BMW Suspension Bushings & Mounts

Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not ...

T#:11953

Part#: E9X-REAR-MOUNTS

Ships in 4 Business Days

$ 96.73 USD

Add to Wish List

Qty

$ 96.73 USD

Add to Wish List

A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

1-series Strut/Shock Mount Kit - E82 128i, 135i

T#:11958

Part#: E82MOUNTKIT

Ships in 4 Business Days

Sale - Save 2% $ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.15 USD

Add to Wish List

Qty

Sale - Save 2%

$ 167.99

This product was last offered at the strikethrough price on
04-16-2026

$ 165.15 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

Included in the E82 1-series Mount Kit:

front upper strut mounts (also known as a guide support), 31306775098

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!!

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i - Coupe
2008-2012 E88 BMW 128i 135i - Convertible

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

E46Xi FRONT CONTROL ARM BRACKET KIT WITH E46 325Xi/330Xi FRONT CONTRO...

T#:401618

Part#: TSU4695PBX/16KT

In Stock

Sale - Save 19% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.99 USD

Add to Wish List

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Show More Show Less

E30 Complete Front & Rear Suspension Rebuild Kit

T#:21735879

Part#: E30SUPRBM1042KT

Ships in 6 Business Days

Sale - Save 8% $ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,011.00

This product was last offered at the strikethrough price on
07-07-2026

$ 927.88 USD

Add to Wish List

Experience a new level of comfort and control with our Level 3 Comprehensive Suspension Service for your beloved E30 BMW. Say goodbye to clunks, squeaks, and wandering issues plaguing your vehicle's front and rear ends. We provide an all-in-one solution to address these problems, offering superior performance and durability, ensuring your E30 drives better than ever before. Front-End Upgrades: Lemforder Front Lower Control Arms: Replace worn-out control arms with Lemforder precision-engineered components for enhanced stability and handling. Solid Rubber E36 M3 Front Control Arm Bushings: Improve steering feel and responsiveness with these solid rubber bushings, guaranteeing a more connected driving experience. Lemforder Front Sway Bar End Links: Upgrade your sway bar end links to Lemforder for enhanced durability and reduced play, further enhancing your E30's handling. Sachs Front Strut Mounts: Ensure smooth and controlled ride quality with Sachs front strut mounts, providing improved shock absorption and longevity. Lemforder Inner and Outer Tie Rod Assemblies: Replace your tie rod assemblies with Lemforder precision for precise steering and handling. All Required Retaining Hardware: We include all the necessary hardware to ensure a seamless installation, saving you time and hassle. Rear-End Enhancements: Rear Trailing Arm Bushings: Upgrade your rear trailing arm bushings for improved stability and handling characteristics. Rear Stabilizer Links: Replace worn stabilizer links for better control and reduced body roll during cornering. Upgraded Rear Shock Mounts from the E46 M3: Experience improved ride comfort and handling with upgraded rear shock mounts from the E46 M3. ECS Rear Shock Mount Reinforcement Plates: Ensure the longevity and reliability of your shock mounts with ECS reinforcement plates, protecting against deformation. Rear Shock Mount Hardware and Gasket: We provide all necessary hardware and gaskets to complete the installation seamlessly. Rear Subframe Mounts: Enhance rear-end stability and performance with upgraded rear subframe mounts. Differential Bushing: Improve power delivery and drivetrain response with a new differential bushing.

Show More Show Less

Genuine BMW Rear Upper Shock Mount, Bottom - 33506771738

T#:348679

Part#: 33506771738

In Stock

Sale - Save 18% $ 28.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.31 USD

Add to Wish List

Qty

Sale - Save 18%

$ 28.47

This product was last offered at the strikethrough price on
05-14-2026

$ 23.31 USD

Add to Wish List

Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.

Show More Show Less

3-series Front and Rear Strut/Shock Mount Kit - E9X Xi AWD

T#:340289

Part#: TMS11957

Ships in 3 Business Days

Starting at $ 167.45 USD

Add to Wish List

Starting at $ 167.45 USD

Add to Wish List

New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There are no special tools required and don't take any extra time!

Included in the Xi Mount Kit:

front upper strut mounts (also known as a guide support), 31336775097 or 31306785962

A. rear upper-top shock mounts, 33506771737

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33506771738

D. rear upper supporting cup, 33526764418 (sits over bumpstop)

rear lower shock mount (installs on spring arm), 33526768544
Buy as a package and save $!! Select the kit that fits the production date of your car below.

This item fits the following BMWs:
2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe

Show More Show Less

Front Control Arm Bracket Kit - E30, E36, Z3

T#:343068

Part#: TSU9995PB3KT

In Stock

Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD

Add to Wish List

Qty

Sale - Save 18%

$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD

Add to Wish List

Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.

Show More Show Less

Genuine BMW Front Control Arm Bushing - F25 X3 xDrive28i xDrive35i F2...

T#:22743

Part#: 31106786951

In Stock

Sale - Save 25% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.06 USD

Add to Wish List

Qty

Sale - Save 25%

$ 51.99

This product was last offered at the strikethrough price on
05-02-2026

$ 39.06 USD

Add to Wish List

Genuine BMW Rubber Mounting F Pull Rod -
This item fits the following BMW Chassis:
F25 X3,F26 X4

Rear Subframe Bushings/Mounts - Fore/Front Pair - E36 M3 (Upgrade for...

T#:338094

Part#: 33319066671

Ships in 1 day

Starting at $ 125.99 USD

Add to Wish List

Starting at $ 125.99 USD

Add to Wish List

On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

There are four bushings/mounts connecting the subframe to the chassis. These are the fore (front) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the aft (rear) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the rear-most pair as well on the drop-down box below).

Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

These mounts are sold as a pair, so two are included for this price.

Show More Show Less

Shock and Strut Installation Kit - E9X 325xi 328xi 330xi 335xi ...

T#:554760

Part#: E9XXISIKT

Ships in 4 Business Days

$ 382.06 USD

Add to Wish List

Qty

$ 382.06 USD

Add to Wish List

Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

This item fits the following BMWs:
2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

Show More Show Less

Rear Upper Shock Mount Kit

T#:15710806

Part#: 33506771738-KT

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Includes all the necessary mounts to install new shocks on the rear of your E9X BMW. The following parts are included. Rear Upper Shock Mount - Upper Section (x2) Rear Upper Shock Mount - Lower Section (x2) Supporting Cup (x2) Sealing grommet (x2)

Show More Show Less

Whiteline Rear sway bar bushing - 20mm - E34, E36, E46

T#:54388458

Part#: W22801

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Engineered to optimize rear roll stiffness and eliminate the dynamic compliance of aging factory components

3-series Strut/Shock Mount Kit - Rubber Bushings - E30 318i/325e/325i...

T#:338659

Part#: E30MOUNTKIT

Back Ordered

Sale - Save 3% $ 286.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 278.38 USD

Add to Wish List

Sale - Save 3%

$ 286.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 278.38 USD

Add to Wish List

This package of mounts includes the front and rear mounts that should also be installed when replacing your struts and shocks. Don't overlook your rubber suspension mounts as they wear out just as fast (or faster) as the shocks themselves. Installing these new mounts does not take any additional time, effort, or special tools. These are direct replacements for the mounts already on the car.

E30 Mount Kit includes -

Front upper strut mounts (guide support), standard alignment settings (not offset)

Front and rear self-locking mounting nuts

Rear Lifetime Warranty 'Repair Shop' shock mounts

Rear shock mount gaskets
We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3

Show More Show Less

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

T#:24344778

Part#: ECSTMSPDBKT

In Stock

Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane

Show More Show Less

5-series Strut/Shock Mount Kit - E39 540i/M5 with Performance Shocks/...

T#:182513

Part#: TMS182513

Back Ordered

Sale - Save 6% $ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 716.44 USD

Add to Wish List

Qty

Sale - Save 6%

$ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 716.44 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540 M5i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:16175687

Part#: 31331091708-KT

Ships in 5 Business Days

Sale - Save 2% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

Qty

Sale - Save 2%

$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Performance Differential Cover install kit

T#:556968

Part#: 33112282482KT3

Ships in 10 Business Days

Sale - Save 7% $ 676.14

This product was last offered at the strikethrough price on
05-03-2026

$ 627.61 USD

Add to Wish List

Qty

Sale - Save 7%

$ 676.14

This product was last offered at the strikethrough price on
05-03-2026

$ 627.61 USD

Add to Wish List

This kit includes Turner Motorsport solid aluminum differential race mounts pre installed in the differential cover for a quick install. These mounts where developed by Turner Motorsport for their Grand-Am Cup E46 M3 race cars, the advantages of solid aluminum mounts is increased suspension & drivetrain response, less drivetrain loss resulting in more wheel horsepower, and longevity - they effectively last forever. These CNC-machined mounts are a direct replacement for the stock rubber pieces, and have been lightened to remove excess weight.

Show More Show Less

3-series Strut/Shock Mount Kit - E36, Z3 (not M models)

T#:340167

Part#: E36MOUNTKIT

Back Ordered

Sale - Save 3% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 312.43 USD

Add to Wish List

Sale - Save 3%

$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 312.43 USD

Add to Wish List

The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , two front strut tower paper washer gaskets, two rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

Choose your product options below.

This item fits the following BMWs:
6/1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is - not for convertibles
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Genuine BMW Stopper, Top Rear - 33316765409 - E63

T#:60082

Part#: 33316765409

In Stock

Sale - Save 26% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.59 USD

Add to Wish List

Qty

Sale - Save 26%

$ 51.99

This product was last offered at the strikethrough price on
05-02-2026

$ 38.59 USD

Add to Wish List

Genuine BMW Stopper, Top Rear -
This item fits the following BMW Chassis:
E63

Genuine BMW Front Wishbone Bracket - Left - E46 325xi, E46 330xi ...

T#:12570

Part#: 31121139791

In Stock

Sale - Save 70% $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 71.57 USD

Add to Wish List

Qty

Sale - Save 70%

$ 239.99

This product was last offered at the strikethrough price on
05-02-2026

$ 71.57 USD

Add to Wish List

Genuine BMW Left Wishbone Bracket -
This item fits the following BMW Chassis:
E46

Genuine BMW Front Control Arm Bushing - E70, E71

T#:54002

Part#: 31106771194

In Stock

Sale - Save 33% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.93 USD

Add to Wish List

Qty

Sale - Save 33%

$ 51.99

This product was last offered at the strikethrough price on
05-02-2026

$ 34.93 USD

Add to Wish List

Genuine BMW Rubber Bushing For A-Arm
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6

Cup Kit/Coilover Installation Kit

T#:15644325

Part#: 33306760349-KT

Ships in 4 Business Days

$ 364.60 USD

Add to Wish List

Qty

$ 364.60 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. See kit contents tab for a list of included components.

Show More Show Less

Genuine BMW Guide Support, Upper Part - 33526776399 - E70 X5,E71 X6 ...

T#:60836

Part#: 33526776399

Ships in 3 Business Days

Sale - Save 5% $ 20.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 19.16 USD

Add to Wish List

Qty

Sale - Save 5%

$ 20.17

This product was last offered at the strikethrough price on
05-14-2026

$ 19.16 USD

Add to Wish List

Genuine BMW Guide Support, Upper Part -
This item fits the following BMW Chassis:
E70 X5,E71

Complete Performance Polyurethane Differential And Subframe Bushing S...

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

Rear Shock Mount Refresh Kit

T#:55281742

Part#: 3352BBKT

In Stock

$ 28.58 USD

Add to Wish List

Qty

$ 28.58 USD

Add to Wish List

This Rear Shock Mount and Gasket Refresh Kit provides exactly what you need to maintain chassis integrity and prevent distracting cabin noise.

Whiteline Lower Inner Rear Front Control Arm Bushings - E46, Z4 ...

T#:54388457

Part#: W52613

Ships in 4 Business Days

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Eliminating deflection at this specific suspension node is the single most effective way to eliminate wheel hop and preserve your baseline alignment under competitive racing loads. Professional alignment is highly recommended post-installation to re-verify front caster and toe settings

Show More Show Less

Whiteline Lower Inner Rear Front Control Arm Bushing - E9x, E46, Z4 ...

T#:54388459

Part#: W52605

Ships in 4 Business Days

$ 66.99

This product was last offered at the strikethrough price on
08-13-2026

$ 61.99 USD

Add to Wish List

Qty

$ 61.99 USD

Add to Wish List

Deflection at the front lower control arm rear pivot drastically alters dynamic toe and caster alignment under high-load braking and cornering

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

T#:15677578

Part#: 07119907135-KT

In Stock

$ 581.75 USD

Add to Wish List

Qty

$ 581.75 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Front Suspension Refresh Kit - Level 2

T#:15677491

Part#: 31106797237-KT

Ships in 5 Business Days

Sale - Save 8% $ 956.99

This product was last offered at the strikethrough price on
02-27-2026

$ 880.52 USD

Add to Wish List

Qty

Sale - Save 8%

$ 956.99

This product was last offered at the strikethrough price on
02-27-2026

$ 880.52 USD

Add to Wish List

Level 2 suspension refresh kit is designed to offer a complete overhaul of your BMW's front suspension. This kit address all suspension symptoms such as loose or not precise steering, clunking and wandering. Every component, from the control arms (with pressed in bushings) down to the tie rods and sway bar bushings are included for a new car feel. This refresh can be performed by a competent enthusiast in a day, assuming the correct tools are available. See kit contents tab for a list of included components

Show More Show Less

Front And Rear Suspension Refresh Kit HD - Level 3

T#:15710810

Part#: 31126768989-KT

Ships on Dec 24, 2026

Sale - Save 4% $ 2,148.28

This product was last offered at the strikethrough price on
08-12-2026

$ 2,055.26 USD

Add to Wish List

Qty

Sale - Save 4%

$ 2,148.28

This product was last offered at the strikethrough price on
08-12-2026

$ 2,055.26 USD

Add to Wish List

Refresh your whole suspension system back to new with this level 3 refresh kit! Including all the components and hardware you need, this kit will transform your vehicle's ride back to showroom quality. All the parts you need at the click of a button!

Show More Show Less

3-series Strut/Shock Mount Kit - MZ3

T#:340357

Part#: MZ3MOUNTKIT

Back Ordered

Sale - Save 3% $ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD

Add to Wish List

Sale - Save 3%

$ 474.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 460.74 USD

Add to Wish List

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:

Front strut mounts (also known as guide support)

Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)

Front and rear self-locking mounting nuts

Rear Lifetime Warranty 'Repair Shop' shock mounts

Rear shock mount reinforcements (to prevent cracking of shock towers)

Rear shock mount gaskets
In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1998-2002 Z3 BMW M Roadster M Coupe

Show More Show Less

5-series Strut/Shock Mount Kit - E39 540i with Factory Sport Suspensi...

T#:182514

Part#: TMS182514

Back Ordered

Sale - Save 5% $ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 833.21 USD

Add to Wish List

Qty

Sale - Save 5%

$ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 833.21 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

front bump stop

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
with factory sport suspension

Show More Show Less

3-series Strut/Shock Mount Kit - E46 (not M3, not xi)

T#:338747

Part#: E46MOUNTKIT

Back Ordered

Sale - Save 5% $ 377.99

This product was last offered at the strikethrough price on
06-25-2026

Starting at $ 357.85 USD

Add to Wish List

Sale - Save 5%

$ 377.99

This product was last offered at the strikethrough price on
06-25-2026

Starting at $ 357.85 USD

Add to Wish List

This mount package contains all of the commonly replaced rubber mounts and pads for the front and rear shocks on a 1999-2005 E46 3-series (not for M3 or xi AWD). While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

Pick and choose from mounts below:

Front strut mounts (also known as the guide support)

Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)

Front and rear self-locking mounting nuts

Rear Lifetime Warranty 'Repair Shop' shock mounts

Rear shock mount reinforcements (to prevent cracking of shock towers)

Rear shock mount gaskets The spring pads, dust boots, and bump stops can be added from the menu below. Note that front bump stops and dust boots are generally not required if you're using Bilstein struts, Bilstein coil overs, H&R coil overs, or KW coil overs. Those struts come with their own front bump stops and boots and may include rear stops and boots as well.

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Show More Show Less

3-series Strut/Shock Mount Kit - E36 Convertibles

T#:340163

Part#: E36ICMOUNTKIT

Back Ordered

Sale - Save 3% $ 357.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 348.31 USD

Add to Wish List

Sale - Save 3%

$ 357.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 348.31 USD

Add to Wish List

The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates , front strut tower paper gaskets, two rear shock tower reinforcement plates , ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.

You can choose from the HD OEM Rear Mounts , the " Repair Shop" Lifetime Warranty Mounts , or the High Performance Aluminum & Rubber Mounts . Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.

When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strutinstall.

Choose your product options below.

This item fits the following BMWs:
1994-1998 E36 BMW 318ic 323ic 325ic 328ic M3 Convertible

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Bushings & Mounts

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results