Steering

BMW E24 E28 E32 E34 Steering Universal Flex Joint

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:371379

Part#: 32311150489

In Stock

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

BMW E24 E28 E32 E34 Steering Universal Flex Joint is designed to prevent engine compartment vibrations from reaching the steering wheel. This essential component minimizes steering wheel clunk and vibrations that can be felt at idle and during driving, ensuring a smoother and more comfortable driving experience.

Vibration Reduction: Effectively absorbs vibrations from the engine compartment, improving driving comfort.
Restores Steering Smoothness: Eliminates clunking noises and steering wheel shake, enhancing overall driving quality.
Direct Fit Replacement: Designed to fit exactly like the stock part, ensuring seamless integration and performance.
Easy Installation: Simple process of unbolting the old unit and installing the new one, making it an accessible upgrade.

Replacing the steering universal flex joint with this high-quality part from Turner Motorsport will restore comfort and smoothness to your BMW, making every drive more enjoyable.

Show More Show Less

Tie Rod Assembly - Right Side

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:371374

Part#: 32211701040

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

The tie rods in your vehicle translate the movement of the steering wheel through the rack and to your wheels. Oftentimes when a vehicle is beginning to experience some higher mileage, the tie rod ends begin to fail. This causes slop in the steering wheel and knocks and creaks in the steering system. Catastrophic tie rod end failure can cause serious damage and danger as the tie rod end keeps the wheel path straight. Replace your tie rods for some cheap insurance against dangerous failures. These tie rod ends will offer dramatic improvements over worn original units. Tighter, quieter steering and a more responsive wheel can be expected. A great way to stay safe on the road. By replacing both inner and outer in an assembly, alignment will be easier as all parts are new and tight. A great way to address all issues associated with your steering.

Show More Show Less

BMW E30 Tie Rod Assembly - Left Side

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:371373

Part#: 32211701039

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

The tie rods in your vehicle translate the movement of the steering wheel through the rack and to your wheels. Oftentimes when a vehicle is beginning to experience some higher mileage, the tie rod ends begin to fail. This causes slop in the steering wheel and knocks and creaks in the steering system. Catastrophic tie rod end failure can cause serious damage and danger as the tie rod end keeps the wheel path straight. Replace your tie rods for some cheap insurance against dangerous failures. These tie rod ends will offer dramatic improvements over worn original units. Tighter, quieter steering and a more responsive wheel can be expected. A great way to stay safe on the road. By replacing both inner and outer in an assembly, alignment will be easier as all parts are new and tight. A great way to address all issues associated with your steering.

Show More Show Less

Carbon Fiber Outer Steering Wheel Trim

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:585167

Part#: ATK-BM-0283-60

Ships in 7 Business Days

$ 280.00 USD

Add to Wish List

Qty

$ 280.00 USD

Add to Wish List

Customize your M Steering wheel with Carbon Fiber Trim

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - F97 X3M/F9...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175749

Part#: ATK-BM-0282-H-S

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F97 X3M and F98 X4M composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.

Show More Show Less

Power Steering Pressure Hose

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6460326

Part#: 32411134436

Back Ordered

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Power steering hoses are responsible for maintaining a lot of pressure, and even a small leak can prove catastrophic. Old hoses should be replaced as soon as possible to prevent damaging leaks.

Steering Rack Lock Plate - secures tie rod to steering rack

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:579064

Part#: 1927

In Stock

$ 4.07 USD

Add to Wish List

Qty

$ 4.07 USD

Add to Wish List

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - G30 5-Seri...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2017-2019

T#:5175759

Part#: ATK-BM-0282-G30H

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.

Show More Show Less

AutoTecknic Carbon Alcantara Steering Wheel Trim - Non Heated Wheel -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39092992

Part#: BM-0282-NH-S

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

The carbon fiber steering wheel trim for the F90 M5; it's for the 2018-2019 line of F90 M5. Made with durable OEM spec material and skillfully wrapped in 3K Twill weave carbon fiber and finished off with luxury Alcantara.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - G30 5-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2020+

T#:5175758

Part#: ATK-BM-0282-G30N

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - F90 M5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175762

Part#: ATK-BM-0282-HF90

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - F97 X3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175741

Part#: ATK-BM-0282-NH-S

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F97 X3M and F98 X4M composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.

Show More Show Less

AutoTecknic Carbon Alcantara Steering Wheel Trim - Heated Steering Wh...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39092993

Part#: BM-0282-H-S

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

The carbon fiber steering wheel trim for the F90 M5; it's for the 2018-2019 line of F90 M5. Made with durable OEM spec material and skillfully wrapped in 3K Twill weave carbon fiber and finished off with luxury Alcantara.

Show More Show Less

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - G11/G30/G32 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175781

Part#: ATK-BM-0275-G30

Ships in 7 Business Days

$ 375.00 USD

Add to Wish List

Qty

$ 375.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the G11 7-series, G30 5-series, and G32 6-series GT composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - G30 5-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2017-2019

T#:5175751

Part#: ATK-BM-0282-NG30

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.

Show More Show Less

AUTOTECKNIC Carbon Fiber Pole Position Shift Paddles - BMW G-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14419851

Part#: BM-0418

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Nominated as one of the 'must-mods' by owners around the world. This is for a set of AutoTecknic Carbon Fiber Pole Position Shift Paddles for the BMW G80 M3 and the G82 M4. It's a direct replacement for the OEM flat chrome surface shift paddles. As purists, we understand all car enthusiasts' goals—to go as fast as possible while maintaining safety and a comfortable position in the pilot's seat simultaneously. When it comes to piloting a vehicle, the driver is at optimum control when they become one with the car. These extended pole position paddle shifters were developed to make that concept a reality. Satisfy your carbon needs with these carbon paddles!

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel - F97/F98/G01/G02 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175765

Part#: ATK-BM-0114

Ships in 7 Business Days

$ 1,400.00 USD

Add to Wish List

Qty

$ 1,400.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a replacement steering wheel for the F97 X3M, F98 X4M, and all G01 and G02 models composed of 3k twill weave carbon fiber and finished accents with alcantara. Perfect if your wheel has been damaged, faded, or you are looking to upgrade from OEM! Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required.

Show More Show Less

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - F95 X5M/F96 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175776

Part#: ATK-BM-0273F9X

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the F95 X5M and F96 X6M composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - F90 M5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175761

Part#: ATK-BM-0282-NHF9

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for non-heated steering wheels.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel - F90 M5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175770

Part#: ATK-BM-0116

Ships in 7 Business Days

$ 1,400.00 USD

Add to Wish List

Qty

$ 1,400.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a replacement steering wheel for the F90 M5 composed of 3k twill weave carbon fiber and finished accents with alcantara. Perfect if your wheel has been damaged, faded, or you are looking to upgrade from OEM! Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required.

Show More Show Less

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - F90 M5 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5175780

Part#: ATK-BM-0273

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed a steering wheel top cover trim for the F90 M5 composed of 3k twill weave carbon fiber. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - G30 5-Seri...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2020+

T#:5175760

Part#: ATK-BM-0282G30H2

Ships in 7 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed steering wheel trim for the G30 5-series and G32 6-Series GT composed of 3k twill weave carbon fiber and finished accents with alcantara. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced. Autotecknic recommends professional installation as removal of the steering wheel is required. *Note: This version is for heated steering wheels.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

BMW E24 E28 E32 E34 Steering Universal Flex Joint

Tie Rod Assembly - Right Side

BMW E30 Tie Rod Assembly - Left Side

Carbon Fiber Outer Steering Wheel Trim

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - F97 X3M/F9...

Power Steering Pressure Hose

Steering Rack Lock Plate - secures tie rod to steering rack

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - G30 5-Seri...

AutoTecknic Carbon Alcantara Steering Wheel Trim - Non Heated Wheel -...

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - G30 5-...

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - F90 M5 ...

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - F97 X3...

AutoTecknic Carbon Alcantara Steering Wheel Trim - Heated Steering Wh...

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - G11/G30/G32 ...

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - G30 5-...

AUTOTECKNIC Carbon Fiber Pole Position Shift Paddles - BMW G-Chassis ...

Autotecknic Carbon Alcantara Steering Wheel - F97/F98/G01/G02 ...

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - F95 X5M/F96 ...

Autotecknic Carbon Alcantara Steering Wheel Trim(Non-Heated) - F90 M5...

Autotecknic Carbon Alcantara Steering Wheel - F90 M5

Autotecknic Carbon Fiber Steering Wheel Top Cover Trim - F90 M5 ...

Autotecknic Carbon Alcantara Steering Wheel Trim(Heated) - G30 5-Seri...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results