Find Parts That Fit Your Vehicle

BMW Transmission Parts

Looking for parts for your BMW automatic transmission or manual transmission? You'll find many of the parts available to service your BMW's transmission here. While internal transmission servicing and rebuilding should be done by professionals, there are a lot of things on the outside of the transmission that you can service or replace yourself. These include gearbox seals, o-rings, gaskets, automatic transmission filters, backup light switches, mounting bolts, flanges, collar nuts, screw plugs, Mechatronics, and more.

Sub-Categories

Sort By:
E36 GS6-37 6 Speed Conversion Shifter Carrier - Black
E36 GS6-37 6 Speed Conversion Shifter Carrier - Black
Reboot Engineering - Corporate Logo
T#:1135813
Part#: GS6-37SHIFTCARBL
In Stock
$ 374.99 USD
Free Shipping
Add to Wish List
$ 374.99 USD
Free Shipping
Add to Wish List
This part is used when converting an E36 to a 6 speed when using a ZF GS6-37 transmission that is commonly found in an E46 330. The part is necessary for the conversion to ensure that the shifter correctly aligns with the hole in the transmission tunnel. This part only works with 6 cylinder cars. This kit requires front carrier bushings (BMW Part Number 25117519670). The machined components are constructed of 6061 Aluminum.
Show More Show Less
GS6-37 6 Speed Conversion Transmission Bracket - E36
GS6-37 6 Speed Conversion Transmission Bracket - E36
Reboot Engineering - Corporate Logo
T#:1135812
Part#: GS6-37TRANSBRACK
In Stock
Sale - Save 7% $ 279.00

This product was last offered at the strikethrough price on
05-03-2026

$ 260.40 USD
Free Shipping
Add to Wish List
Sale - Save 7%
$ 279.00

This product was last offered at the strikethrough price on
05-03-2026

$ 260.40 USD
Free Shipping
Add to Wish List
This part is used when converting an E36 to a 6 speed when using a ZF GS6-37 transmission that is commonly found in an E46 330. This adapter raises the rear trans mount 30mm and eliminates the need to run spacers with an E36 auto cross-member. Components are constructed of 6061 Aluminum.
Show More Show Less
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - BMW 2010+
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...
PPE - Corporate Logo
T#:1002349
Part#: 228053410
Back Ordered
$ 314.99 USD
Free Shipping
Add to Wish List
$ 314.99 USD
Free Shipping
Add to Wish List
When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
Show More Show Less
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW 2010+
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...
PPE - Corporate Logo
T#:1002348
Part#: 228053400
Back Ordered
$ 296.99 USD
Free Shipping
Add to Wish List
$ 296.99 USD
Free Shipping
Add to Wish List
When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
Show More Show Less
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BMW 2010+
PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...
PPE - Corporate Logo
T#:1002350
Part#: 228053420
Back Ordered
$ 314.99 USD
Free Shipping
Add to Wish List
$ 314.99 USD
Free Shipping
Add to Wish List
When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED
Show More Show Less
VTT Plug And Play Wireless Xdrive Controller - BMW G01/02 G05 G06 G14/15/16 G2X G42
VTT Plug And Play Wireless Xdrive Controller - BMW G01/02 G05 G06 G14...
Vargas Turbo Technologies - Corporate Logo
T#:30497148
Part#: VTT-XDRIVE-CONTR
In Stock
$ 208.99 USD
Free Shipping
Add to Wish List
$ 208.99 USD
Free Shipping
Add to Wish List
VTT now offers the ONLY easy-to-install, plug-and-play xDrive controller on the market. This device will allow you to turn off and on your xDrive capability from the driver's seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. VTT's solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping