Find Parts That Fit Your Vehicle

Home
Suspension
Strut Braces & Stress Bars

BMW Strut Braces & Stress Bars

BMWs need some added chassis strengthening in the front. You may notice some "chassis flex" when cornering or driving over a bumpy road. The reason for this is the incredible amount of force being applied to front strut towers. They have a tendency to flex when force is applied to them. Tying the strut towers together with a brace reduces the amount of flex and soldifies your car's chassis. Easy installation.

Sort By:

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

T#:50837389

Part#: RE.RBE46

Special Order: No Guaranteed ETA

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Reinforces the strut towers against deformation while adding valuable triangulation to the front end for sharper, more predictable handling. Designed to prevent “mushrooming” and other distortion caused by rough roads or stiff suspension setups, these plates help maintain consistent suspension geometry by reducing unwanted chassis flex. The result? A more stable, confidence-inspiring front end under load. Strut tower plates are engineered to sit perfectly flush against the towers. If they don’t, it’s a sign the towers have experienced some deformation. In minor cases, this can often be corrected using a block of wood and a hammer to carefully restore the mounting surface.

Show More Show Less

OMP Steel Front Tower Brace

T#:54388398

Part#: MA/1869

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

A90 Supra Experience Package

Call In Or Chat For Best Price!

T#:30197980

Part#: A90-SUPRA-E-B

Ships on Aug 31, 2026

Sale - Save 10% $ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,467.99

This product was last offered at the strikethrough price on
07-31-2026

$ 2,220.82 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge Includes Dinan Exhaust Dinan Intake Dinan Turbo Inlet Strut Braces Throttle Booster Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +13 HP and +14 lb-ft of torque (Exhaust +Intake) Smoother, louder and sportier sound (Exhaust + Intake + Turbo Inlet) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonator between the catalyst and rear muffler for increased volume (Exhaust) 10 pounds lighter than the stock for an improved power-to-weight ratio (Exhaust) Reduced intake restriction for greater flow that allows increased turbo efficiency and greater power potential on modified builds (Intake + Turbo Inlet) Improved throttle response (Intake + Turbo Inlet) Increased chassis rigidity with decreased flex during cornering for improved handling and performance (Strut Braces) Customizable throttle mapping for enhances feel and acceleration (Throttle Booster) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

MINI R55 to R59 OMP Steel Front Strut Tower Brace

T#:31291037

Part#: MA/1913

Back Ordered

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MINI R55 to R59 OMP Steel Front Strut Tower Brace is designed to enhance the performance and handling of the MINI Cooper by reducing body roll and torsion. Constructed from high-strength steel and painted red, this strut tower brace features an adjustable bar that mounts securely to the strut towers using the stock hardware. It is engineered to clear the stock air box, ensuring a seamless fit without interference. Please note that this brace will not fit the MINI Cooper JCW GP2 without modifications to the strut mount bolt holes.

Key benefits of the MINI R55 to R59 OMP Steel Front Strut Tower Brace include:

Enhanced Performance: Reduces body roll and torsion for improved handling.
Durable Construction: Made from high-strength steel and painted red.
Adjustable Fit: Features an adjustable bar for a precise fit.
Clearance: Designed to clear the stock air box.
Easy Installation: Utilizes stock hardware for straightforward installation.

Show More Show Less

OMP Steel Front Brace - Lower

T#:54388399

Part#: MA/1870

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Engineered for the enthusiast who demands precise cornering and razor-sharp feedback, this Performance Lower Front Brace is your ticket to a more connected driving experience.

Project Cars

SELECT YOUR BMW

BMW Strut Braces & Stress Bars

RACEBRACE Strut Brace - 6 Cylinder E46 M3/3-Series

OMP Steel Front Tower Brace

A90 Supra Experience Package

MINI R55 to R59 OMP Steel Front Strut Tower Brace

OMP Steel Front Brace - Lower

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results