Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shock Shaft
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shoc...
Rogue Engineering - Corporate Logo
T#:656138
Part#: RSMNONONO
Back Ordered
$ 109.00 USD
Free Shipping
Add to Wish List
$ 109.00 USD
Free Shipping
Add to Wish List
Bilstein Front Strut Mount - E39 E46 E60 E61 F07 F10
Bilstein Front Strut Mount - E39 E46 E60 E61 F07 F10
Bilstein - Corporate Logo
T#:344302
Part#: 12-248940
In Stock
$ 58.00 USD
Free Shipping
Add to Wish List
$ 58.00 USD
Free Shipping
Add to Wish List
Complete front strut mount with bearing and retaining hardware
Bilstein Front Upper Strut Mount - 3-Bolt - BMW F22/23 F3X (up to 01/2015)
Bilstein Front Upper Strut Mount - 3-Bolt - BMW F22/23 F3X (up to 01/...
Bilstein - Corporate Logo
T#:28504208
Part#: 12-251377
Ships on Nov 11, 2026
$ 71.00 USD
Free Shipping
Add to Wish List
$ 71.00 USD
Free Shipping
Add to Wish List
To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer. One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. Priced each, but should always be replaced in pairs.
Show More Show Less
Active Autowerke Differential Support Bracket (DSB) - E36
Active Autowerke Differential Support Bracket (DSB) - E36
Active Autowerke - Corporate Logo
T#:397248
Part#: 13-004
Ships in 6 Business Days
5% off MSRP $ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping
Add to Wish List
5% off MSRP
$ 429.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.00 USD
Free Shipping
Add to Wish List

The main mounting bolt for the differential in the E36 is susceptible to shearing off during extreme driving conditions. This can cause internal damage to your diff, leaving you stranded at the track or on the side of the road. Active Autowerke's differential support bracket eliminates this issue forever in under an hour installation.

 

Previously used Active Autowerke Part Number AA-DSB-E36

This product fits the following BMWs:
1992-1999 E36 323i 325i 328i M3

Show More Show Less
Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - Outer
Fall-Line Motorsports G8X / F8X Rear Lower Control Arm Bearing Set - ...
Fall Line - Corporate Logo
T#:28038181
Part#: FLM-G8X-1BLCABO
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
Add to Wish List
$ 329.99 USD
Free Shipping
Add to Wish List
Experience championship-caliber performance with Fall-Line's Lower Control Arm Bearings, proudly Made in the USA. From years of competitive racing, Fall-Line is synonymous with producing top-tier suspension components that excel on the track. The weak link in the latest M Cars' rear camber arms is the rubber bushings, but Fall-Line's new lower control arm bearings offer a game-changing solution. This SKU replaces OEM BMW Part number: 33326792553 Key Features: Designed for all G8X and F8X M cars DMG Mori 5-Axis CNC machined for precision Full stainless bearing assembly including hats, bearings, housing, and spiral locks Sold in pairs; designed to replace the rear control/camber arm outer bearings (BMW Part Number: 33-32-6-792-553) By eliminating rubber from this critical feedback area, Fall-Line provides control over the tire's behavior and confidence behind the wheel at the limit. These bearings feature the largest FK spherical bearings on the market, ensuring strength and longevity even under competition-level loads. Stainless steel spiral locks offer 360 degrees of clamping force, securing the bearing from any potential movement. As a bonus, these spherical bearings outlast OEM rubber variants, eliminating the headache of repeated replacements over your ownership. Please note that, as with any elimination of suspension bushings, there may be a slight increase in noise, vibration, and harshness after installation. Upgrade your suspension with Fall-Line's Lower Control Arm Bearings and take your driving experience to the next level. Invest in championship-level performance with Fall-Line, the trusted name in motorsport.
Show More Show Less
Fall-Line Motorsports G8X M2 / M3 / M4 Front Monoball Conversion
Fall-Line Motorsports G8X M2 / M3 / M4 Front Monoball Conversion ...
Fall Line - Corporate Logo
T#:27938406
Part#: FLM-G8X-1BUNI
Ships in 1 Business Day
$ 395.00 USD
Free Shipping
Add to Wish List
$ 395.00 USD
Free Shipping
Add to Wish List
Upgrade your BMW's front suspension with our premium Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. This kit offers an advanced spherical bearing conversion, enhancing the performance of the bushing found within OEM BMW Part number: 31-10-8-095-668. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the car is put through its paces Made in the USA! Key Features: Spherical bearing conversion kit designed for precision and performance. Enhanced control and steering response without compromising ride comfort. Directly compatible with OEM BMW Part number: 31108095668. Perfectly complements G8X M3 and M4 models. Crafted with premium materials for long-lasting durability. Ideal for enthusiasts seeking improved handling during aggressive driving and track use. Take your BMW's performance to the next level with the Fall Line Motorsports G8X M3/M4 Front Monoball Conversion. Elevate your driving experience today with this high-quality upgrade. Get yours now and experience the difference!
Show More Show Less
Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M
Rear Lower Control Arm Bearing Set - Outer - E9X M3/E82 1M
Fall Line - Corporate Logo
T#:5580972
Part#: FLM-E9X-1BLCABO
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
Add to Wish List
$ 329.99 USD
Free Shipping
Add to Wish List
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less
Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M
Rear Lower Control Arm Cup Subframe Bearing Set - E9X M3/E82 1M ...
Fall Line - Corporate Logo
T#:5580971
Part#: F8X-1BLCASB
Back Ordered
$ 419.99 USD
Free Shipping
Add to Wish List
$ 419.99 USD
Free Shipping
Add to Wish List
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less
Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X
Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X ...
Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
Add to Wish List
$ 800.00 USD
Free Shipping
Add to Wish List
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm Bearing Set
Fall-Line Motorsports G8x / F8x M2 / M3 / M4 Rear Upper Control Arm B...
Fall Line - Corporate Logo
T#:27938412
Part#: FLM-G8X-1BRUCA
Back Ordered
$ 350.00 USD
Free Shipping
Add to Wish List
$ 350.00 USD
Free Shipping
Add to Wish List
MADE IN THE USA. Rubber bushings found in the G8X’s rear upper arms are the last weak link in an otherwise rigid suspension. The original BMW bushings yield to cornering forces applied to the suspension, resulting in camber and toe change that is not ideal for performance driving. Fall Line’s kit replaces the soft upper control arm bushings with spherical bearings, enabling the rear suspension arms to move smoothly through their travel and giving the rear of a car a more solid, planted feel. The reduced geometry change allows for the car to retain its desired alignment, maintaining better control over the tire’s behavior under heavy load. Designed to replace the inner bushings of the rear upper control arms; BMW Part Numbers: 33322284777, 33329504611, and 33329504612. The BMW M cars feature a subframe that is directly mounted to the chassis by BMW M, to reduce suspension compliance and improve performance and driving feel. Similarly, the Fall Line upper control arm bearings rigidly mount the suspension arms to the subframe, increasing driver feedback, reducing geometry change, and improving performance. As with any elimination of suspension bushings, more feedback does equate to more road and suspension noise. While the Fall Line rear upper control arm bearings are a substantial performance improvement, please do be prepared for increased noise, vibration, and harshness after installing the parts. Product Details: DMG Mori 5-Axis CNC machined Full stainless bearing assembly (hats, bearing, housing, spiral locks) Price is per set of 4 (2 per side); designed to replace the inner bushings of the rear upper control arms (BMW Part Numbers: 33-32-2-284-777, 33-32-9-504-611, & 33-32-9-504-612)
Show More Show Less
Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2
Fall-Line Motorsports Front Mono Ball Conversion Kit - F87 M2 ...
Fall Line - Corporate Logo
T#:598880
Part#: FLM-F87-1BUNI
Ships in 1 Business Day
$ 423.00 USD
Free Shipping
Add to Wish List
$ 423.00 USD
Free Shipping
Add to Wish List
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.
Show More Show Less
Trailing Arm Mono Ball Conversion Kit - E36/E46 M3
Trailing Arm Mono Ball Conversion Kit - E36/E46 M3
Fall Line - Corporate Logo
T#:5580954
Part#: FLM-E46-1BUNI
Ships in 3 Business Days
$ 408.00 USD
Free Shipping
Add to Wish List
$ 408.00 USD
Free Shipping
Add to Wish List
Fall Line’s mono ball spherical bearing conversion kit transforms the rear suspension feel of the E46 and E36 M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm.
Show More Show Less
Lower Tension Arm Bearing - Outer - E9X M3/E82 1M
Lower Tension Arm Bearing - Outer - E9X M3/E82 1M
Fall Line - Corporate Logo
T#:5580979
Part#: FLM-E9X-1BLTABO
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
Add to Wish List
$ 329.99 USD
Free Shipping
Add to Wish List
By eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less
BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing
BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing
Fall Line - Corporate Logo
T#:5580975
Part#: FLM-E9X-1BLTABI
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
Add to Wish List
$ 329.99 USD
Free Shipping
Add to Wish List

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing is engineered to elevate suspension performance with precision and durability. Developed by Fall-Line, known for their championship-level race cars and premium suspension components, this bearing is a significant upgrade over factory rubber bushings. Designed for motorsport applications, it incorporates FK spherical bearings for enhanced strength and longevity.

  • Superior Performance: Provides a notable improvement over OEM rubber bushings for enhanced control and feedback.
  • Durable Construction: Features the largest FK spherical bearings available, ensuring long-lasting reliability.
  • Enhanced Control: Eliminates rubber components to offer better control over tire behavior and increased driver confidence.
  • Robust Design: Equipped with stainless steel spiral locks for 360 degrees of clamping force to secure the bearing firmly.
  • Long-Lasting: Outperforms OEM rubber variants, reducing the need for frequent replacements.
  • Precision Engineering: CNC machined from high-quality materials in the USA for exact fit and superior performance.
Show More Show Less
Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E82, E9X
Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E8...
Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 8 Business Days
$ 413.38 USD
Free Shipping
Add to Wish List
$ 413.38 USD
Free Shipping
Add to Wish List
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X
Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X...
Genuine BMW Motorsport - Corporate Logo
T#:12075
Part#: E9X-GPN-TOE
Ships on Sep 17, 2026
$ 279.99 USD
Free Shipping
Add to Wish List
$ 279.99 USD
Free Shipping
Add to Wish List
These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E82, E9X
Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E8...
Genuine BMW Motorsport - Corporate Logo
T#:3093
Part#: E9X-GPN-FOLB
Ships on Sep 17, 2026
$ 519.80 USD
Free Shipping
Add to Wish List
$ 519.80 USD
Free Shipping
Add to Wish List
These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping