Turner Motorsport BMW Cooling System Parts & Accessories

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E46 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install.

If your BMW needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Product Features:

Maintains stock coolant capacity and expansion volume
Designed to maintain OE coolant elevation, preventing air pockets
Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading
Carefully designed bleed passage prevents the introduction of air as the engine cools
Turner engraved internal fill level
TIG welded 5052 aluminum construction
All bungs are machined to fit factory hose ends
Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Flared coolant pressure release line
Hardware for installation
Product Development:

Turner expansion tanks are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E46 M3 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E46 M3 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your E46 M3 today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Whether your S55-equipped BMW serves as a daily driver or track car, keeping temperatures cool is critical. While most enthusiasts focus on upgrading the radiator and water-to-air intercooler systems, the engine oil cooler is an overlooked yet critical component.

New for the F8X-generation M2, M3, and M4 is a low-slung, horizontally mounted oil cooler designed to harness underbody aerodynamics. By placing the cooler in a low-pressure zone, this design enhances airflow efficiency and achieves sustainable oil temperatures for stock and street-driven cars. However, the compact core is quickly overwhelmed on modified or track-driven vehicles. Its exposed mounting position also leaves it highly susceptible to impact damage, so a minor scrape or piece of road debris can mean a costly full replacement. If you’re already replacing your oil cooler, it’s the perfect time to upgrade!

Our engineering team set out to solve the shortcomings of the factory design by developing a larger, higher-capacity core that delivers measurable gains in thermal stability. With a 7% increase in core thickness over OEM, this upgraded unit enhances airflow through the cooler and helps maintain lower, more consistent oil temperatures under sustained load. Thanks to its robust bar-and-plate core, precision-formed sheet metal end tanks, and durable 5052 aluminum construction, it’s built to withstand the harsh realities of real-world performance driving.

Replaces OEM part numbers 17212284540 and 17214802333.

Features:

High-efficiency bar-and-plate core for superior heat dissipation Fully TIG-welded 5052 aluminum end tanks Retains OEM rubber mounting for vibration-isolated, factory-style fitment Black painted finish with laser-etched Turner logo Designed as a direct-fit replacement and upgrade for S55-equipped F8X vehicles Design:

7% thicker core (30mm vs 28mm) for increased thermal capacity 6.5% increase in finned area (104,000 mm² vs 97,650 mm²) for better cooling Compatible with the Turner Motorsport skid plate kit (ES#3448772, ES#3247792) for complete protection Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

BMWs are well-known for their problematic cooling systems, which are often the cause of irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory F8X expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for F80 M3, F82/F83 M4, and F87 M2 Competition owners: a heavy-duty expansion tank that is built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, our design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your S55-equipped BMW today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Proprietary Coolant Level Sensor with Wiring Harness Adapter: Provides a plug-and-play, CEL-free functionality. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose 6mm Nipple Fitting Expansion Tank Cap Coolant Level Sensor Coolant Level Sensor Wiring Harness Adapter

BMWs are well-known for their problematic cooling systems, which are often a catalyst for irreversible engine damage and a hefty repair bill. The coolant expansion tank—a crucial component responsible for holding hot engine coolant under high pressure—is a common cause of cooling system issues. Unfortunately, BMW chose to manufacture the factory E9X N55 expansion tank out of plastic. After years of exposure to high coolant temperatures, ambient engine bay heat, and chemical-rich antifreeze, the plastic degrades, eventually weakening enough to fail catastrophically.

With this issue in mind, our team of BMW enthusiasts engineered the ultimate cooling system upgrade for E82/88 and E90/92/93 owners: a heavy-duty expansion tank built to last! Crafted from durable 5052 TIG-welded aluminum, this tank resists high temperatures and pressures without degrading over time. Unlike the fragile OEM plastic tank, Turner’s design eliminates the risk of cracking, leaking, or failure. Upgrade to our Heavy Duty Aluminum Expansion Tank Kit and say goodbye to expansion tank issues for good!

To guarantee exact fitment, the upgraded tank was designed using advanced 3D CAD modeling. All bungs, nipples, and fittings are precision-machined to ensure a secure seal with factory hose ends. Unlike other aftermarket options, this tank maintains the factory coolant capacity and includes our laser-cut logo plate at the top, providing an accurate fill level. Internal baffles are incorporated to prevent fluid cavitation, eliminating air pockets in the cooling system and avoiding false coolant level warnings during spirited driving.

Engineered for high-performance builds and daily drivers alike, this expansion tank boasts a premium wrinkle black powder coat finish for a clean "OEM+" aesthetic. This tough coating not only enhances appearance but also protects against corrosion for long-term durability. The kit includes a silicone overflow hose, a high-quality level sensor, and an OE expansion tank cap, offering a complete cooling system upgrade. Avoid the risks of the factory expansion tank—upgrade your N55-equipped BMW today and drive with confidence!

Features & Benefits:

Durable 5052 TIG-Welded Aluminum Construction: Ensures long-term reliability and eliminates expansion tank failure. Premium Wrinkle Black Powder Coat Finish: Offers an "OEM+" appearance while preventing corrosion. Factory Coolant Capacity Retention: Maintains the same coolant level as the original design. Laser-Cut Turner Logo Plate: Provides a clear and accurate fill level indicator. Internal Baffles: Prevent the introduction of air pockets during high-performance driving. Precision-Machined External Bungs and Fittings: Ensure a perfect fit for factory hose connections. Kit Includes:

Turner Motorsport Aluminum Expansion Tank Performance Silicone Coolant Overflow Hose Aluminum Coolant Bleeder Screw Ball Stud 6mm Fitting Expansion Tank Cap Coolant Level Sensor Product Development:

Our Heavy Duty Aluminum Expansion Tank was designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Installation:

To aid in the installation process, we've assembled a start-to-finish installation guide, including detailed instructions on removing your factory cooling expansion tank and associated components.

Click HERE for Installation Instructions

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Ditch your failure-prone plastic end tanks and increase cooling capacity by 25%—all without modifying your core support or accompanying shrouds. This Performance Triple-Pass Radiator is the ULTIMATE cooling system upgrade for your S54-equipped BMW!

The E46 M3 is a masterclass in German engineering. Harboring six independent throttle bodies, infinitely variable dual-VANOS, and an 8,000 RPM redline, the S54 is practically a racing engine for the road. Unfortunately, the engine's motorsport pedigree didn't quite make it to the cooling system. The OEM radiator, while superior to its non-M counterpart, struggles to keep coolant temperature in check under sustained high-RPM conditions. Heat soak, elevated operating temperatures, and component fatigue are all too familiar to M3 owners who track their S54 regularly.

To solve this problem, we teamed up with CSF Race, a global leader in high-performance cooling solutions with over five decades of industry experience. Together, we developed the CSFxTurner Triple-Pass Radiator: a high-performance, no-compromise solution built to meet the cooling demands of track-day warriors.

Part Design:

CSF-Exclusive "B-Tube" Technology Unlike conventional "O-tube" designs, CSF’s patented B-tube structure increases wall strength while creating a more efficient flow path. This alone accounts for a 15% increase in cooling capacity over an OE "o-tube" radiator! Triple-Pass Core Design As the name suggests, this unique structure forces coolant through the core three times before exit, resulting in a substantial temperature delta across the radiator core. Two-Row Compact Structure This radiator was designed with precise fitment in mind. While total tube count and size are increased, the overall radiator dimensions stay the same as OE, ensuring a drop-in fit with zero modifications required. 25% Increase in Cooling Capacity All of the above design features translate to a massive 25% cooling increase over the stock radiator! Features & Performance Benefits:

Direct-fit upgrade—no modifications required! Accepts all OEM attachments via CNC-machined "Quick-Connect" hose ends and accessory mounting provisions TIG-welded aluminum construction provides increased durability An all-aluminum drain plug replaces the weak OE plastic unit, ensuring seamless functionality for the life of the radiator Increased cooling efficiency for high-performance and racing use Designed and tested by Turner Motorsport in collaboration with CSF Race

BMWs turbocharged S55 engine uses a water-to-air charge air cooling system, with a front-mounted heat exchanger responsible for heat dissipation. Unfortunately, the factory single-row, 27mm core design is quick to heat soak under high load, leading to excessive intake air temperatures and potential limp mode conditions especially on modified or track-driven cars.

To solve this issue, we've developed a drop-in upgrade over the factory unit. Engineered for durability and maximum cooling efficiency, this heat exchanger is a must-have for high-horsepower street builds, spirited canyon driving, and extended track sessions. Built from TIG-welded 5052 aluminum, our design eliminates the factory plastic end tanks one of the systems most common failure points. Each heat exchanger features CNC-machined billet aluminum hose connections, mounting flanges, and brackets for perfect OE fitment and trouble-free installation.

By replacing the OEM 27mm single-row core with a robust 35mm dual-row design, this heat exchanger dramatically increases both cooling capacity and surface area. Frontal area jumps from 307mm to 475mm, resulting in a 100% increase in coolant volume and significantly improved heat-soak resistance. The outcome? Lower, more stable charge air temperatures that help your S55 deliver consistent, reliable power on the street or at the track.

Replaces OEM part numbers 17112284608 and 17112459062.

Features:

5052 aluminum construction eliminates plastic end tank failures A performance-oriented, dual-row core provides a 55% increase in frontal surface area, and a 100.29% increase in coolant volume over the OE heat exchanger! OE Heat Exchanger: Single-row core 27mm core thickness 307mm core height ECS High Performance Aluminum Heat Exchanger: Dual-row core 35mm core thickness 475mm core height TIG-welded 5052 aluminum end tanks, polished to a mirror finish for a high-quality look CNC-machined connectors and bracketry ensure seamless fitment with factory cooling hoses, transmission cooler lines, condenser, and radiator Drop-in upgrade - no modifications required for installation! Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

BMW's newest high-performance powertrain—the S58B30—has proven to be an extremely durable platform built to last! Unfortunately, its factory oil cooler location is an egregious weak link in an otherwise bulletproof oiling system. Positioned just inches above the ground, the engine oil cooler is vulnerable to damage from debris, potholes, parking blocks, and other unavoidable road hazards. A single impact has the potential to rupture the cooler’s delicate aluminum fins and tubes, resulting in rapid oil loss and catastrophic low oil pressure. The only factory protection for this part is a flimsy undertray.

To safeguard the oil cooler, we've engineered a high-strength Aluminum Skid Plate for the F97 X3M and F98 X4M. Designed for peak performance and protection, our skid plate acts as a shield, preventing damage to the oil cooler while maintaining proper cooling efficiency.

Crafted from 4GA (4.83mm) 5052 aluminum, our skid plate delivers a perfect balance of strength and weight savings. Unlike the fragile factory plastic belly pan, our design forms a protective barrier from the front bumper to the front subframe, shielding your oil cooler and other fragile componentry from unexpected impacts. Its sturdy one-piece design enhances underbody rigidity without adding unnecessary weight over the front axle.

At Turner Motorsport, we believe protection shouldn't come at the cost of performance. Our engineers aimed to outperform the factory undertray design with laser-cut air channels that optimize airflow through the oil cooler. While located under the engine, the oil cooler receives its fresh airflow from the front air dam. Air flows through the lower front grille, into the oil cooler core, and out of the skid plate. The factory belly pan allows air to bypass the core, leading to inefficient cooling and mediocre airflow at speed. Our design allows for efficient heat dissipation by incorporating flared air channels, which guide cool air through the oil cooler and deflect road debris before it can reach the fragile core.

Upgrade your F97 X3M or F98 X4M with the Turner Motorsport Aluminum Skid Plate for added protection, durability, and performance.

Features & Benefits:

Forward-angled leading edge: Deflects road debris before it can reach critical components Rear-facing flared air channel: Ensures efficient ventilation and heat dissipation Heavy-duty 5052 aluminum construction: Tougher than stock, lightweight design Premium Wrinkle Black Powdercoat: Provides a resilient, yet brilliant-looking finish Optimized airflow channels: Keeps your oil cooler running at peak efficiency Reinforced protection: Shields vital engine components from road debris Factory mounting points: 100% bolt-on or off, no modifications needed Made in the USA: Engineered for quality and durability Kit Includes:

Turner Motorsport Aluminum Skid Plate – Wrinkle Black Hex Bolts (2) – SN5x35mm C-Clip Inserts (2) 6mm Skid Plate Spacers (2) Installation & Support:

For your convenience, we've provided a step-by-step installation guide, including detailed removal instructions, bolt locations, and torque values.

Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.

Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.

Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!

Tired of dealing with brittle, dry-rotted rubber hoses? Whether you're refreshing your cooling system or replacing aging components, our Silicone Radiator Coolant Hose Set is the ultimate upgrade. Designed for durability, performance, and a factory-perfect fit, these premium silicone hoses outperform standard rubber in every way.

Why Choose Silicone Over Rubber?

Made from heavy-duty, reinforced 4-ply fluorosilicone, Turner Motorsport hoses withstand extreme temperatures and pressures far beyond OEM rubber hoses. Engineered to resist oil, fuel, and electrochemical degradation, these hoses are tested for continuous operation at 250°F and over 45 psi, delivering superior reliability, reduced turbulence, and improved coolant flow.

Replaces OEM Part Numbers: 17127596837 & 17127596838. Pre-assembled with factory "quick-connect" hose ends for easy installation!