Rear Sway Bar

Steel Sway Bar Bracket Upgrade Kit - E39 5-Series

Offers superior strength vs the OE bracket!

T#:1002338

Part#: 33552283159SKT

In Stock

Sale - Save 11% $ 109.99

This product was last offered at the strikethrough price on
06-14-2026

$ 98.17 USD

Add to Wish List

Qty

Sale - Save 11%

$ 109.99

This product was last offered at the strikethrough price on
06-14-2026

$ 98.17 USD

Add to Wish List

Includes both brackets and all new installation hardware. The stock aluminum sway bar brackets in the E39 5-Series suffer from a serious design flaw that has resulted in many people experiencing snapping and misshapen brackets, a mounting tab that is simply too weak. Not only was the OE bracket not designed to handle the loads required, but the aluminum construction was also easily fatigued over time, making an already questionable bracket weaker over time. This sub-par construction eventually leads to the mounting tab breaking off, releasing all tension on the sway bar, causing sloppy handling feel and knocking noises in the rear of your BMW. Luckily for all of us, the fix is simple. By swapping the construction from aluminum to steel, while maintaining all of the original dimensions, these brackets offer 3 times the mounting strength versus the OE brackets! This ensures that no matter how many track days or spirited weekends of driving your BMW sees, you can rest easy knowing your rear sway bar is securely mounted. To top it all off, these brackets are also zinc-coated, keeping away rust and corrosion for years. Why go steel E39 brackets instead of using E38 brackets? Fitment. Although the E38 bracket is a commonly suggested upgrade, it does require a bit of modification to fit properly and usually results in a bit of bushing compression, making your sway bar difficult to install.

Show More Show Less

Turner Motorsport- Upgraded Rear Sway Bar (21mm) - E46 Non M ...

T#:303251

Part#: E46-R21-SWAY

In Stock

Sale - Save 18% $ 322.99

This product was last offered at the strikethrough price on
05-03-2026

$ 265.56 USD

Add to Wish List

Qty

Sale - Save 18%

$ 322.99

This product was last offered at the strikethrough price on
05-03-2026

$ 265.56 USD

Add to Wish List

Turner Oversized Rear Sway Bar - F2x/F3x

T#:555390

Part#: 024452TMS01

In Stock

$ 501.99

This product was last offered at the strikethrough price on
05-03-2026

$ 313.99 USD

Add to Wish List

Qty

$ 313.99 USD

Add to Wish List

Experience less body roll, massive improvements to the handling characteristics of your vehicle, and virtually no sacrifice in ride quality with this 22mm Adjustable Rear Sway Bar.

Steel Sway Bar Bracket - Single - E39 5-Series

Offers superior strength vs the OE bracket!

T#:1002335

Part#: 33552283159

In Stock

Sale - Save 10% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.99 USD

Add to Wish List

The stock aluminum sway bar brackets in the E39 5-Series suffer from a serious design flaw that has resulted in many people experiencing snapping and misshapen brackets, a mounting tab that is simply too weak. Not only was the OE bracket not designed to handle the loads required, but the aluminum construction was also easily fatigued over time, making an already questionable bracket weaker over time. This sub-par construction eventually leads to the mounting tab breaking off, releasing all tension on the sway bar, causing sloppy handling feel and knocking noises in the rear of your BMW. Luckily for all of us, the fix is simple. By swapping the construction from aluminum to steel, while maintaining all of the original dimensions, these brackets offer 3 times the mounting strength versus the OE brackets! This ensures that no matter how many track days or spirited weekends of driving your BMW sees, you can rest easy knowing your rear sway bar is securely mounted. To top it all off, these brackets are also zinc-coated, keeping away rust and corrosion for years. Why go steel E39 brackets instead of using E38 brackets? Fitment. Although the E38 bracket is a commonly suggested upgrade, it does require a bit of modification to fit properly and usually results in a bit of bushing compression, making your sway bar difficult to install.

Show More Show Less

SpecE46 Turner Motorsport Sway Bar Set

T#:340451

Part#: SE46-SWAYBARS

In Stock

Sale - Save 3% $ 608.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 590.72 USD

Add to Wish List

Sale - Save 3%

$ 608.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 590.72 USD

Add to Wish List

We put together this special sway bar set for the SpecE46 racing class (SE46) and any other E46 that gets heavy track time. We use the 30mm M3 front bar combined with the 21mm E46 non-M rear bar. From our time racing the E46 in World Challenge, Grand-Am, and SCCA club racing we found that the E46 likes a stiffer sway bar and less spring rate. Taking the M3 front bar, which is solid, is exactly what we wanted. They are adjustable in the front (3-position) and the rear (2-position) to fine tune the handling. Bushings are included and new adjustable links are optional. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

Setup: The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there. When using these in a non-SE46 setup (or other struts beside MCS) the strut housing may have to be rotated in the spindle so that the sway bar link lines up better with the sway bar tab on the strut.

Adjustable sway bar links are strongly advised to ensure that there is no pre-load on the bars. And to position the bar so that it has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car, from differing ride heights or from the chassis being slightly twisted. With the SE46 coil overs the adjustable links are a smart idea. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable front or rear links can be added from the options listed below.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2001-2006 SpecE46 BMW 330i 330ci

Show More Show Less

Turner E46 M3 25mm Rear Sway Bar Bushing (Each)

T#:390032

Part#: 53110037

In Stock

Sale - Save 19% $ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 19%

$ 71.99

This product was last offered at the strikethrough price on
06-13-2026

$ 57.99 USD

Limited Qty Sale

Add to Wish List

Replacement rear sway bar bushing for Turner E46 M3 25mm rear sway bar. This is one bushing (they are sold individually) and only fits on the Turner 25mm rear sway bar.

Turner Motorsport Rear 22mm Sway Bar Upgrade Kit - F30 RWD

T#:585235

Part#: 024452TMS05

Ships on Oct 23, 2026

Sale - Save 10% $ 529.99

This product was last offered at the strikethrough price on
06-14-2026

$ 476.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 529.99

This product was last offered at the strikethrough price on
06-14-2026

$ 476.99 USD

Add to Wish List

Reduce under-steer and body roll

Genuine BMW Rear Sway Bar Upgrade kit - 19mm - E34

T#:596994

Part#: 33552227005KT

Back Ordered

$ 505.99 USD

Add to Wish List

Qty

$ 505.99 USD

Add to Wish List

Looking to upgrade your rear sway bar? This Genuine BMW sway bar from the European M5 Nurburgring handling package features a 19mm diameter for increased handling performance and reduced body roll.

Genuine BMW Stabilizer, Rear - D=19mm
Fits the following BMW chassis:
E34 BMW

Show More Show Less

Rear Sway Bar With Ploy Bushings - 22mm Black

T#:6795779

Part#: 2128222B

Special Order: No Guaranteed ETA

$ 275.00 USD

Add to Wish List

Qty

$ 275.00 USD

Add to Wish List

MINI Cooper F55-F56-F57 Rear Anti-Roll Bar | Sway Bar By MAXX-G Perfo...

T#:29002128

Part#: 70-520122

Ships in 4 Business Days

$ 364.99 USD

Add to Wish List

Qty

$ 364.99 USD

Add to Wish List

Rear Sway Bar With Ploy Bushings - 22mm

T#:6795778

Part#: 2128222O

Special Order: No Guaranteed ETA

$ 275.00 USD

Add to Wish List

Qty

$ 275.00 USD

Add to Wish List

M7 R60 r61 2" Lifted Suspension | Stage 2 Kit

T#:29002168

Part#: 60-555219

Ships in 4 Business Days

$ 1,015.99 USD

Add to Wish List

Qty

$ 1,015.99 USD

Add to Wish List

M7 R60 R61 Countryman / Paceman Rear Sway Bar - 19mm Solid

T#:26305132

Part#: 60-520119

In Stock

$ 315.99 USD

Add to Wish List

Qty

$ 315.99 USD

Add to Wish List

Introducing the MAXX-G™ Performance Suspension rear anti-roll bars, also known as sway bars, tailored for the R60 Countryman and R61 Paceman. Engineered for MAXIMUM GRIP and MAXIMUM CORNERING G-FORCE, MAXX-G™ suspension components are designed to elevate the performance and thrill of your Mini. The ANTI-ROLL-KITs effectively reduce body roll, enhancing handling and cornering grip for an exhilarating driving experience. Key features include:

Reduction of body roll through increased stiffness over stock bars.
Improved handling and cornering grip in various driving scenarios.
Shifts handling balance from understeer towards neutral for enhanced fun.
Three sets of link connection points for precise handling adjustments.
Made in the USA from military-grade 4130 chrome-moly alloy steel.
Double-coated with durable HOT YELLOW powder coat for longevity.
Includes high-performance urethane bushings, strap clamps, silicone grease, and locking split collars.

Complete your suspension upgrade with the MAXX-G™ ANTI-ROLL-KIT for unparalleled performance and driving pleasure.

Show More Show Less

MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1 Standard...

T#:28770026

Part#: 60-555922

Ships in 4 Business Days

$ 859.99 USD

Add to Wish List

Qty

$ 859.99 USD

Add to Wish List

Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.