Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shock Shaft
Rogue Engineering Rear Shock Mount (E30/E36/E46) - Standard 10mm Shoc...
Rogue Engineering - Corporate Logo
T#:656138
Part#: RSMNONONO
Back Ordered
$ 109.00 USD
Free Shipping
Add to Wish List
$ 109.00 USD
Free Shipping
Add to Wish List
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair)
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...
Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
IRP Performance Rear Polyurethane Shock Mount Kit - E30 E36 E46 Z3 Z4
IRP Performance Rear Polyurethane Shock Mount Kit - E30 E36 E46 Z3 Z4...
IRP - Individual Racing Parts - Corporate Logo
T#:401369
Part#: IRPRTM-P
In Stock
$ 110.00 USD
Free Shipping
Add to Wish List
$ 110.00 USD
Free Shipping
Add to Wish List

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less
SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X
SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...
SPL Parts - Corporate Logo
T#:17804825
Part#: SPLRLCBE9X
In Stock
$ 152.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 152.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87
Show More Show Less
IRP Rear Lower Shock Mount Set - E8X E9X Non-M
IRP Rear Lower Shock Mount Set - E8X E9X Non-M
IRP - Individual Racing Parts - Corporate Logo
T#:587022
Part#: IRPRSM-90B
In Stock
$ 195.00 USD
Free Shipping
Add to Wish List
$ 195.00 USD
Free Shipping
Add to Wish List
The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
Show More Show Less
Polyurethane Rear Trailing Arm Bushings - E36/E46
Polyurethane Rear Trailing Arm Bushings - E36/E46
Revshift - Corporate Logo
T#:582005
Part#: PTABE6GREEN
Ships in 1 Business Day
$ 79.99 USD
Free Shipping
Add to Wish List
$ 79.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a standard 10mm pin diameter
Revshift - Corporate Logo
T#:1105924
Part#: RSM-E6-10MM
Ships in 1 Business Day
$ 99.99 USD
Free Shipping
Add to Wish List
$ 99.99 USD
Free Shipping
Add to Wish List
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
Show More Show Less
Polyurethane Rear Subframe Bushings - E36
Polyurethane Rear Subframe Bushings - E36
Revshift - Corporate Logo
T#:582007
Part#: PSBE36GREEN
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
Add to Wish List
$ 159.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Rear Subframe Bushings/Mount Set - Rubber - E46 M3, Z4 M
Rear Subframe Bushings/Mount Set - Rubber - E46 M3, Z4 M
Genuine BMW - Corporate Logo
T#:2051
Part#: TMS2051
In Stock
$ 291.99 USD
Free Shipping
Add to Wish List
$ 291.99 USD
Free Shipping
Add to Wish List
Any subframe work or reinforcement project on the rear of the E46 M3 should include a new set of subframe mounts. It's the worn rubber bushings that contribute to failed rear subframes on the E46 (but not the only reason). As the rubber gets worn, there is more flex to the mount. This flexing is then transferred to the sheetmetal in the floor where the spot welds will pop and the sheetmetal will crack. Additional force coming from stiffer suspensions and stickier tires will only increase the flexing of the mounts/chassis.

Of course, stiffer mounts would help prevent this problem but with a stiffer bushing comes ride harshness, vibration, and additional noise. Our engineers and technicians recommend replacement with the factory rubber bushings (along with the appropriate reinforcement of the floor). The rubber bushings help isolate bumps and impacts and are quiet. They are also a perfect fitment and require no maintenance.

This item is a set of 4 Original BMW rubber subframe mounts. Individual part numbers - 33 31 2 283 573 (left front), 33 31 2 283 574 (right front), and 33 31 2 283 419 (left and right rear, x 2).

Applications:
2001-2006 E46 M3, M3 CSL coupe, convertible
2007-up Z4 M Roadster, M Coupe

Show More Show Less
Polyurethane Rear Trailing Arm Bushings - Revshift-95A (Street/Track - Green)
Polyurethane Rear Trailing Arm Bushings - Revshift-95A (Street/Track ...
Revshift - Corporate Logo
T#:582006
Part#: PTABE30GREEN
In Stock
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Rear Polyurethane Bushing Kit - E30
Rear Polyurethane Bushing Kit - E30
Revshift - Corporate Logo
T#:1105909
Part#: RBK-E3095A
Ships in 5 Business Days
$ 199.99 USD
Free Shipping
Add to Wish List
$ 199.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Control Arm Bushings - Revshift-80A (OEM - Black)
Control Arm Bushings - Revshift-80A (OEM - Black)
Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Polyurethane Rear Subframe Bushings - E36
Polyurethane Rear Subframe Bushings - E36
Revshift - Corporate Logo
T#:582008
Part#: PSBE36BLACK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping
Add to Wish List
$ 159.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Rear Traction Arm Knuckle Bushing - F2X/F3X
Rear Traction Arm Knuckle Bushing - F2X/F3X
SPL Parts - Corporate Logo
T#:13957906
Part#: SPL-RKB-F3X
Ships in 2 Business Days
$ 169.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 169.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These Rear Traction Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. The folks at SPL use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a larger 12mm pin diameter
Revshift - Corporate Logo
T#:1105925
Part#: RSM-E6-12MM
Ships in 2 Business Days
$ 99.99 USD
Free Shipping
Add to Wish List
$ 99.99 USD
Free Shipping
Add to Wish List
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
Show More Show Less
Full Polyurethane Bushing Kit - E36
Full Polyurethane Bushing Kit - E36
Revshift - Corporate Logo
T#:1105899
Part#: FBK-E36C95A
Ships in 5 Business Days
$ 379.99 USD
Free Shipping
Add to Wish List
$ 379.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Polyurethane Rear Subframe Bushings - E30
Polyurethane Rear Subframe Bushings - E30
Revshift - Corporate Logo
T#:1105916
Part#: PSB-E3095A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
Add to Wish List
$ 89.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 series xdrive only
SPL Parts Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 seri...
SPL Parts - Corporate Logo
T#:587636
Part#: SPL-CRB-F3IX
In Stock
$ 413.00 USD
Free Shipping
Add to Wish List
$ 413.00 USD
Free Shipping
Add to Wish List
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X
Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X ...
Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
Add to Wish List
$ 800.00 USD
Free Shipping
Add to Wish List
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Full Polyurethane Bushing Kit - E36 - 95A - Green - Offset Bushings
Full Polyurethane Bushing Kit - E36 - 95A - Green - Offset Bushings ...
Revshift - Corporate Logo
T#:1980634
Part#: FBKOFFSET
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
Add to Wish List
$ 379.99 USD
Free Shipping
Add to Wish List
Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components
SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F8X
SPL Parts Caster Adjustable Tension/Trailing Rod Bushings - E8X E9X F...
SPL Parts - Corporate Logo
T#:553806
Part#: SPLCRBE9X
Ships in 2 Business Days
$ 413.00 USD
Free Shipping
Add to Wish List
$ 413.00 USD
Free Shipping
Add to Wish List
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less
SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 series xdrive only
SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...
SPL Parts - Corporate Logo
T#:587638
Part#: SPL-CRBN-F3IX
Ships in 2 Business Days
$ 359.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 359.00 USD
Free Shipping on orders $49 and up
Add to Wish List
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Polyurethane Rear Subframe Bushings - E46
Polyurethane Rear Subframe Bushings - E46
Revshift - Corporate Logo
T#:1105904
Part#: PSB-E46M
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
Add to Wish List
$ 189.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts Adjustable Front Caster Rod Monoball Bushings
SPL Parts Adjustable Front Caster Rod Monoball Bushings
SPL Parts - Corporate Logo
T#:587637
Part#: SPL-CRB-F3X
Ships in 2 Business Days
$ 413.00 USD
Free Shipping
Add to Wish List
$ 413.00 USD
Free Shipping
Add to Wish List
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Control Arm Bushings - Revshift-95A (Street/Track - Green)
Control Arm Bushings - Revshift-95A (Street/Track - Green)
Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Polyurethane Rear Subframe Bushings - E34
Polyurethane Rear Subframe Bushings - E34
Revshift - Corporate Logo
T#:1105932
Part#: PSB-E3480A
Ships in 1 Business Day
$ 119.99 USD
Free Shipping
Add to Wish List
$ 119.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 series RWD only
SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...
SPL Parts - Corporate Logo
T#:587639
Part#: SPL-CRBN-F3X
Ships in 2 Business Days
$ 359.00 USD
Free Shipping
Add to Wish List
$ 359.00 USD
Free Shipping
Add to Wish List
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction.
Show More Show Less
Polyurethane Rear Subframe Bushings - E36 318ti
Polyurethane Rear Subframe Bushings - E36 318ti
Revshift - Corporate Logo
T#:1105922
Part#: PSB-318TI95A
In Stock
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Rear Polyurethane Bushing Kit - E30 12MM Offset
Rear Polyurethane Bushing Kit - E30 12MM Offset
Revshift - Corporate Logo
T#:1105914
Part#: RBK-E3095A12MM
Ships in 7 Business Days
$ 224.99 USD
Free Shipping
Add to Wish List
$ 224.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Billet Aluminum Subframe Bushing Kit - BMW E9X E82
Revshift Billet Aluminum Subframe Bushing Kit - BMW E9X E82
Revshift - Corporate Logo
T#:1105926
Part#: ASB-E9X
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
Add to Wish List
$ 299.99 USD
Free Shipping
Add to Wish List
Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
Show More Show Less
Polyurethane Rear Subframe Bushings - E30 12MM Offset
Polyurethane Rear Subframe Bushings - E30 12MM Offset
Revshift - Corporate Logo
T#:1105917
Part#: PSB-E3012MM95A
Ships in 7 Business Days
$ 119.99 USD
Free Shipping
Add to Wish List
$ 119.99 USD
Free Shipping
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Polyurethane Rear Subframe Bushings - E30 325iX
Polyurethane Rear Subframe Bushings - E30 325iX
Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 89.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Polyurethane Subframe Bushings - 95A (Track - Green) - BMW E9X / E8X
Revshift Polyurethane Subframe Bushings - 95A (Track - Green) - BMW E...
Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less
Offset Control Arm Bushings - Solid - E30 M3
Offset Control Arm Bushings - Solid - E30 M3
Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Offset Control Arm Bushings - E30 M3
Offset Control Arm Bushings - E30 M3
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E82, E9X
Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E8...
Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 8 Business Days
$ 413.38 USD
Free Shipping
Add to Wish List
$ 413.38 USD
Free Shipping
Add to Wish List
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M)
IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...
IRP - Individual Racing Parts - Corporate Logo
T#:2408491
Part#: IRPRSB-90PU
Special Order: No Guaranteed ETA
$ 169.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 169.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
Show More Show Less
IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87 M2, F80 M3, F82 M4
IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...
IRP - Individual Racing Parts - Corporate Logo
T#:2408498
Part#: IRPRSB-9XMB2
Special Order: No Guaranteed ETA
$ 176.99 USD
Free Shipping
Add to Wish List
$ 176.99 USD
Free Shipping
Add to Wish List
Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
Show More Show Less
IRP Performance Rear Pillow-Ball Shock Mount - E30 E36 E46 Z3 Z4
IRP Performance Rear Pillow-Ball Shock Mount - E30 E36 E46 Z3 Z4 ...
IRP - Individual Racing Parts - Corporate Logo
T#:401368
Part#: IRPRTM-B
Special Order: No Guaranteed ETA
$ 185.99 USD
Free Shipping
Add to Wish List
$ 185.99 USD
Free Shipping
Add to Wish List

Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less
AutoTecknic Carbon Alcantara Steering Wheel Trim
AutoTecknic Carbon Alcantara Steering Wheel Trim
AUTOTECKNIC - Corporate Logo
T#:42571263
Part#: BM-0619PDK
Ships in 7 Business Days
Starting at $ 295.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 295.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Revshift Polyurethane Subframe Bushings - 75D (Drift - Teal) - BMW E9X / E8X
Revshift Polyurethane Subframe Bushings - 75D (Drift - Teal) - BMW E9...
Revshift - Corporate Logo
T#:47199274
Part#: PSB-E9X-75D
Ships in 7 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less
Revshift Rear Bushing Kit - BMW E30 - 80A Street (Black Bushing) - Stock Height Subframe
Revshift Rear Bushing Kit - BMW E30 - 80A Street (Black Bushing) - St...
Revshift - Corporate Logo
T#:34415631
Part#: RBK-E3080A-STOCK
Ships in 7 Business Days
$ 199.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Revshift Polyurethane Subframe Bushings - 80A (Street - Black) - BMW E9X / E8X
Revshift Polyurethane Subframe Bushings - 80A (Street - Black) - BMW ...
Revshift - Corporate Logo
T#:47199272
Part#: PSB-E9X-80A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 249.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less
Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E82, E9X
Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E8...
Genuine BMW Motorsport - Corporate Logo
T#:3093
Part#: E9X-GPN-FOLB
Ships on Sep 16, 2026
$ 519.80 USD
Free Shipping
Add to Wish List
$ 519.80 USD
Free Shipping
Add to Wish List
These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X
Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X...
Genuine BMW Motorsport - Corporate Logo
T#:12075
Part#: E9X-GPN-TOE
Ships on Sep 16, 2026
$ 279.99 USD
Free Shipping
Add to Wish List
$ 279.99 USD
Free Shipping
Add to Wish List
These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less
IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)
IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)
IRP - Individual Racing Parts - Corporate Logo
T#:2408474
Part#: IRPRSB-90AL
Special Order: No Guaranteed ETA
$ 319.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 319.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less
IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M
IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M
IRP - Individual Racing Parts - Corporate Logo
T#:2408494
Part#: IRPRSB-90MAL
Special Order: No Guaranteed ETA
$ 294.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 294.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping