Rear Control Arm

Stock rear lower control arms offer very little adjustment for alignment, especially in lowered vehicles, due to their use of an eccentric bolt. These aftermarket performance control arms from ECS Tuning are designed for maximum adjustability, allowing you to maximize handling and minimize tire wear.

To ensure maximum reliability, ECS Tuning's control arms are constructed from strong, lightweight 6061-T6 aluminum and feature a 303 stainless steel center turnbuckle that offers over 8 degrees of fast and precise camber adjustment. The inner bushing is a stock style serviceable OEM bushing for long life and inexpensive maintenance.

Features:

Durable construction suitable for the daily driver and track car alike
8+ degrees adjustment range for dialing in any suspension and wheel/tire setup
Center located adjuster for maximum clearance during adjustment
OEM-style bushing for long life and inexpensive service
Black anodized 6061-T6 aluminum with 303 stainless steel turnbuckle
Includes new hardware
*With the exception of the stance community, most enthusiasts will need no more than a few degrees of adjustment range. Total adjustment often is dependent on wheel/tire clearances.

The rear lower control arms on E82/E9X models are the weakest link in the rear suspension. The arm is made from folded sheetmetal and it bends and deforms easily. Not only will it deform from potholes and curbs, tow truck drivers love to hook onto them without realizing how weak they are. We have seen other race teams complete the box section to make them stronger. A bent arm will throw off the geometry in the suspension, potentially affecting handling and tire wear. These aluminum arms are both lighter and stronger than the factory sheetmetal arms and is the best solution for chronic bending of the stock arm. These are a direct replacement to your stock arms with no changes needed to your alignment. New high-grade hardware is included.

Note: the stock arm is designed from the factory to be intentionally weak. These arms will bend so that something else in the suspension does not break. Our race cars used the stock sheetmetal arm but we replaced them often. We found that it was better to finish a race with a bent arm than not finish due to a catastrophic failure. The ECS arms are still designed to be the weakest link but are far stronger than the factory arm and will not bend as easily.

This item fits the following BMWs:

2008-2013 E82 E88 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

The Powerflex Rear Upper Arm Inner Bushing for BMW E36 and E46 3 Series, Z4, and X3 is designed to significantly enhance the performance and reliability of the rear suspension. By replacing the factory rubber bushings with high-quality polyurethane, this upgrade offers a range of benefits for driving enthusiasts.

Key Advantages:

1. Improved Handling and Control: The firmer polyurethane material reduces flex in the upper control arm, resulting in enhanced stability and cornering performance. This leads to a more predictable and confident driving experience.
2. Long-Lasting Durability: Engineered to resist wear from environmental factors such as heat, oil, and road debris, these bushings offer superior longevity compared to traditional rubber options, maintaining performance over time.
3. Enhanced Steering Feedback: The increased rigidity of the bushing allows for better communication between the vehicle and driver, improving steering response and providing a more connected feel on the road.
4. Direct Fit for Easy Installation: Specifically designed for the E36 and E46 3 Series, Z4, and X3 models, these bushings ensure an accurate fit, making installation straightforward without requiring modifications.

Ideal for BMW owners looking to upgrade their suspension system, these bushings provide a perfect blend of performance, durability, and responsiveness, making them suitable for both daily driving and high-performance applications.

For BMW E30, Z3, E21, and 2002 models, upgrading to adjustable rear trailing arm bushings from manufacturers like Powerflex offers both improved performance and the ability to fine-tune suspension alignment. These bushings are designed to replace the factory rubber bushings, which can degrade over time and lead to imprecise handling.

Key Features and Benefits:

• Adjustable Alignment: These adjustable rear trailing arm bushings allow you to modify rear toe and camber settings. This is crucial for fine-tuning the suspension for different driving styles, especially if the car is used in motorsport applications like track days or autocross, or if the car has been lowered and needs suspension corrections.
• Superior Handling: By significantly reducing the play in the rear trailing arms, these bushings improve the car’s handling dynamics. They keep the rear suspension more rigid during acceleration, braking, and cornering, resulting in sharper, more predictable handling.
• Polyurethane Durability: Unlike the OEM rubber bushings, which wear out over time due to heat, road grime, and chemicals, these adjustable bushings are made of durable polyurethane. This material resists aging, cracking, and wear, ensuring consistent performance over a longer period.
• Reduced Deflection: Adjustable polyurethane bushings limit suspension deflection, allowing the vehicle to maintain optimal suspension geometry under load. This improves cornering performance and reduces body roll.
• Longer Service Life: Polyurethane bushings are known for their longevity compared to rubber bushings, offering a "fit and forget" solution for car owners who want reduced maintenance and better overall reliability.

Installation and Adjustment:

• Direct Fit Replacement: These bushings are designed as a direct replacement for the stock rubber bushings, offering the same fitment while adding adjustability. No major modifications are typically required, making installation easier for those familiar with suspension work.
• Alignment Precision: Once installed, these bushings allow precise adjustments to the suspension alignment, which is ideal for correcting issues that arise from modifications like lowering the vehicle or installing performance suspension components.

Ideal for:

• BMW E30 (3 Series)
• BMW Z3
• BMW E21 (3 Series)
• BMW 2002

These adjustable rear trailing arm bushings are perfect for enthusiasts looking for more control over their vehicle’s alignment and handling, whether for street driving or performance applications. They offer a great balance of increased performance, durability, and adjustability without sacrificing daily driving comfort.

The Powerflex Adjustable Rear Trailing Arm Bushing for the BMW E32, E34, E28, and E24 models is engineered to optimize the performance of the rear suspension system. With its adjustable design, this bushing allows for precise tuning of suspension settings, making it an essential upgrade for both daily drivers and performance enthusiasts.

Key Benefits:

1. Precision Adjustability: The adjustable feature of this bushing allows drivers to fine-tune their trailing arm positioning, enabling adjustments to camber and toe angles. This customization is particularly beneficial for those who participate in motorsport events or track days, where suspension alignment can significantly impact performance.

2. Enhanced Handling Characteristics: Replacing factory rubber bushings with high-performance polyurethane increases the stiffness and responsiveness of the rear trailing arm. This improvement results in reduced body roll and enhanced cornering stability, providing a more dynamic driving experience.

3. Durability and Longevity: Constructed from high-quality polyurethane, these bushings are designed to withstand harsh conditions and resist wear from oil, heat, and road debris. Unlike traditional rubber bushings, they offer greater longevity and performance reliability.

4. Improved Steering Response: The firmer connection provided by these bushings enhances road feedback and steering precision. Drivers will experience a more connected feel to the road, allowing for better control and confidence during spirited driving.

5. Easy Installation: Specifically designed for the BMW E32, E34, E28, and E24, these bushings are a direct fit into the existing trailing arm mounts. Installation is straightforward and requires no modifications, making it an accessible upgrade for DIY enthusiasts.

This upgrade is ideal for BMW owners seeking to enhance the performance and adjustability of their vehicle’s suspension. The Powerflex Adjustable Rear Trailing Arm Bushing offers a robust solution for improving handling, stability, and overall driving enjoyment, making it suitable for various driving conditions.

Dinan's high-performance Rear Suspension Link Kit adds precision and predictability at the limit.

The stock rear toe link setup is built with rubber bushings and a curved forged alloy rod which can easily flex. During hard acceleration and braking, this flex allows the rear wheels to have excessive toe change which ultimately causes the car to be unstable. Dinan stops the flex by replacing the rubber bushings with Teflon-lined machined steel rod ends that significantly reduce pliability while also swapping out the OEM curved bar with a stouter billet aluminum arm, thus adding stability. Like the rear toe links, the stock front trailing links also incorporate rubber bushings. Flex in these bushings allows the rear wheels to behave sloppily under heavy loads. Dinan adds precision by replacing these links with billet aluminum arms and precision ball joints just like the ones found in the Dinan front monoball kit.

Have confidence in your F90 M5 when pushing the envelope without worry of erratic suspension play or sacrificing ride quality and comfort. Whether it be at the drag strip doing quarter mile runs or simply getting the jump off the line at a stop light the end result with Dinan's Rear Suspension Link Kit is a more stable and planted driving experience when pushing the car to its limits.

Benefits of the Dinan Rear Suspension Link Kit for the BMW F90 M5:

Replaces the stock rear toe link & rubber bushings with a precision machined black-anodized aluminum arm and racing-quality rod ends.
Rod-ends are Teflon-lined for quiet operation.
Rubber boots protect rod ends from environmental damage for long-lasting performance and removes the need for constant cleaning.
Replaces the stock forward lower trailing link & rubber bushings with a precision machined black-anodized aluminum arm and precision ball joints.
Bearings are nylon-lined for quiet operation.
Dramatically improves vehicle stability during hard cornering.
Improves response by eliminating the deflection of the rubber bushings.

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs