Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Whiteline - Corporate Logo
T#:558797
Part#: W61923
In Stock
$ 77.99 USD
Free Shipping on orders $49 and up

Optimize rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement - providing driver reassurance for more predictable handling.

Features:

  • Performance - Whiteline's engineered "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling.
  • Durable - The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications!
  • Resistant - Whiteline's synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering
  • Lubricant - Supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life.
  • Installer Friendly - Designed with the installer in mind by reducing the need of specialized skills, tools and equipment.
  • Black - The neutral (black) appearance favored by restorers and racers.
  • Lifetime Warranty - All Whiteline bushing kits are backed by a lifetime warranty
Show More Show Less
Febi - Corporate Logo
T#:382082
Part#: 33326792551
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
Fits the left and right side
Whiteline - Corporate Logo
T#:379440
Part#: W63400
In Stock
$ 86.99 USD
Free Shipping
$ 86.99 USD
Free Shipping

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less

Whiteline - Corporate Logo
T#:26538301
Part#: W53518
In Stock
$ 133.99 USD
Free Shipping on orders $49 and up
Following meticulous development and material testing focused on strength, durability, geometry retention, and memory while maintaining comfort, WHITELINE has engineered a progressive, long-chain Synthetic Elastomer. This pioneering material merges the advantageous properties of solid bushings with the flexibility of rubber.
Show More Show Less

Whiteline - Corporate Logo
T#:372857
Part#: W62384
Ships in 4 Business Days
$ 118.99 USD
Free Shipping on orders $49 and up

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less
Rear Axle Upper Wishbone - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:592638
Part#: 33326768724
In Stock at Vendor
$ 69.58 USD
Free Shipping on orders $49 and up

Febi - Corporate Logo
T#:382080
Part#: 33326780438
Ships in 1-2 days
$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 51.99 USD
Free Shipping on orders $49 and up
$ 51.99 USD
Free Shipping on orders $49 and up
Located in the lower rear trailing arm
Febi - Corporate Logo
T#:374213
Part#: 33326782237
In Stock
$ 69.99 USD
Free Shipping on orders $49 and up
Located in the upper front part of the rear suspension - includes bushings and hardware.

Rear Upper Control Arm - Right
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:582903
Part#: 33326777426
In Stock
$ 103.99

This product was last offered at the strikethrough price on
02-27-2026

$ 61.99 USD
Limited Qty Sale
Free Shipping
$ 103.99

This product was last offered at the strikethrough price on
02-27-2026

$ 61.99 USD
Limited Qty Sale
Free Shipping

Febi ZHP Lower Control Arm - Left - E46, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:361941
Part#: 31122282121
In Stock
Sale - Save 16% $ 167.99

This product was last offered at the strikethrough price on
05-14-2026

$ 141.74 USD
Free Shipping
Sale - Save 16%
$ 167.99

This product was last offered at the strikethrough price on
05-14-2026

$ 141.74 USD
Free Shipping
Includes the upgraded ball joints from the Performance Package
Verkline - Corporate Logo
T#:22525950
Part#: WAS-422
In Stock
Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD
Free Shipping on orders $49 and up
Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632
Show More Show Less
Whiteline - Corporate Logo
T#:26638198
Part#: W62622
Ships in 4 Business Days
$ 60.99 USD
Free Shipping on orders $49 and up
Following thorough development and testing of materials aimed at providing strength, durability, geometry retention, and memory without sacrificing comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This innovative material combines the physical benefits of solid bushings with the flexibility of rubber, offering enhanced performance characteristics.
Show More Show Less


Front Control Arm - Left for E21
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:373780
Part#: 31121123025
Ships in 3 Business Days
$ 136.99

This product was last offered at the strikethrough price on
05-07-2026

$ 118.99 USD
Free Shipping
$ 118.99 USD
Free Shipping
The Febi Front Control Arm (Left) for E21 improves suspension stability and handling precision for superior driving performance.
Verkline - Corporate Logo
T#:22492998
Part#: WAS-424
Ships in 3 Business Days
$ 599.00 USD
Free Shipping on orders $49 and up
Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91
Show More Show Less
Febi - Corporate Logo
T#:363780
Part#: 33326770970
In Stock at Vendor
$ 122.99

This product was last offered at the strikethrough price on
06-08-2026

$ 96.23 USD
Free Shipping on orders $49 and up
$ 96.23 USD
Free Shipping on orders $49 and up
Control arm in the rear upper rear position in the rear suspension

Front Control Arm - Right
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:373781
Part#: 31121123026
Ships in 2 Business Days
$ 149.99

This product was last offered at the strikethrough price on
03-31-2026

$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
The Febi Front Control Arm (Right) enhances suspension performance, alignment, and handling precision for superior driving dynamics.

Febi Front Thrust Arm - Left - E60
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382512
Part#: 31126774825
In Stock at Vendor
$ 150.99

This product was last offered at the strikethrough price on
05-07-2026

$ 146.99 USD
Free Shipping
$ 146.99 USD
Free Shipping
Control arm with ball joint. Found in the front position
Whiteline - Corporate Logo
T#:11660864
Part#: W62625
Ships in 4 Business Days
$ 57.88 USD
Free Shipping on orders $49 and up
After comprehensive development and rigorous material testing focused on achieving strength, durability, geometry retention, and memory without compromising comfort, WHITELINE has achieved a breakthrough with its progressive, long-chain Synthetic Elastomer. This innovative material seamlessly combines the advantageous properties of solid bushings with the extreme flexibility characteristics of rubber, resulting in an unmatched balance of performance and comfort.
Show More Show Less

Febi - Corporate Logo
T#:374214
Part#: 33326782238
In Stock at Vendor
$ 76.99 USD
Free Shipping on orders $49 and up
Located in the upper front part of the rear suspension - includes bushings and harware.
Whiteline - Corporate Logo
T#:377430
Part#: KCA430
Ships in 4 Business Days
$ 115.99 USD
Free Shipping on orders $49 and up
$ 115.99 USD
Free Shipping on orders $49 and up

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less

Verkline - Corporate Logo
T#:22525951
Part#: WAS-423
Ships on Aug 31, 2026
$ 849.00 USD
Free Shipping on orders $49 and up
Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199
Show More Show Less

Febi Rear Upper Control Arm - Right - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382600
Part#: 33326767832
Ships in 2 Business Days
$ 99.99

This product was last offered at the strikethrough price on
05-07-2026

$ 87.99 USD
Free Shipping on orders $49 and up
$ 87.99 USD
Free Shipping on orders $49 and up
Direct replacement for your vehicles suspension
Febi - Corporate Logo
T#:382597
Part#: 33322347991
Ships in 2 Business Days
$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 85.99 USD
Free Shipping on orders $49 and up
$ 85.99 USD
Free Shipping on orders $49 and up
Rear position control arm with bushing
Febi - Corporate Logo
T#:382067
Part#: 33306772242
Ships in 2 Business Days
$ 101.99

This product was last offered at the strikethrough price on
05-07-2026

$ 86.99 USD
Free Shipping on orders $49 and up
$ 86.99 USD
Free Shipping on orders $49 and up
Rear position control arm with bushing


Whiteline - Corporate Logo
T#:377498
Part#: 82977
Ships in 4 Business Days
$ 89.99

This product was last offered at the strikethrough price on
08-13-2026

$ 82.99 USD
Free Shipping
$ 82.99 USD
Free Shipping

These bushings replace the stock rubber bushings and offer a better driving feel, increased lifespan, and better wheel alignment.

Rubber bushing allow for a lot more movement and are more susceptible to wear and tear from spirited driving and harsh weather conditions. Polyurethane is much more resistant to wear and is stiffer, reducing the total amount of movement that would normally affect the alignment negatively.

Show More Show Less
Febi Rear Upper Control Arm - Left - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382599
Part#: 33326767831
Ships in 3 Business Days
$ 93.99

This product was last offered at the strikethrough price on
05-07-2026

$ 82.99 USD
Free Shipping on orders $49 and up
$ 82.99 USD
Free Shipping on orders $49 and up
Direct replacement suspension component
Febi Front Lower Control Arm - Left - E60, E61
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:2047
Part#: 31126768297
Ships in 2 Business Days
$ 92.96

This product was last offered at the strikethrough price on
05-29-2026

$ 82.66 USD
Free Shipping
$ 82.66 USD
Free Shipping
NOW LOCATED UNDER T#338058

This item fits the following BMWs:
3/2006-2010 E60 5 Series BMW 525i 528i 530i 535i 545i 550i M5 & Wagons
Show More Show Less

Verkline - Corporate Logo
T#:22525957
Part#: WAS-412
Ships on Aug 31, 2026
$ 499.00 USD
Free Shipping on orders $49 and up
Verkline is proud to unveil their Front Bump Steer Adjustable Tie Rod Ends, the culmination of extensive development and rigorous testing. These cutting-edge components have undergone a meticulous journey, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with these high-performance tie rod ends. Key Advantages: User-Friendly Length Adjustability: Enthusiasts can easily fine-tune the tie rod end's length to achieve optimal corner weights without sway bar preload, ensuring even suspension heights. Enhanced Strength and Rigidity: Verkline's design guarantees increased strength and rigidity, resulting in improved handling performance. Replaceable High-Quality Uniballs: In case of ball joint wear, there's no need to replace the entire tie rod end. Verkline utilizes easily obtainable, high-quality uniballs for convenience. Noteworthy Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Links: The tie rod ends arrive pre-assembled, simplifying the installation process. Robust Full-Length Pins: Precision-machined from high-strength steel, these pins ensure durability and reliability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, these turnbuckles offer superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coil-Over Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front tie rod ends Two pairs of CNC machined Cr-Mo upright pins Thin locking nuts High-quality motorsport spherical bearings Set of pin spacers for bump steer adjustment Printed installation instructions Automotive enthusiasts can now experience the precision and performance of Verkline's Front Bump Steer Adjustable Tie Rod Ends, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. These components are designed to be compatible with OEM sway bars and coil-over setups, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less

Verkline - Corporate Logo
T#:22525953
Part#: WAS-410
Ships on Aug 31, 2026
$ 1,199.00 USD
Free Shipping on orders $49 and up
Verkline is pleased to present the Front Adjustable Caster Arm, a product that has undergone extensive development and rigorous testing. This cutting-edge component is the result of a comprehensive process, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with this high-performance caster arm. Key Benefits: Effortless Caster Adjustability: Enthusiasts can easily fine-tune their caster settings using a turnbuckle jackscrew, allowing for precise alignment customization. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, delivering improved handling performance. Consistent Geometry: With no rubber components to flex, this caster arm maintains unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings for convenience. Efficient Weight Design: Despite offering additional functionality, this caster arm maintains a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings: These bearings provide increased articulation capability, ensuring reliability. Wishbone Protection: Designed to prevent extensive side-swinging, reducing the risk of collisions with the knuckle or steering rod. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (caster arms) Two pairs of CNC billet 6082 aluminum arm mounts Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts Four high-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Caster Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Enthusiast Bundles - Corporate Logo
T#:25042496
Part#: 029309ECS01EBKT
In Stock
Sale - Save 26% $ 1,881.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,396.44 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 1,881.99

This product was last offered at the strikethrough price on
05-05-2026

$ 1,396.44 USD
Free Shipping on orders $49 and up
Upgrade your BMW E90/E92 RWD with the ECS Tuning Performance Coilover System, meticulously designed for daily drivers seeking improved performance without sacrificing comfort. Experience the smoothness of a stock setup while achieving an aggressive look and significantly enhanced handling, all at an affordable price. Key Features: Performance Coilover System: Sport-tuned, height, damping, and body adjustable suspension High-quality materials and coatings for optimal performance Perfect ride height for a dynamic appearance Spring Rates: Front 8kg/mm, Rear 12kg/mm Performance Features: 32 levels of rebound damping adjustment Monotube shocks/struts with optimized progressive rate coil springs for road-sticking grip Lowered ride height improves handling with a lower center of gravity Adjustable front bodies maintain ride height and correct spring pre-load Adjustable front and rear bodies ensure the shock operates in the correct valving range, regardless of ride height Product Design: Durable gloss black powder-coated strut and shock bodies Clear zinc-coated threaded portions for optimum corrosion protection Reflex Silver Metallic powder-coated coil springs for durability Red anodized, billet aluminum lower spring seats with locking collars for on-the-car adjustability Integrated bump stops for added protection Turner Motorsport Upgraded Thrust Arm With Pre-installed Monoball Bushings: Address the common issues with weak front thrust arm bushings in BMWs with the Turner Motorsport solution. This free upgrade offers superior durability and nearly instantaneous cornering and braking response. Features: Ball Joint / Monoball: OEM BMW sealed, greased ball joint for exceptional durability Housing: 6061-T6 anodized housing for excellent corrosion resistance Proprietary Turner designed knurled OD for a perfect fit among different thrust arm bore diameters Bearing Inserts: CNC machined 304ss for a precision fit between the ball joint and the subframe Performance: Nearly instantaneous, crisp steering and braking response Maintenance-free, long-lasting performance Improved road feel without undesirable NVH Upgrade your BMW for optimal road feel and performance, whether for daily driving or spirited adventures.
Show More Show Less

Febi Front Thrust Arm - Right - E60
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382513
Part#: 31126774826
In Stock at Vendor
$ 145.99 USD
Free Shipping
$ 145.99 USD
Free Shipping
Control arm with ball joint. Found in the front position
Febi - Corporate Logo
T#:382598
Part#: 33326767748
Ships on Nov 11, 2026
$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
Pressed into rear wheel carrier

Febi Front Straight Control Arm - Left - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363766
Part#: 31121141961
Back Ordered
$ 74.99 USD
Free Shipping
$ 74.99 USD
Free Shipping
Referred to as a wishbone

Febi Front Straight Control Arm - Right - E39
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363767
Part#: 31121141962
Back Ordered
$ 74.99 USD
Free Shipping on orders $49 and up
Referred to as a wishbone
Verkline - Corporate Logo
T#:22525955
Part#: WAS-411
In Stock
$ 999.00 USD
Free Shipping on orders $49 and up
Verkline proudly presents their Front Adjustable Camber Arm, a product that has undergone a thorough development and testing program. These state-of-the-art components have followed a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with this high-performance camber arm. Key Advantages: Effortless Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings using a turnbuckle jackscrew, enabling precise alignment adjustments. Roll Center Adjustability: These camber arms offer roll center adjustability with spacers, providing greater control over the vehicle's handling dynamics. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these camber arms maintain unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings and Uniballs: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings and uniballs for convenience. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Robust, Adjustable Xenon Sensor Mounting: Designed for versatility and durability, offering compatibility with xenon sensors. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle, Subframe, and Xenon Sensor Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (camber arms) Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts High-quality motorsport spherical bearings and uniballs Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Set of pin spacers for roll center adjustment Adjustable xenon sensor mounting Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Camber Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. To optimize roll center, it's recommended to add spacers on the front toe link, which can be achieved using Verkline's bump steer adjustable tie rod ends. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Ball Joint Snap Ring - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363178
Part#: 33321091687
In Stock
$ 1.09 USD
Free Shipping on orders $49 and up
One required per ball joint


Lower Control Arm / Wishbone With Ball Joint - Left
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:582752
Part#: 31126772301
In Stock
$ 126.99

This product was last offered at the strikethrough price on
03-20-2026

$ 93.99 USD
Free Shipping
$ 93.99 USD
Free Shipping
Whiteline - Corporate Logo
T#:26638279
Part#: KTA255
In Stock
$ 698.99

This product was last offered at the strikethrough price on
07-23-2026

$ 648.99 USD
Free Shipping on orders $49 and up
$ 648.99 USD
Free Shipping on orders $49 and up

BMW E46 E9X Control Arm - Lower Arm offers a convenient and high-performance solution for those replacing suspension components. Instead of dealing with the time-consuming and potentially challenging task of replacing bushings and ball joints separately, this control arm provides an all-in-one replacement. It comes equipped with market-leading Whiteline synthetic elastomer bushings and high-quality ball joints (where applicable), ensuring durability and superior handling.

  • Includes market-leading Whiteline synthetic elastomer bushings for enhanced performance
  • Comes with high-quality ball joints (where applicable) for improved reliability
  • Provides a complete replacement solution, eliminating the need for separate bushing and ball joint replacement
  • Designed to simplify installation and reduce the risk of damage to suspension arms
  • Ideal for BMW E46 and E9X models (Note: Does not fit XDrive models)
Show More Show Less
Febi Rear Control Arm Bushing - E36, E46, E83, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363778
Part#: 33321092247
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Upper control arm to subframe bushing

Enthusiast Bundles - Corporate Logo
T#:37419754
Part#: 051056LAEBKT
In Stock
Sale - Save 16% $ 670.14

This product was last offered at the strikethrough price on
05-05-2026

$ 560.32 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 670.14

This product was last offered at the strikethrough price on
05-05-2026

$ 560.32 USD
Free Shipping on orders $49 and up

ECS E90 xDrive Lowering Spring Set Transform your E90’s handling and stance with our specially designed ECS Lowering Springs. Built to enhance both cornering capability and ride comfort, these springs provide a balanced drop between 1.0"-1.3", giving your vehicle a sportier profile while keeping a smooth, OEM-like ride. Experience a lower center of gravity for improved stability, enhanced steering feedback, and a sleek look that reduces unsightly wheel gap for a true performance appearance.

Why Choose ECS Lowering Springs?

Better Handling and Stability: By lowering the center of gravity, these springs reduce body roll and improve road grip, delivering precise control through corners. Performance-Driven Design: Linear spring rates tuned for sporty responsiveness without sacrificing comfort, making them ideal for daily driving. Durability You Can Trust: Finished with a flat black powder coating for excellent corrosion resistance, so they look great and last. Specifications

Lowering Range: Front 1.0"-1.2", Rear 1.2"-1.3" Spring Rate: Front 505 lbs/in, Rear 854 lbs/in Ideal for Daily Drivers and Enthusiasts: With rates slightly above factory specs, ECS Lowering Springs provide improved handling without the harshness typical of coilovers, making them perfect for drivers seeking a more refined, performance-focused setup. Take it a step further by adding wheel spacers to achieve the ultimate stance—browse our wide selection of options for the E90 xDrive to complete your suspension overhaul!

ECS Performance Rear Trailing Arm Set Say goodbye to suspension flex and unwanted geometry changes under load with our Performance Rear Trailing Arms, an upgrade engineered to enhance strength and handling precision. Factory steel trailing arms can flex and even fail under harsh conditions, but these trailing arms are built to stand the test of time. Lightweight, rigid, and built from solid 6061-T6 aluminum, these trailing arms offer improved stability and peace of mind, no matter how demanding the road.

Why Upgrade to ECS Rear Trailing Arms?

Engineered for Strength: Constructed from high-grade 6061-T6 aluminum, anodized for corrosion resistance, these arms are designed to last longer and handle tougher conditions than OEM steel arms. Lightweight and Strong: Each arm is 25% lighter than stock, weighing 384 grams versus the factory 517 grams, reducing unsprung weight for better performance. Easy DIY Installation: Designed to fit seamlessly, these trailing arms won’t alter alignment settings, making them a straightforward upgrade for enthusiasts and home mechanics alike. Enhanced Handling: With virtually no flex, they eliminate unwanted suspension changes, providing a smoother, more controlled ride. Kit Includes

Lowering Spring Set: Front and rear springs with precise lowering specs and premium powder coating. Rear Trailing Arms: A set of solid 6061-T6 aluminum trailing arms, ready for direct replacement, along with all necessary hardware. Bolt Torque Spec: 74 ft-lbs

Show More Show Less

Whiteline - Corporate Logo
T#:31423719
Part#: W52614
Ships in 4 Business Days
$ 103.99

This product was last offered at the strikethrough price on
08-13-2026

$ 95.99 USD
Free Shipping on orders $49 and up
$ 95.99 USD
Free Shipping on orders $49 and up
Whiteline - Corporate Logo
T#:54388457
Part#: W52613
Ships in 4 Business Days
New Item
$ 116.99 USD
Free Shipping on orders $49 and up
Eliminating deflection at this specific suspension node is the single most effective way to eliminate wheel hop and preserve your baseline alignment under competitive racing loads. Professional alignment is highly recommended post-installation to re-verify front caster and toe settings
Show More Show Less

Lower Control Arm / Wishbone With Ball Joint - Right
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:582753
Part#: 31126772302
In Stock at Vendor
$ 123.99

This product was last offered at the strikethrough price on
03-20-2026

$ 87.34 USD
Free Shipping
$ 87.34 USD
Free Shipping
Febi Front Control Arm - Left - E60
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:396753
Part#: 31122347951
Ships in 3 Business Days
$ 120.99

This product was last offered at the strikethrough price on
05-07-2026

$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping
Quality aftermarket replacement. Found in the rear position

Febi Front Upper Control Arm Bushing - E34
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:13320
Part#: 31121139456
In Stock at Vendor
$ 14.99

This product was last offered at the strikethrough price on
05-22-2026

$ 8.99 USD
Free Shipping on orders $49 and up
$ 8.99 USD
Free Shipping on orders $49 and up
RUBBER MOUNTING ROD:H31120

Whiteline - Corporate Logo
T#:54388459
Part#: W52605
Ships in 4 Business Days
New Item
$ 66.99

This product was last offered at the strikethrough price on
08-13-2026

$ 61.99 USD
Free Shipping on orders $49 and up
$ 61.99 USD
Free Shipping on orders $49 and up
Deflection at the front lower control arm rear pivot drastically alters dynamic toe and caster alignment under high-load braking and cornering
Febi Rear Guide Link - E39, E60, E61, E63, E64, E65, E66
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:1195990
Part#: 33322348886
Ships in 3 Business Days
$ 104.99

This product was last offered at the strikethrough price on
05-07-2026

$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
Includes integrated ball joint and bushing
MMX Performance - Corporate Logo
T#:56363320
Part#: MMR55-1609
Ships in 4 Business Days
New Item
$ 495.00 USD
Free Shipping
$ 495.00 USD
Free Shipping
Engineered specifically for the BMW M2, M3, and M4, MMX Performance Adjustable Toe Arms replace flexing factory bushings with precision pillow ball rod ends. CNC machined from lightweight billet 6061-T6 aluminum, these arms lock in your alignment specs under cornering
Show More Show Less