BMW Suspension Bushings & Mounts

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

T#:17804825

Part#: SPLRLCBE9X

In Stock

$ 152.00 USD

Add to Wish List

Qty

$ 152.00 USD

Add to Wish List

These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

T#:40917450

Part#: RTAMB-E36-E46

In Stock at Vendor

$ 265.00 USD

Add to Wish List

Qty

$ 265.00 USD

Add to Wish List

Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.

Show More Show Less

Rear Traction Arm Knuckle Bushing - F2X/F3X

T#:13957906

Part#: SPL-RKB-F3X

Ships in 1 Business Day

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

These Rear Traction Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. The folks at SPL use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment.

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:15644279

Part#: 31306763966-KT

Ships in 3 Business Days

$ 518.74 USD

Add to Wish List

Qty

$ 518.74 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

T#:587122

Part#: DIFE30

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Condor Speed Shop's E30 solid differential bushing is designed for the street and the track. They use UHMW in all of their suspension bushings because it is stiff, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. With their solid diff bushing, you won't have to worry about any more rubbery flex in your diff during hard acceleration.

Show More Show Less

Karlyn Front Ball Joint - Right - E46

T#:362519

Part#: 31126756696

In Stock at Vendor

$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Includes securing nut

SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...

T#:587638

Part#: SPL-CRBN-F3IX

Ships in 1 Business Day

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.

Show More Show Less

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Karlyn Front Ball Joint - Left - E46

T#:362518

Part#: 31126756695

Ships in 2 Business Days

$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Includes securing nut

E46 non-M OEM/HD Rear Subframe Mount Set

T#:340768

Part#: 33316770781KT

Ships in 2 Business Days

$ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. This kit comprises OEM Lemforder and Meyle HD rubber subframe mounts. Solid aluminum mounts are also available with very little increase in NVH.

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 1, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

T#:24344778

Part#: ECSTMSPDBKT

In Stock

Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane

Show More Show Less

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

T#:2408491

Part#: IRPRSB-90PU

Special Order: No Guaranteed ETA

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.

Show More Show Less

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

T#:338064

Part#: 31129069035

Ships in 2 Business Days

Starting at $ 46.99 USD

Add to Wish List

Starting at $ 46.99 USD

Add to Wish List

Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:16175687

Part#: 31331091708-KT

Ships in 4 Business Days

Sale - Save 2% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

Qty

Sale - Save 2%

$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:15644325

Part#: 33306760349-KT

Ships in 3 Business Days

$ 364.60 USD

Add to Wish List

Qty

$ 364.60 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. See kit contents tab for a list of included components.

Show More Show Less

Complete Performance Polyurethane Differential And Subframe Bushing S...

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

Rear Shock Mount Refresh Kit

T#:55281742

Part#: 3352BBKT

In Stock

$ 28.58 USD

Add to Wish List

Qty

$ 28.58 USD

Add to Wish List

This Rear Shock Mount and Gasket Refresh Kit provides exactly what you need to maintain chassis integrity and prevent distracting cabin noise.

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

T#:15677578

Part#: 07119907135-KT

In Stock

$ 581.75 USD

Add to Wish List

Qty

$ 581.75 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Coilover Installation/Cup Kit - Front - 5-Bolt Strut Mount

T#:27871824

Part#: 31306881930KT4

Ships in 2 Business Days

$ 495.99

This product was last offered at the strikethrough price on
03-11-2026

$ 377.99 USD

Add to Wish List

Qty

$ 377.99 USD

Add to Wish List

Installing a new set of shocks and struts in your BMW? Turner has your back with this complete "cup kit", which contains all the necessary components for ensuring a lasting installation.

See "kit contents" for a detailed list of all components included with this purchase.

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)

T#:2408474

Part#: IRPRSB-90AL

Special Order: No Guaranteed ETA

$ 319.99 USD

Add to Wish List

Qty

$ 319.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less

IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M

T#:2408494

Part#: IRPRSB-90MAL

Special Order: No Guaranteed ETA

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.

Show More Show Less

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

T#:41289766

Part#: 31521428678TKT

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

Project Cars

SELECT YOUR BMW

BMW Suspension Bushings & Mounts

Sub-Categories

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

Condor Speed Shop Rear Trailing Arm Monoball Bushings - BMW E36 E46 ...

Rear Traction Arm Knuckle Bushing - F2X/F3X

Cup Kit/Coilover Installation Kit

Condor Speed Shop Solid Differential Bushing - E30, E28, Z3 & 318ti ...

Karlyn Front Ball Joint - Right - E46

SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

Karlyn Front Ball Joint - Left - E46

E46 non-M OEM/HD Rear Subframe Mount Set

Poly Transmission Mount Set

Replacement Bushings for Rear Shock Tower Mounts

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

Cup Kit/Coilover Installation Kit

Cup Kit/Coilover Installation Kit

Complete Performance Polyurethane Differential And Subframe Bushing S...

Rear Shock Mount Refresh Kit

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

Coilover Installation/Cup Kit - Front - 5-Bolt Strut Mount

IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)

IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results