Looking to minimize chassis flex during demanding cornering with your BMW? Your search ends here. This meticulously crafted front strut tower bar is the solution you've been seeking. Tailored for BMW enthusiasts, it expertly connects the front strut towers, significantly reducing chassis flex and elevating stability during intense cornering maneuvers.
Elevate your BMW's cornering performance and reduce chassis flex with this front strut tower bar. Turner Motorsport has the solution you've been looking for.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Rear Axle Carrier Panel (RACP) failure is a well-documented issue that plagues all BMW E46 models. Due to thin sheet metal mounting, the forces applied during cornering, acceleration, and braking create stress fractures in the carrier panel, resulting in large cracks or breaks that risk the structural integrity of your chassis. To fix this issue, many enthusiasts opt to install weld-in reinforcement plates on the underside of the RACP. While this remedies the formation of additional stress cracks and adds rigidity to failure-prone areas, it does not prevent the entire carrier panel from flexing during high-performance driving.
Our all-new Rear Subframe Reinforcement Brace is engineered to add structure to the E46's rear chassis under high-stress conditions, eliminating the common weak points in the RACP while providing the confidence you need for performance driving. Don't let chassis flex limit your car’s potential—upgrade your E46 with the Turner Motorsport Rear Subframe Reinforcement Brace today!
How It Works:
During performance driving, the Rear Axle Carrier Panel (RACP) must react the forces of longitudinal and lateral accelerations. During forward acceleration, the differential transmits torque through the subframe to the RACP, forcing the rearmost subframe mounting points downward. This downward movement flexes the carrier panel, reducing its ability to handle torque efficiently. By linking the rearmost subframe mounting points to the rear shock towers, downward flex is restricted, resulting in improved torque transfer and stability. Alternatively, high-grip cornering generates lateral acceleration (side-to-side) forces across the RACP. Similar to how a rear strut brace functions, connecting the rear shock towers helps to counteract these forces. Adding the subframe to this connection further reduces lateral loads, eliminating side-to-side flex and enhancing overall stability.
Features & Design:
Four-Point Triangulated Structure: Links the rearmost subframe mounting locations to both rear strut towers for superior load distribution. Enhanced Stability: Reduces lateral and longitudinal RACP flex during acceleration, braking, and cornering. Improved Torque Transfer: Minimizes downward flex of the RACP, ensuring efficient power delivery for enhanced driveability. High-Performance Durability: Heavy-duty steel tube construction ensures lasting support during spirited driving, track use, and for vehicles with increased power output. Blue Powdercoat Finish: Offers fantastic corrosion resistance, protection from scuffs and scratches, and a stylish appearance that is sure to complement your performance-centric E46. Underside Reinforcement Compatibility: Designed to work seamlessly alongside our underside RACP reinforcement plates (TDR4675412, T#91). Kit Includes:
Rear Subframe Brace Sedan Subframe Brace Spacers Extended-Length Drill Bit (1/4", 12" Overall Length) High-Speed Drill Bit (12.5mm, 152mm Overall Length) Drill Bit Guide Extended Subframe Bolts Zinc-Plated Steel Hex Nut (2) Installation & Support:
Need installation tips? Our team has assembled a guided start-to-finish installation tutorial, including detailed instructions on drilling and cutting your trunk floor panel for perfect fitment. Click HERE for Installation Instructions
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.
Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.
This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
This product was last offered at the strikethrough price on
04-03-2026
This product was last offered at the strikethrough price on
04-03-2026
Enhance your BMW's performance with strut bars designed to reduce chassis flex. These bars effectively connect shock towers, providing increased stiffness and rigidity. Improve suspension responsiveness, road manners, and handling characteristics for a more controlled driving experience.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.
Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.
This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
Enhance your Mini's handling with the MINI R50 R52 R53 Front Upper Race-Spec Strut Tower Bar. Specifically designed for Mini R50, R52, and R53 models, this strut tower bar improves chassis rigidity for sharper handling and better cornering performance. Upgrade your Mini's suspension with this race-spec strut tower bar for a more thrilling driving experience.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Carbon Performance Intake and 3-Point Strut Brace Kit
We know the G20 and G42 BMW models deliver an incredible driving experience, whether equipped with the B48 or B58 engine. However, we’ve identified key areas where performance and style can be taken to the next level. That’s why we’ve developed the Turner Carbon Fiber Performance Kit, combining our Turner Carbon Fiber Intake System and Turner Carbon Fiber Strut Tower Brace into one ultimate package.
Turner Carbon Fiber Intake System
Upgrade your engine bay with our Turner Carbon Fiber Intake System, designed for maximum performance and style.
Unmatched Airflow: Our intake flows 8% more air than the factory system (445.0 CFM vs. 410.1 CFM), reducing stress on your turbo and delivering optimal performance.
Lower Intake Temps: The enclosed carbon fiber lid reduces intake temperatures by up to 13°F compared to open intakes, ensuring consistent performance.
Premium Materials: Built with a gloss carbon fiber intake tube featuring MAF scaling, a durable 6061-T6 anodized flange, and a wrinkle black powder-coated heat shield for strength and style.
High-Performance Filtration: Includes a conical, reusable air filter with 8-ply oiled cotton gauze and a velocity stack for superior filtration and efficiency.
This intake is the perfect blend of form and function, offering noticeable performance gains while giving your engine bay the high-end look it deserves.
Turner Carbon Fiber Strut Tower Brace
Inspired by the performance-focused "M" chassis, our Turner Carbon Fiber Strut Tower Brace is engineered to improve handling and chassis rigidity.
Enhanced Handling Dynamics: Reduces chassis flex by effectively distributing cornering loads between the strut towers, maintaining consistent wheel alignment geometry during aggressive driving.
Precision Engineering: CAD-designed for a seamless fit with factory mounting points, our strut brace is built with lightweight yet ultra-rigid carbon fiber featuring a 2x2 twill weave.
Durable Construction: Features billet aluminum mounts machined from 6061-T6 aluminum, type II anodized, and securely bonded to the carbon fiber for uncompromised strength and stability.
Striking Aesthetics: Our high-gloss carbon fiber design adds a motorsport-inspired look to your engine bay, complementing any BMW enthusiast's style.
Why Choose the Turner Performance Kit?
Performance Gains: Maximize airflow and structural rigidity to make your G20 or G42 sharper, more responsive, and more enjoyable to drive.
Premium Appearance: Transform your engine bay with matching carbon fiber components that deliver both performance and head-turning style.
Easy Installation: Both the intake and strut brace are designed for a straightforward, bolt-on installation using factory mounting points—no modifications required.
Whether you’re hitting the track or carving through back roads, the Turner Motorsport G20/G42 Carbon Fiber Performance Kit ensures your BMW delivers on all fronts: performance, handling, and aesthetics. Upgrade your 2 or 3 Series today with the Turner kit designed to bring your driving experience closer to the ultimate M-car level.
