Find Parts That Fit Your Vehicle

Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Performance Rear Upper Adjustable Control Arm Set - BMW E9X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22591963

Part#: AK-136

In Stock

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Don't let poor road or track conditions affect your vehicle's alignment, leading to excessive tire wear and compromised handling. Improve your suspension and achieve precise alignment with Godspeed Project's rear camber arms!

These camber arms enhance stability at high speeds, thanks to their precise alignment adjustments. The solid spherical bushings resist wear and outperform conventional rubber bushings. With heat-treated ball and hard chrome plated alloy steel construction, these camber arms offer exceptional strength and durability.

This cost-effective performance upgrade provides extended adjustment ranges, versatility, and improved road feel, thanks to their solid design. It's important to note that realignment is recommended after installation, and these camber arms are ideal for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less

Control Arm Bushings - Revshift-80A (OEM - Black)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582015

Part#: PCABE30BLACK

Ships in 1 Business Day

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

E9X Adjustable Trailing Arms With Spherical Bearings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31622602

Part#: AK-261-A

Ships in 7 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Control Arm Bushings - Revshift-95A (Street/Track - Green)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582014

Part#: PCABE30GREEN

Ships in 7 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Adjustable Rear Camber And Toe Kit W/ Sppherical Bearings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14386779

Part#: AK-210-A

In Stock

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Godspeed Project spherical bearing adjustable control arms are designed to replace factory bushing-type rods. The spherical bearing helps to improve both vehicle acceleration and deceleration by limiting the moving of the lower arms. These rods will also increase steering response and reduce roll at corners, adjustable turnbuckle allows for adjustment of caster angle for more precise wheel alignment. Heavy Duty Steel Alloy Rods And Turnbuckle Ends Allows Adjustability To Correct Suspension Geometry Improved Spherical Bearing Over Factory Rubber Bushings Anti-Corrosion Powder Coat Finish Helps Improve Both Acceleration And Deceleration NOTE: **This item is not designed for vehicles with EXCESSIVE camber or AIR SUSPENSIONS.**; No Installation Instructions; Install By Experienced Professionals Highly Recommended

Show More Show Less

Rear Adjustable Trailing Arm Kit for E9X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26005239

Part#: AK-137

Ships in 3 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Improve your BMW's suspension and alignment precision with Godspeed Project's Rear Trailing Arms. Designed to combat poor road or track conditions, these trailing arms offer stability and reduced tire wear, enhancing vehicle handling.

Key Benefits:

Precise alignment adjustment for stability at high speeds
Solid spherical bushings resist wear, ensuring durability
Heat-treated ball and hard chrome plated alloy steel construction for strength
Stainless steel race with PTFE fabric lining provides self-lubrication, minimizing wear
Affordable performance upgrade with increased adjustment ranges and versatility
Solid design offers improved road feel and handling feedback

Ensure optimal performance and alignment with Godspeed Project's Rear Trailing Arms, ideal for track use to enhance suspension reinforcement.

Show More Show Less

Offset Control Arm Bushings - E30 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582012

Part#: PCABE30M3GREEN

Ships in 7 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Offset Control Arm Bushings - Solid - E30 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:582013

Part#: PCABE30M3

Ships in 7 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Adjustable Rear Camber Arms W/ Spherical Bearings - E63/E64 6-Series ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959248

Part#: AK-099-E

Ships in 7 Business Days

$ 300.00

This product was last offered at the strikethrough price on
02-09-2026

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Lowering a vehicle will often take it out of OE alignment specification. A large majority of OE suspension components do not have any camber or toe angle adjustment. Out-of-spec alignment will result in poor handling and results in premature uneven tire wear. This kit will help your lowered car not only drive better, but your tires will have a longer lifespan as well. Godspeed's camber kits are designed to be reliable for daily driving yet strong enough for high performance and race use.

Show More Show Less

Select Vehicle

Category

Control Arm Replacements & Upgrades
- Front Control Arm (4)
- Rear Control Arm (5)

Brand

View All Brands

Price

Shipping