Find Parts That Fit Your Vehicle

Fuel Pump

BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Sort By:

Dorch Engineering - Corporate Logo
T#:55533485
Part#: DE-582-25A
Ships in 4 Business Days
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533487
Part#: DE-582-25TS
In Stock
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51778123
Part#: VTT-S58-SINGLE-H
In Stock
New Item
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533507
Part#: DE-55-25B
In Stock
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533486
Part#: DE-582-25B
In Stock
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55461364
Part#: DE-581-25B
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533476
Part#: DE-55-15B
In Stock
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
The Dorch DS15B High-Pressure Fuel Pump Upgrade is the definitive choice for drivers demanding uncompromised fuel delivery under heavy load. The stock pump simply cannot keep up with the volume required for upgraded turbos
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55461365
Part#: DE-581-25C
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
In Stock
New Item
$ 2,399.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:26938343
Part#: PFS-LPFP-X3/4M-N
In Stock
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55461367
Part#: DE-55-15A
Ships in 4 Business Days
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
Eliminate the fueling limits and maintain factory-level reliability with the Dorch Engineering DS15 HPFP Upgrade. This "Stage 1.5" pump replaces the successful DS1, engineered specifically to handle the flow demands of aggressive tuning
Show More Show Less


Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Ships in 4 Business Days
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55713521
Part#: DE-582-30B
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

Dorch Engineering - Corporate Logo
T#:55569525
Part#: DE-LK-1049-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533510
Part#: DE-581-30B
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55569521
Part#: DE-LK-1049-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.
Dorch Engineering - Corporate Logo
T#:55713520
Part#: DE-582-30A
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

Dorch Engineering - Corporate Logo
T#:55713519
Part#: DE-582-30TS
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

Vargas Turbo Technologies - Corporate Logo
T#:52305464
Part#: STGN-SB-1-N54-MT
Ships in 10 Business Days
New Item
$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
The VTT Single Barrel for Manual Transmissions is the "Stage 1" of the Shotgun family, providing a massive headroom increase over the stock setup.
Dorch Engineering - Corporate Logo
T#:55533511
Part#: DE-581-30C
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Upgraded Low Pressure Fuel Pump Assembly
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:14188788
Part#: R420-0002
Ships in 5 Business Days
Sale - Save 10% $ 1,449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,304.96 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,449.99

This product was last offered at the strikethrough price on
07-31-2026

$ 1,304.96 USD
Free Shipping on orders $49 and up
As power output increases, the demand for low-pressure fuel pumps increases. This kit includes components to upgrade your low-pressure fuel pump to deliver consistent fuel flow regardless of the amount of fuel inside the tank while increasing tank drawing. Best of all, the modified pump can be properly controlled by the DME and will result in no fault codes. Complete modified fuel pump Increases tank draw Consistent fuel flow Works seamlessly with existing DME For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:26938293
Part#: PFS-LPFP-G8X-NEW
Back Ordered
$ 1,763.99 USD
Free Shipping
$ 1,763.99 USD
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series S58. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand new PFS bucket
Show More Show Less