BMW Suspension Bushings & Mounts

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

T#:11986

Part#: E9X-URSM

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible

Show More Show Less

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

T#:17804825

Part#: SPLRLCBE9X

In Stock

$ 152.00 USD

Add to Wish List

Qty

$ 152.00 USD

Add to Wish List

These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

Show More Show Less

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

T#:11954

Part#: TMS11954

In Stock

Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

Qty

Sale - Save 2%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

T#:339943

Part#: E46-MY-DIFF

In Stock

$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster

Show More Show Less

Rear Traction Arm Knuckle Bushing - F2X/F3X

T#:13957906

Part#: SPL-RKB-F3X

Ships in 2 Business Days

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

These Rear Traction Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. The folks at SPL use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment.

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:15644279

Part#: 31306763966-KT

Ships in 4 Business Days

$ 518.74 USD

Add to Wish List

Qty

$ 518.74 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job.

SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...

T#:587638

Part#: SPL-CRBN-F3IX

Ships in 2 Business Days

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.

Show More Show Less

E46 non-M OEM/HD Rear Subframe Mount Set

T#:340768

Part#: 33316770781KT

Ships in 3 Business Days

$ 156.99

This product was last offered at the strikethrough price on
04-16-2026

$ 104.99 USD

Add to Wish List

Qty

$ 104.99 USD

Add to Wish List

The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. This kit comprises OEM Lemforder and Meyle HD rubber subframe mounts. Solid aluminum mounts are also available with very little increase in NVH.

Show More Show Less

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 1, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

T#:24344778

Part#: ECSTMSPDBKT

In Stock

Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD

Add to Wish List

Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

T#:338064

Part#: 31129069035

Ships in 1 Business Day

Starting at $ 46.99 USD

Add to Wish List

Starting at $ 46.99 USD

Add to Wish List

Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:16175687

Part#: 31331091708-KT

Ships in 5 Business Days

Sale - Save 2% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

Qty

Sale - Save 2%

$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 574.36 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

Cup Kit/Coilover Installation Kit

T#:15644325

Part#: 33306760349-KT

Ships in 4 Business Days

$ 364.60 USD

Add to Wish List

Qty

$ 364.60 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job. See kit contents tab for a list of included components.

Show More Show Less

Complete Performance Polyurethane Differential And Subframe Bushing S...

T#:56038061

Part#: E9XSBFRDFFBKT2

In Stock

$ 491.99 USD

Add to Wish List

Qty

$ 491.99 USD

Add to Wish List

This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.

Show More Show Less

Rear Shock Mount Refresh Kit

T#:55281742

Part#: 3352BBKT

In Stock

$ 28.58 USD

Add to Wish List

Qty

$ 28.58 USD

Add to Wish List

This Rear Shock Mount and Gasket Refresh Kit provides exactly what you need to maintain chassis integrity and prevent distracting cabin noise.

Coilover Installation/Cup Kit - Front - 5-Bolt Strut Mount

T#:27871824

Part#: 31306881930KT4

Ships in 3 Business Days

$ 495.99

This product was last offered at the strikethrough price on
03-11-2026

$ 377.99 USD

Add to Wish List

Qty

$ 377.99 USD

Add to Wish List

Installing a new set of shocks and struts in your BMW? Turner has your back with this complete "cup kit", which contains all the necessary components for ensuring a lasting installation.

See "kit contents" for a detailed list of all components included with this purchase.

Show More Show Less

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

T#:15677578

Part#: 07119907135-KT

In Stock

$ 581.75 USD

Add to Wish List

Qty

$ 581.75 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

KMAC Front Adjustable Inner Thrust Arm Bushing

T#:27205341

Part#: 193316-1H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Experience effortless caster adjustment with KMAC's premium inner thrust arm bushings.

Key Features:

1. Patented Design: Enjoy precise adjustments with a single wrench, even under load directly on the alignment rack.

2. Simplified Adjustment: Say goodbye to inaccurate multi-bolt systems and time-consuming disassembly for readjustments.

3. Extensive Adjustment Range: Benefit from the largest and strongest adjustment range available.

4. Mono Ball/Dual-Axis Bushings

5. Enhance brake and steering response with these high-performance bushings.

6. Superior Design: Our unique design surpasses traditional steel spherical bearings, offering over 2 ½ times the load-bearing and impact area.

Upgrade your vehicle's handling and responsiveness with KMAC's innovative inner thrust arm bushings.

Show More Show Less

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

T#:41289766

Part#: 31521428678TKT

Back Ordered

$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.

Project Cars

SELECT YOUR BMW

BMW Suspension Bushings & Mounts

Sub-Categories

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

Rear Differential Mounts - OEM/Meyle HD Rubber - E46, X3, Z4 ...

Rear Traction Arm Knuckle Bushing - F2X/F3X

Cup Kit/Coilover Installation Kit

SPL Parts Non-Adjustable Front Caster Rod Bushings - F2X/F3X 2 and 3 ...

E46 non-M OEM/HD Rear Subframe Mount Set

Replacement Bushings for Rear Shock Tower Mounts

ECS & Turner Performance Drivetrain Bushing Package - E82/88 E9X N52 ...

Adjustable Front Camber Bushings

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

Cup Kit/Coilover Installation Kit

Cup Kit/Coilover Installation Kit

Complete Performance Polyurethane Differential And Subframe Bushing S...

Rear Shock Mount Refresh Kit

Coilover Installation/Cup Kit - Front - 5-Bolt Strut Mount

Cup Kit/Coilover Installation Kit - With Spring Pads (3-Bolt M10) ...

KMAC Front Adjustable Inner Thrust Arm Bushing

Front Differential Input Seal Kit - E46, E53, E60, E61, F30

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results