Fuel Injectors

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Ships in 9 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Ships in 4 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

Ships in 9 Business Days

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks Multi-Port Injection Kit - 750cc - BMW B58 3.0L ...

T#:1316816

Part#: 601-0175

Ships in 5 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection and a tune (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Precision Raceworks' Multiport Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the Precision Raceworks kit is the industry leader and only plate style kit featuring even fuel distribution across all 6 cylinders. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

T#:1316810

Part#: 601-0015

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

T#:5229453

Part#: 601-0166

Ships in 9 Business Days

$ 689.99 USD

Add to Wish List

Qty

$ 689.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 330cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi). Additionally, we offer a further upgrade to 750cc* injectors! These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW S55 3.0L ...

T#:38094345

Part#: 601-0189

Ships in 9 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1200cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

High Flow Direct Injector Upgrade - BMW S63

T#:27405447

Part#: 201-0399

Ships in 9 Business Days

$ 2,454.99

This product was last offered at the strikethrough price on
03-02-2026

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

The Precision Raceworks S63 High Flow Direct Injector Upgrade is tailored to enhance the performance of BMW M5, M6, X5M, and X6M models by boosting fuel output and ensuring compatibility with Ethanol. Here's a detailed breakdown of its features and specifications: **Key Features:** 1. **Enhanced Fuel Output:** These injectors deliver 31% more fuel per injector compared to standard EU5 injectors, resulting in a substantial increase in power potential. 2. **Seamless Installation:** Designed to mirror the dimensions of stock S63 injectors and equipped with identical connectors, eliminating the need for extra harnesses or spacers during installation. 3. **Ethanol Compatibility:** Fully compatible with Ethanol (E85), allowing users to capitalize on the advantages of this fuel type. 4. **OEM-Inspired Spray Pattern:** Ensures efficient fuel delivery and optimal engine performance, replicating OEM-like spray patterns. 5. **Comprehensive Installation Guide:** Each kit includes a detailed installation guide, facilitating a smooth and trouble-free setup process. **Performance Specs:** - **Gasoline WHP Potential:** Up to 1300 WHP - **E85 WHP Potential:** Up to 975 WHP - **Flow Rate:** 20.2 g/s @ 100 bar (31% increase over stock) - **Max Operating Pressure:** 250 bar / 25MPa / 3625psi **Frequently Asked Questions:** 1. **Do these injectors require coding?** - While not obligatory, coding the injectors is highly recommended to optimize their performance and enhance idle quality by eliminating compensations specific to older injectors. 2. **What software can I use to code my injectors?** - Compatible service tools include Bimmer Geeks ProTool, BMW ISTA+, Autel MaxiSys service tools, ANSEL BM700, and potentially other software options. In summary, the Precision Raceworks S63 High Flow Direct Injector Upgrade delivers substantial performance enhancements and offers flexibility in fuel choice, empowering BMW enthusiasts to unlock the full potential of their vehicles.

Show More Show Less

BMW N54 N63 N74 Injector Seal - Priced Each

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:6460319

Part#: 13537584315

In Stock

Sale - Save 10% $ 3.85

This product was last offered at the strikethrough price on
08-14-2026

$ 3.47 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3.85

This product was last offered at the strikethrough price on
08-14-2026

$ 3.47 USD

Add to Wish List

BMW N54 N63 N74 Injector Seal is a crucial component for maintaining the performance and efficiency of your BMW's fuel injection system. This high-quality seal, located at the end of the injector, ensures a tight fit, preventing fuel leaks and maintaining optimal engine operation. Each seal is sold individually, with one required per injector, making it an essential part of any injector maintenance or replacement.

Precision Fit: Specifically designed for BMW N54, N63, and N74 engines.
Prevents Fuel Leaks: Ensures a secure seal at the injector tip.
Maintains Engine Efficiency: Helps maintain optimal engine performance by preventing air and fuel leaks.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Replacement: Direct fitment for hassle-free installation.

Show More Show Less

Elring Fuel Injector O-Ring - M54 M52 (09/1998+)

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:362419

Part#: 13641437486

In Stock

Sale - Save 10% $ 3.08

This product was last offered at the strikethrough price on
08-14-2026

$ 2.77 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3.08

This product was last offered at the strikethrough price on
08-14-2026

$ 2.77 USD

Add to Wish List

The O ring that is located on the engine side of the injector. Best to replace whenever removing the fuel injectors for any reason.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Measurements: 9.2x2.8

If you drive a European vehicle, chances are high your vehicle came equipped with one or more Elring gaskets. Choose OE quality gaskets and seals and do the job right the first time.

Show More Show Less

Elring Fuel Injector O-Ring - N52 3.0L

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:362791

Part#: 13647531313

In Stock

Sale - Save 51% $ 3.99

This product was last offered at the strikethrough price on
04-07-2026

$ 1.97 USD

Add to Wish List

Qty

Sale - Save 51%

$ 3.99

This product was last offered at the strikethrough price on
04-07-2026

$ 1.97 USD

Add to Wish List

These o-rings need to be replaced any time that the fuel injectors are pulled. These have a habit of swelling and can tear or suffer other damage when being reinstalled or when removed. If the seal is not tight, this could lead to a fuel leak or worse.This Elring o-ring will ensure the seal is nice and tight

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Show More Show Less

B58 Port Injection Kit - Black - 950cc Injectors

T#:3239419

Part#: 601-0187

Ships in 9 Business Days

$ 1,449.99 USD

Add to Wish List

Qty

$ 1,449.99 USD

Add to Wish List

Injector Seal

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15015295

Part#: 13537591006

In Stock

Sale - Save 10% $ 4.39

This product was last offered at the strikethrough price on
08-14-2026

$ 3.95 USD

Add to Wish List

Qty

Sale - Save 10%

$ 4.39

This product was last offered at the strikethrough price on
08-14-2026

$ 3.95 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

O-Ring 2,8x1,5 FPM SH70

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15081503

Part#: 13537794553

In Stock

Sale - Save 35% $ 2.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1.93 USD

Add to Wish List

Qty

Sale - Save 35%

$ 2.99

This product was last offered at the strikethrough price on
08-14-2026

$ 1.93 USD

Add to Wish List

Replace your Injector o-rings whenever you change your injectors!

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004857

Part#: 201-0260

Ships in 5 Business Days

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 55% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N20/...

T#:38262762

Part#: 601-0267

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant (other than injectors). Simply pick up this kit and pair it with your favorite injectors and injector controller and you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N54/...

T#:38262760

Part#: 601-0227

Ships in 9 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N20/N26 2.0...

T#:38262761

Part#: 601-0167

Ships in 9 Business Days

$ 929.99 USD

Add to Wish List

Qty

$ 929.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 750cc* injectors (this flow rate is based on industry injector flow test pressure of 43.5psi). These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

T#:50521401

Part#: 201-0485

Ships in 9 Business Days

$ 2,099.00 USD

Add to Wish List

Qty

$ 2,099.00 USD

Add to Wish List

Precision Raceworks' upgraded S58/B58 Direct Injectors directly replace your factory injectors, offering 26% more fuel flow than stock S58 injectors and 60% more flow than stock B58 Gen 2 injectors

Black Market Parts Multi-Port Injection Kit - 750cc - BMW S55 3.0L ...

T#:1316815

Part#: 601-0016

Ships in 8 Business Days

$ 759.99 USD

Add to Wish List

Qty

$ 759.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - No Injectors Included -...

T#:21703012

Part#: 601-0223

Ships in 9 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection (except injectors) and is 100% e85 compliant. Simply pick up this kit and pair it with your favorite injectors and injector controller and you are ready to go!

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

Starting at $ 9.99 USD

Add to Wish List

Starting at $ 9.99 USD

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

Precision Raceworks Upgraded Direct Injectors - Stage 2 (17.3 G/s) - ...

T#:47679261

Part#: 201-0426

Ships in 9 Business Days

$ 1,920.00 USD

Add to Wish List

Qty

$ 1,920.00 USD

Add to Wish List

Direct Injection fuel system upgrades for the B58 Gen 1 are finally here! Precision Raceworks Stage 2 injectors are for those looking to push their B58 Gen 1 to the next level without the need for port injection!

Show More Show Less

Precision Raceworks Upgraded Direct Injectors - Stage 1 (14.1 G/s) - ...

T#:47679260

Part#: 201-0425

Ships in 9 Business Days

$ 1,458.00 USD

Add to Wish List

Qty

$ 1,458.00 USD

Add to Wish List

Direct Injection fuel system upgrades for the B58 Gen 1 are finally here! Precision Raceworks Stage 1 injectors are for those looking to push their B58 Gen 1 to the next level without the need for port injection!

Show More Show Less

Project Cars

SELECT YOUR BMW

VTT N54 Vacuum Pump Block Off Plate

VTT BMW N54 “DI Injector” Delete Kit

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

Precision Raceworks In-Line Micro Regulator - 5 Bar

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

Precision Raceworks In-Line Micro Regulator - 6 Bar

Precision Raceworks Multi-Port Injection Kit - 750cc - BMW B58 3.0L ...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

Black Market Parts Multi-Port Injection Kit - 950cc - BMW S55 3.0L ...

High Flow Direct Injector Upgrade - BMW S63

BMW N54 N63 N74 Injector Seal - Priced Each

Elring Fuel Injector O-Ring - M54 M52 (09/1998+)

Elring Fuel Injector O-Ring - N52 3.0L

B58 Port Injection Kit - Black - 950cc Injectors

Injector Seal

O-Ring 2,8x1,5 FPM SH70

PFS Port Injection Kit - B58

Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N20/...

Black Market Parts Multi-Port Injection Kit - No Injectors - BMW N54/...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N20/N26 2.0...

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW S55 3.0L ...

Precision Raceworks In-Line Micro Regulator - 4 Bar

Black Market Parts Multi-Port Injection Kit - No Injectors Included -...

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

Precision Raceworks Upgraded Direct Injectors - Stage 2 (17.3 G/s) - ...

Precision Raceworks Upgraded Direct Injectors - Stage 1 (14.1 G/s) - ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results