcome to The Turbo Engineers' TTE940 Stage 3 Turbocharger upgrade for the BMW S58 Motor. To construct a pair of TTE940 turbos, TTE removed the original compressors and employ a far larger and more efficient billet wheel and mill the compressor cover to the optimum gap to match the new compressor profile. TTE also fitted TTE 9 blade Low-Mass turbines in the turbine housings for greater flow and lower exhaust gas temperatures at high boost and designed and fitted our upgrade bearing pack for durability. The Turbo Engineers also supply TTE upgrade turbo inlet intakes for no restrictions and ease of use. This combination gives the greatest power potential but also a fast boost response for the ultimate Plug & Play hybrid turbocharger upgrade. Race tested and approved. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Original Genuine BMW turbochargers as base parts TTE Billet Milled compressor 7+7 BLADE TTE High-Flow 9 blade Turbine TTE Upgrade Bearings 900+ PS Capable Plug & Play installation TTE Upgrade intake inlets (not pictured) Proven TheTurboEngineers quality Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Software recalibration is required Made in Germany Price shown is for a PAIR of turbochargers Also available is the optional upgrade to include The Turbo Engineers' Heat Shield Isolation Add-On. Non-woven silicate fiber surrounded by welded foil Stainless steel rigid insulation foil High mechanical and vibration resistance, lightweight Excellent fluid splash and spill resistance Excellent corrosion resistance Resilient at continuous temperatures up to 1300°C Reduced dimensions Reduced engine bay temps Performance improvements Adjacent component protection Up to 600°C lower temps at Isolation surface NOTE: Any cancellations will incur a 5% refund fee to cover transaction costs.
Show More Show Less
New TTE400 N20 Turbocharger Upgrade
New TTE400 N20 Turbocharger Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Only works with aftermarket inlets
The Turbo Engineers - Corporate Logo
T#:13200606
Part#: N20TTE400
Ships on Jul 21, 2026
Starting at $ 2,164.99 USD
Free Shipping
Add to Wish List
Starting at $ 2,164.99 USD
Free Shipping
Add to Wish List
To construct a TTE400 N20, the folks at TTE change the original compressor and employ a far larger and more efficient billet 6+6 wheel and mill the compressor cover to the optimum gap to match the new compressor profile. Notice how they CNC mill the cover to have a smooth transition to the intake inlet, no big step to hinder airflow as you see on the competition's offerings. They replace the original exhaust turbine and CNC mill the turbine housing to install a larger 9 blade turbine for greater gas flow and lower backpressure.
Show More Show Less
MINI R56 Upgraded Turbocharger - TTE300
MINI R56 Upgraded Turbocharger - TTE300
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:23383332
Part#: TTE10084
Ships on Jul 21, 2026
$ 2,099.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 2,099.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Upgrade your Mini's performance with the TTE300 turbocharger from Turbo Engineers (TTE). Built on a brand new Genuine BorgWarner twin-scroll turbocharger, the TTE300 undergoes a meticulous transformation. Featuring a larger TTE billet compressor wheel, CNC re-profiled compressor cover, and intake porting for optimized airflow, this turbocharger ensures rapid response and maximum efficiency. The CNC re-profiled exhaust turbine housing with a larger 9Blade turbine provides higher flow and reduced back pressure. Equipped with a special profile 360-degree high-performance BorgWarner motorsport journal bearing and a sprung Genuine BorgWarner actuator, the TTE300 guarantees durability and excellent transient response. Delivering 300PS+ with proven 98Ron fuel, this plug-and-play turbocharger is a testament to TheTurboEngineers' quality, meticulously assembled and balanced for high-speed performance.

Benefits:

  • Larger TTE billet compressor wheel for faster response
  • Optimized airflow and reduced turbulence
  • Higher flow turbine with less back pressure
  • Durable BorgWarner motorsport journal bearing
  • Plug-and-play installation for easy setup
  • Made in Germany with meticulous assembly and high-speed balancing
Show More Show Less
New TTE740+ Turbocharger Upgrade - S55
New TTE740+ Turbocharger Upgrade - S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200593
Part#: TTE10076
Ships on Jul 21, 2026
$ 6,200.99 USD
Add to Wish List
$ 6,200.99 USD
Add to Wish List
The TTE740+ upgrade turbocharger stage with oversize inlets included. Based on the original Mitsubishi bi-turbo system for the S55 B30 - plug and play! Quite possibly the best-performing complete hybrid turbocharger stage available.
Show More Show Less
New TTE850M+ Upgraded Turbocharger - S63
New TTE850M+ Upgraded Turbocharger - S63
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200609
Part#: TTE10077
Ships on Jul 21, 2026
$ 6,889.99 USD
Add to Wish List
$ 6,889.99 USD
Add to Wish List
Genuine Garrett Housings & Components, TTE 6+6 Billet compressor, TTE 9 blade Turbines, Special TTE Reinforced Bearing System, 850+ capable!
New TTE460 N55 Turbocharger Upgrade
New TTE460 N55 Turbocharger Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200586
Part#: TTE10072
Ships on Jul 21, 2026
Starting at $ 3,150.00 USD
Add to Wish List
Starting at $ 3,150.00 USD
Add to Wish List
At the core of the TTE460 is a larger TTE compressor wheel, chosen because it is highly efficient and creates an extremely high flow for comparative size. Re-Profiled compressor cover to optimized tolerance to ensure maximum compressor efficiency is given. The original exhaust turbine is retained but modified for greater flow
Show More Show Less
New TTE900M+ Upgraded Turbocharger - S63
New TTE900M+ Upgraded Turbocharger - S63
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200608
Part#: TTE10078
Ships on Jul 21, 2026
$ 7,650.00 USD
Add to Wish List
$ 7,650.00 USD
Add to Wish List
Genuine Garrett Housings & Components, Highly Efficient Next Gen TTE Billet Compressor Geometry, Larger diameter 76mm billet intakes, Latest Last Gen Larger 9 blade Turbine, Special TTE Reinforced Bearing System, 900+ capable!
Show More Show Less
New TTE500 Turbocharger Upgrade - N54
New TTE500 Turbocharger Upgrade - N54
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:13200603
Part#: N54TTE500
Ships on Jul 21, 2026
Starting at $ 1,709.99 USD
Add to Wish List
Starting at $ 1,709.99 USD
Add to Wish List
Hybrid turbocharger for the N54 motor with a big performance, lightning spool, and durable performance. Based on the original turbochargers for Plug & Play fitment along with the use of larger diameter inlet turbo feeds.
Show More Show Less
New TTE580 B58 Turbocharger Upgrade
New TTE580 B58 Turbocharger Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 6-Port Heads only - Will not fit 2-Port Heads
The Turbo Engineers - Corporate Logo
T#:12577546
Part#: TTE10321
Ships on Jul 21, 2026
$ 4,964.99 USD
Free Shipping
Add to Wish List
$ 4,964.99 USD
Free Shipping
Add to Wish List
TTE580 is the very latest hybrid performance upgrade turbocharger based on the Original turbocharger for the BMW B58 inline-six-cylinder turbocharged engine. Superfast spool and response with extra power. We feel this is the best performing 550+hp hybrid. Engineered & Enhanced To construct a TTE580 The Turbo Engineers change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to the optimum gap to match the new compressor profile. The Turbo Engineers change the Original exhaust turbine for a larger 9-blade high-flow item to lower EGT and raise the power potential but maintain a great boost response profile. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Product Highlights: Original Genuine turbocharger as the base part Original Genuine actuator Original Genuine diverter valve TTE Billet Milled compressor 7+7 Blade with Extended Tip, 55.5mm Inlet TTE High-Flow 9 blade turbine Plug & Play installation 500+ HP on 98ron and proven at 580hp on 102ron Proven TheTurboEngineers quality Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Software recalibration is required Made in Germany
Show More Show Less
New TTE550 N55 Turbocharger Upgrade
New TTE550 N55 Turbocharger Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
The Turbo Engineers - Corporate Logo
T#:12577550
Part#: TE10074
Ships on Jul 21, 2026
Starting at $ 4,148.99 USD
Add to Wish List
Starting at $ 4,148.99 USD
Add to Wish List
The TTE550 for the N55 motor. Still keeping the original turbocharger the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade so producing extra power. Equally, The Turbo Engineers change the original exhaust turbine for a far larger but very lightweight 9-blade TTE-designed turbine for lower exhaust gas backpressure giving greater performance, yet still giving a good spool response. The Turbo Engineers also fitted a TTE motorsport upgrade bearing system for durability. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Features Genuine Housings & Components Highly Efficient Next Gen Billet Compressor Geometry Optimised Compressor Cover Machining Clearances Genuine diverter valve Fitment As Original. Plug & Play TTE Billet Larger Compressor Wheel 56mm Inlet TTE High-Flow Bigger Turbine (Unlike others that retains stock turbine) Motorsport Bearing Pack 550 PS Proven Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Proven TheTurboEngineers quality Software recalibration is required Made in Germany
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Turbo Upgrades

Brand

Price

$
$

Shipping