Fuel Injectors

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

Injector Seal

T#:15015295

Part#: 13537591006

In Stock

Sale - Save 10% $ 4.39

This product was last offered at the strikethrough price on
08-14-2026

$ 3.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 4.39

This product was last offered at the strikethrough price on
08-14-2026

$ 3.95 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

BMW N54 N63 N74 Injector Seal - Priced Each

T#:6460319

Part#: 13537584315

In Stock

Sale - Save 10% $ 3.85

This product was last offered at the strikethrough price on
08-14-2026

$ 3.47 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3.85

This product was last offered at the strikethrough price on
08-14-2026

$ 3.47 USD

Add to Wish List

BMW N54 N63 N74 Injector Seal is a crucial component for maintaining the performance and efficiency of your BMW's fuel injection system. This high-quality seal, located at the end of the injector, ensures a tight fit, preventing fuel leaks and maintaining optimal engine operation. Each seal is sold individually, with one required per injector, making it an essential part of any injector maintenance or replacement.

Precision Fit: Specifically designed for BMW N54, N63, and N74 engines.
Prevents Fuel Leaks: Ensures a secure seal at the injector tip.
Maintains Engine Efficiency: Helps maintain optimal engine performance by preventing air and fuel leaks.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Replacement: Direct fitment for hassle-free installation.

Show More Show Less

Elring Fuel Injector O-Ring - M54 M52 (09/1998+)

T#:362419

Part#: 13641437486

In Stock

Sale - Save 10% $ 3.08

This product was last offered at the strikethrough price on
08-14-2026

$ 2.77 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3.08

This product was last offered at the strikethrough price on
08-14-2026

$ 2.77 USD

Add to Wish List

The O ring that is located on the engine side of the injector. Best to replace whenever removing the fuel injectors for any reason.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Measurements: 9.2x2.8

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Elring gaskets. Choose OE quality gaskets and seals and do the job right the first time.

Show More Show Less

O-Ring 2,8x1,5 FPM SH70

T#:15081503

Part#: 13537794553

In Stock

Sale - Save 35% $ 2.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1.93 USD

Add to Wish List

Qty

Sale - Save 35%

$ 2.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1.93 USD

Add to Wish List

Replace your Injector o-rings whenever you change your injectors!

Elring Fuel Injector O-Ring - N52 3.0L

T#:362791

Part#: 13647531313

In Stock

Sale - Save 51% $ 3.99

This product was last offered at the strikethrough price on
04-07-2026

$ 1.97 USD

Add to Wish List

Qty

Sale - Save 51%

$ 3.99

This product was last offered at the strikethrough price on
04-07-2026

$ 1.97 USD

Add to Wish List

These o-rings need to be replaced any time that the fuel injectors are pulled. These have a habit of swelling and can tear or suffer other damage when being reinstalled or when removed. If the seal is not tight, this could lead to a fuel leak or worse.This Elring o-ring will ensure the seal is nice and tight

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Show More Show Less

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

T#:26038542

Part#: BMW-EPI-950

Ships on Sep 9, 2026

$ 1,188.00 USD

Add to Wish List

Qty

$ 1,188.00 USD

Add to Wish List

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

BMW Port Injection Kit - B58 2015+

T#:38890887

Part#: BMS-PIK-B58

Ships on Sep 9, 2026

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.

Show More Show Less

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Project Cars

SELECT YOUR BMW

VTT N54 Vacuum Pump Block Off Plate

VTT BMW N54 “DI Injector” Delete Kit

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

Injector Seal

BMW N54 N63 N74 Injector Seal - Priced Each

Elring Fuel Injector O-Ring - M54 M52 (09/1998+)

O-Ring 2,8x1,5 FPM SH70

Elring Fuel Injector O-Ring - N52 3.0L

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...

BMW Port Injection Kit - B58 2015+

PFS Port Injection Kit - B58

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results